What is the state of M100 support? - General Discussion and Assistance - CHDK Forum
« previous next »
Pages: [1]   Go Down

What is the state of M100 support?

  • 9 Replies
  • 7216 Views
*

Offline psxpetey

  • *
  • 13
What is the state of M100 support?
« on: 30 / May / 2019, 19:11:32 »
Advertisements
I want clean hdmi and Iwas wondering if chdk support for m100 is going anywhere? my model is a 100a
« Last Edit: 30 / May / 2019, 19:33:55 by psxpetey »
Logged
*

Offline reyalp

  • ******
  • 13840
Re: What is the state of M100 support?
« Reply #1 on: 31 / May / 2019, 01:11:04 »
Quote from: psxpetey on 30 / May / 2019, 19:11:32
I want clean hdmi and Iwas wondering if chdk support for m100 is going anywhere? my model is a 100a
There is no CHDK for M100 or any other Digic 7 based camera yet.

It's possible the Canon Basic approach discussed in https://chdk.setepontos.com/index.php?topic=13489.msg138708#msg138708 could work for M100. Note the script there would need to be adjusted for M100.
Logged
Don't forget what the H stands for.
*

Offline psxpetey

  • *
  • 13
Re: What is the state of M100 support?
« Reply #2 on: 31 / May / 2019, 08:25:43 »
Quote from: reyalp on 31 / May / 2019, 01:11:04
Quote from: psxpetey on 30 / May / 2019, 19:11:32
I want clean hdmi and Iwas wondering if chdk support for m100 is going anywhere? my model is a 100a
There is no CHDK for M100 or any other Digic 7 based camera yet.

It's possible the Canon Basic approach discussed in https://chdk.setepontos.com/index.php?topic=13489.msg138708#msg138708 could work for M100. Note the script there would need to be adjusted for M100.

Ya I read that. I'm wondering if anyones working on it, is it dead in the water? I love my 100 but I'm starting to need more features like the ones chdk and magic provide.
is there a lack of interest in digic 7 cams?
I might give the basic scripts a try, a loooooooot of reading here to do first tho lol
Logged
*

Offline reyalp

  • ******
  • 13840
Re: What is the state of M100 support?
« Reply #3 on: 31 / May / 2019, 12:58:01 »
Quote from: psxpetey on 31 / May / 2019, 08:25:43
Ya I read that. I'm wondering if anyones working on it, is it dead in the water? I love my 100 but I'm starting to need more features like the ones chdk and magic provide.
is there a lack of interest in digic 7 cams?
It's not lack of interest. Digic 7 uses a different ARM variant than previous cameras. Supporting it (if possible) requires significant reverse engineering work by someone who has a digic 7 cameras. Philmoz has done a bit of work on G7X II (https://chdk.setepontos.com/index.php?topic=13773.0) but so far there are difficulties getting to boot correctly.

Quote
I might give the basic scripts a try, a loooooooot of reading here to do first tho lol
It's likely someone here can come up with the right addresses. I'll try to take a look this weekend if @srsa_4c doesn't chime in before that.

We already have a dump of m100 100a in the archive, and some previous discussion about it https://chdk.setepontos.com/index.php?topic=13699.0
Logged
Don't forget what the H stands for.
*

Offline srsa_4c

  • ******
  • 4450
Re: What is the state of M100 support?
« Reply #4 on: 31 / May / 2019, 19:09:01 »
I posted a script in the clean overlay thread.
Logged
*

Offline psxpetey

  • *
  • 13
Re: What is the state of M100 support?
« Reply #5 on: 01 / June / 2019, 12:14:42 »
Quote from: srsa_4c on 31 / May / 2019, 19:09:01
I posted a script in the clean overlay thread.

awesome ill give it a try tonight and report back
Logged
*

Offline psxpetey

  • *
  • 13
Re: What is the state of M100 support?
« Reply #6 on: 02 / June / 2019, 22:57:58 »
Quote from: srsa_4c on 31 / May / 2019, 19:09:01
I posted a script in the clean overlay thread.
maybe I did something wrong but it didn't run I pm'd you about it
Logged
*

Offline psxpetey

  • *
  • 13
Re: What is the state of M100 support?
« Reply #7 on: 03 / June / 2019, 09:48:33 »
Quote from: srsa_4c on 31 / May / 2019, 19:09:01
I posted a script in the clean overlay thread.
  looks like i doing something wrong I cant make a dump either
Logged
*

Offline psxpetey

  • *
  • 13
Re: What is the state of M100 support?
« Reply #8 on: 03 / June / 2019, 10:22:25 »
Quote from: srsa_4c on 31 / May / 2019, 19:09:01
I posted a script in the clean overlay thread.

alrighty i just messed something up lol i didnt put the correct line in script.req, or DC_scriptdisk, I changed it and retryed my dump and it worked, then i tried your script and it provides a 100% clean hdmi signal! no facebox nothing! great job dude ill repost this on the main thread of your post so people know it works!
Logged
*

Offline stealtheye95

  • *
  • 8
Re: What is the state of M100 support?
« Reply #9 on: 06 / June / 2020, 04:06:24 »
So to answer the question of this thread, state of support is non-existent :(. No MagicLantern, no CHDK, I can't even find the 100a firmware to rollback to because my M100 seems to just ignore every attempt to run a basic script for clean HDMI and no auto screen off.
Logged
Pages: [1]   Go Up
« previous next »
 

Related Topics