Can this version for 100b and 100c be used also for 100e?
Hello,I checked that my SX730 HS has firmware version 100b. I've made a firmware dump of it:
You can try the build in post 21 above.
- Display updating is ugly / has usual Digic 6 limitations
- DNG color matrix is incorrect (copied from sx60hs) but usable
I sucessfully booted this build using 'firmware update' and used info from this post as a check-list for quick testing. Most of the features listed as 'tested' seem to work fine.
This flickering is actually the most noticeable issue (hardware problem as far as I understand).
Quote from: reyalp on 19 / December / 2019, 23:24:54- DNG color matrix is incorrect (copied from sx60hs) but usableI've checked this and to my mind it's only a little bit off and not something that cannot be fixed by post processing. Overall, RAW/DNG1.1/DNG1.3 is Ok.
Hallo, hier ist canon powershot sx730 hs Firmware 100E Dump https://drive.google.com/drive/folders/1c9HDJrF8ZdcfdQy0QdFYQjwsuZJUKoWx?usp=sharing
Started by bobble
« 1 2 ... 61 62 »
General Discussion and Assistance
Started by msaddicted
Started by nafraf
« 1 2 ... 15 16 »
Started by reyalp
« 1 2 ... 16 17 »
Started by MaximusNYC