limiting min and max canon firmware shutterspeed

waterwingz

12032

Re: limiting min and max canon firmware shutterspeed

« Reply #10 on: 10 / January / 2019, 21:07:58 »

Advertisements

Quote from: reyalp on 10 / January / 2019, 16:41:43

It really shouldn't take much more than the snippet I posted earlier, something like
Code: [Select]
function my_shoot() <snip> end

The kap_uav.lua script does something similiar, (lines 788 to 830) except that it pushes Tv up to a user defined max value and then adjusts Av and/or Sv so that the overall exposure stays correct.

Logged

Ported : A1200 SD940 G10 Powershot N G16

Mlapse

239
A480 A490 S95 M10

Re: limiting min and max canon firmware shutterspeed

« Reply #11 on: 11 / January / 2019, 03:44:01 »

had a few moment and had to change the snippet to: "if get_tv96() <" to do what I wanted (limit lowest speed, not highest)
thanks for this helpful snippet.....getting back to the drawing board now.

Logged

frustration is a key ingredient in progress

Mlapse

239
A480 A490 S95 M10

Re: limiting min and max canon firmware shutterspeed

« Reply #12 on: 11 / January / 2019, 14:59:01 »

well, I can only say thank you very much reyalp. this snippet is exacly what i wanted!

I am in the process of building a test rig and script to sort out what would be my ideal exposure limits..at this moment it looks like 1.6sec@iso400 or similar but better 3.2@iso200 is a good starting point.

« Last Edit: 11 / January / 2019, 15:07:06 by Mlapse »

Logged

frustration is a key ingredient in progress