Ixus 185 porting thread - page 7 - DryOS Development - CHDK Forum
« previous next »
Pages: 1 2 3 4 5 6 [7]   Go Down

Ixus 185 porting thread

  • 68 Replies
  • 25668 Views
*

Offline reyalp

  • ******
  • 14128
Re: Ixus 185 porting thread
« Reply #60 on: 27 / August / 2019, 20:33:26 »
Advertisements
FWIW, I'm not against renaming it. The Canon Museum link should be official enough to know the "Elph 185" name was allocated for this model isn't likely to be re-used on a *different* model any time soon, and I don't think it will hurt anything on our side.

In fact the mighty-hoernsche.de autobuild script has code that tries to split the ixus_whatever to list both, which might get confused by a bare ixus.
Logged
Don't forget what the H stands for.
*

Offline gjl2599

  • *
  • 11
Re: Ixus 185 porting thread
« Reply #61 on: 28 / August / 2019, 07:58:14 »
Quote from: srsa_4c on 27 / August / 2019, 17:44:00
Are there any remaining issues regarding this model? If not, we should perhaps release this port officially.
So far, I have tested 61 of 258 features (based on the CHDK 1.3 manual). There are no outstanding failures to date, either from targeted tests or ad hoc usage.  Given limitations on available time, it will realistically take me several weeks elapsed to work through the list.
« Last Edit: 28 / August / 2019, 08:47:47 by gjl2599 »
Logged
Regards - gjl2599
*

Offline reyalp

  • ******
  • 14128
Re: Ixus 185 porting thread
« Reply #62 on: 28 / August / 2019, 12:18:24 »
Quote from: gjl2599 on 28 / August / 2019, 07:58:14
So far, I have tested 61 of 258 features (based on the CHDK 1.3 manual). There are no outstanding failures to date, either from targeted tests or ad hoc usage.  Given limitations on available time, it will realistically take me several weeks elapsed to work through the list.
I think the testing you've done so far is much more thorough than most ports, so I have no objection to including it in the autobuild.
Logged
Don't forget what the H stands for.
*

Offline srsa_4c

  • ******
  • 4451
Re: Ixus 185 porting thread
« Reply #63 on: 28 / August / 2019, 19:23:43 »
Quote from: reyalp on 27 / August / 2019, 20:33:26
FWIW, I'm not against renaming it. The Canon Museum link should be official enough to know the "Elph 185" name was allocated for this model isn't likely to be re-used on a *different* model any time soon, and I don't think it will hurt anything on our side.

In fact the mighty-hoernsche.de autobuild script has code that tries to split the ixus_whatever to list both, which might get confused by a bare ixus.
If you think renaming is the better choice, feel free to do it. And in that case, you can also enable autobuild.
Logged
*

Offline reyalp

  • ******
  • 14128
Re: Ixus 185 porting thread
« Reply #64 on: 29 / August / 2019, 02:54:23 »
Quote from: srsa_4c on 28 / August / 2019, 19:23:43
If you think renaming is the better choice, feel free to do it. And in that case, you can also enable autobuild.
Both done.

Not sure it was the better choice, but it seemed easier than messing with the TCL code that runs the autobuild :-[
Logged
Don't forget what the H stands for.
*

Offline dmitrys

  • ****
  • 267
Re: Ixus 185 porting thread
« Reply #65 on: 29 / August / 2019, 05:06:55 »
Quote from: reyalp on 29 / August / 2019, 02:54:23
Both done.
I'm not ungrateful ;)

Quote
Not sure it was the better choice, but it seemed easier than messing with the TCL code that runs the autobuild :-[
I believe it was, although I'm wondering if Canon created the American and Asian model counterparts just so some scripts of theirs run smoothly :P
Logged
Author of CHIMP, Canon Hack Installation and Management Platform
*

Offline Ģirts Korps

  • *
  • 1
Re: Ixus 185 porting thread
« Reply #66 on: 18 / September / 2019, 03:07:29 »
Hello!
Thank you for porting this device!
I have one question. Curves are not showing in the camera menu.
Thats why I wanted to ask what could be the reason of that?
Logged
*

Offline blackhole

  • *****
  • 946
  • A590IS 101b
    • Planetary astrophotography
Re: Ixus 185 porting thread
« Reply #67 on: 18 / September / 2019, 03:30:15 »
Quote from: Ģirts Korps on 18 / September / 2019, 03:07:29
Hello!
Thank you for porting this device!
I have one question. Curves are not showing in the camera menu.
Thats why I wanted to ask what could be the reason of that?
Curves are not supported on newer cameras.
Logged
*

Offline reyalp

  • ******
  • 14128
Re: Ixus 185 porting thread
« Reply #68 on: 03 / January / 2020, 01:46:03 »
edit3:
Changes checked in, trunk 5393. Build removed

Here's a test build with filewrite task implemented, along with the corresponding source path.

To test, you can use
Code: [Select]
chdkptp -e"exec require'camtests'.runbatch{shoot=true}"
Please make sure continuous shooting is enabled in the canon firmware before running the test.

edit 2020/01/05:
Replaced build with test-2 to fix a mistake I found in the elph180 version of the code. This mistake seems to have been harmless on elph180.

edit2:
And replaced with test-3 to fix a very silly mistake that made it not work at all  (I forgot to hook filewrite) :-X

« Last Edit: 06 / January / 2020, 01:04:49 by reyalp »
Logged
Don't forget what the H stands for.
Pages: 1 2 3 4 5 6 [7]   Go Up
« previous next »
 

Related Topics


SimplePortal © 2008-2014, SimplePortal