IXUS 285 ( IXUS285 )

bbk

6

Re: IXUS 285 ( IXUS285 )

« Reply #30 on: 08 / September / 2020, 10:26:41 »

Advertisements

Quote from: blackhole on 08 / September / 2020, 04:04:54

Thanks, the values in the trunk are definitely wrong for this camera.
This test build should fix that.
Now you can also try the fw-update method to load the chdk.
Let me know if you find any other problems.
If all goes well, I will replace the source code in the previous post with the final version.

Tried with the fw-update method. Havent tried making the SD card bootable.
It works well with all the test cases you mentioned as expected.

I tried some lua scripts . Just some glitches here and there - else all is fine ! Thanks a lot .
Is there a git repo youplace the source code for the same ? Possible to share it ?

Logged

blackhole

923
A590IS 101b

Re: IXUS 285 ( IXUS285 )

« Reply #31 on: 08 / September / 2020, 10:56:12 »

Quote from: bbk on 08 / September / 2020, 10:26:41

Tried with the fw-update method. Havent tried making the SD card bootable.
It works well with all the test cases you mentioned as expected.

I tried some lua scripts . Just some glitches here and there - else all is fine ! Thanks a lot .
Is there a git repo youplace the source code for the same ? Possible to share it ?

Thanks for testing!
Here you can find the complete toolchain for compiling chdk if you are using Windows OS: https://chdk.setepontos.com/index.php?topic=12752.0
The source code will be automatically downloaded for all supported cameras.
The source code is also available here: https://subversion.assembla.com/svn/chdk/trunk

The final source code is attached.

ixus285_elph360hs-100c-src.zip (58.28 kB - downloaded 56 times.)

Logged

http://astrofoto.pondi.hr

bbk

6

Re: IXUS 285 ( IXUS285 )

« Reply #32 on: 09 / September / 2020, 04:52:49 »

Quote from: blackhole on 08 / September / 2020, 10:56:12

Thanks for testing!
Here you can find the complete toolchain for compiling chdk if you are using Windows OS: https://chdk.setepontos.com/index.php?topic=12752.0
The source code will be automatically downloaded for all supported cameras.
The source code is also available here: https://subversion.assembla.com/svn/chdk/trunk

The final source code is attached.

Great ! Thanks a lot @blackhole
Is there a thread that I can find where general discussion on ongoing developments in supporting scripts ( lua ) are discussed ?

Logged

blackhole

923
A590IS 101b

Re: IXUS 285 ( IXUS285 )

« Reply #33 on: 09 / September / 2020, 12:50:58 »

Quote from: bbk on 09 / September / 2020, 04:52:49

Is there a thread that I can find where general discussion on ongoing developments in supporting scripts ( lua ) are discussed ?

I have no idea but you can always open a new topic.

Logged

http://astrofoto.pondi.hr

fe50

3139
IXUS50 & 860, SX10 Star WARs-Star RAWs

Re: IXUS 285 ( IXUS285 )

« Reply #34 on: 19 / September / 2020, 11:15:16 »

Quote from: fe50 on 19 / September / 2020, 11:14:49

Added the
IXUS 285 / ELPH 360HS 1.00C
full 32MB dump by bbk from this forum post to the CHDK P&S FW dumps repository.

Logged

-->FIRMWARE DUMPS<-- * Manual * Lua * me

reyalp

14003

Re: IXUS 285 ( IXUS285 )

« Reply #35 on: 20 / October / 2020, 01:34:55 »

@blackhole

Quote from: blackhole on 19 / October / 2020, 11:20:32

The ixus 285 also has the wrong GPIO address in the source code but it was recently reported that the test version works well with the correct GPIO address (0xC022F48C). That needs to change. There are no reports of any other problems with this camera.

Is that just

Code: [Select]

   *(int*)(0x2dc8) = (*(int*)0xC022F484)&0x80000 ? 0x40000 : 0x20000;

in boot.c, with no changes to the other values?

Logged

Don't forget what the H stands for.

blackhole

923
A590IS 101b

Re: IXUS 285 ( IXUS285 )

« Reply #36 on: 20 / October / 2020, 02:34:32 »

Quote from: reyalp on 20 / October / 2020, 01:34:55

Is that just
Code: [Select]
*(int*)(0x2dc8) = (*(int*)0xC022F484)&0x80000 ? 0x40000 : 0x20000;in boot.c, with no changes to the other values?

Address and other values are incorrect.
The correct code is:

Code: [Select]

*(int*)(0x2dc8) = (*(int*)0xC022F48C)&0x80000 ? 0x80000 : 0x40000;

Logged

http://astrofoto.pondi.hr

reyalp

14003

Re: IXUS 285 ( IXUS285 )

« Reply #37 on: 22 / October / 2020, 01:22:08 »

Quote from: blackhole on 20 / October / 2020, 02:34:32

Address and other values are incorrect.
The correct code is:
Code: [Select]
*(int*)(0x2dc8) = (*(int*)0xC022F48C)&0x80000 ? 0x80000 : 0x40000;

Thanks, added in trunk 5599.

Logged

Don't forget what the H stands for.

fishki

3

Re: IXUS 285 ( IXUS285 )

« Reply #38 on: 12 / May / 2022, 17:46:47 »

Hello guys!

Sorry for resurrecting this thread, but I do not see another option. Is it possible to get the latest build of IXUS 285 CHDK? I have tried Windows and Linux compilation options but either files are unavailable or tools are too old/new, and I've been at it for a few days and it's a mess ... If it's possible that somebody can drop a build here, that's be VERY AWESOME!

Thanks in advance!

Logged