Testing some - perhaps many - cams with CHDKPTP - page 3 - General Discussion and Assistance - CHDK Forum
supplierdeeply

Testing some - perhaps many - cams with CHDKPTP

  • 65 Replies
  • 1361 Views
*

Offline reyalp

  • ******
  • 12102
Re: Testing some - perhaps many - cams with CHDKPTP
« Reply #20 on: 14 / September / 2019, 22:45:34 »
Advertisements
Thanks. Here's a test builds with CAM_PTP_USE_NATIVE_BUFFER enabled for ixus110 101d and ixus200 101c

The ixus200 failure does not seem to be exactly one of the known length bugs, but it failed in one of those tests so it seems worth trying the workaround.

I still need to think about the other failures a bit more.
Don't forget what the H stands for.

*

Offline reyalp

  • ******
  • 12102
Re: Testing some - perhaps many - cams with CHDKPTP
« Reply #21 on: 15 / September / 2019, 19:53:29 »
I made some updates (through r873) to chdkptp to possibly avoid the reconnect failure and record some additional output in the camtests.

The changes are Lua code only, so you don't need to rebuild, just use the latest Lua files. No need to re-run tests on any camera that has already been run.
Don't forget what the H stands for.

*

Offline koshy

  • *****
  • 912
Re: Testing some - perhaps many - cams with CHDKPTP
« Reply #22 on: 16 / September / 2019, 12:58:44 »
Here's a test builds with CAM_PTP_USE_NATIVE_BUFFER enabled for ixus110 101d
That still acts up. I think it crashed, at least the cam turned on when I wanted to turn it off. I saved a ROMLOG see if it helps any... I used 873.
« Last Edit: 16 / September / 2019, 13:01:51 by koshy »

*

Offline koshy

  • *****
  • 912
Re: Testing some - perhaps many - cams with CHDKPTP
« Reply #23 on: 16 / September / 2019, 13:06:42 »
The Ixus200 re-work went well...


*

Offline koshy

  • *****
  • 912
Re: Testing some - perhaps many - cams with CHDKPTP
« Reply #24 on: 16 / September / 2019, 14:37:32 »
Two more...

*

Offline reyalp

  • ******
  • 12102
Re: Testing some - perhaps many - cams with CHDKPTP
« Reply #25 on: 16 / September / 2019, 16:56:02 »
Two more...
Thanks. Failures are because I was bad and didn't test the new cam_info test on vxworks. Fixed in 874, no need to retest.
Don't forget what the H stands for.

*

Offline koshy

  • *****
  • 912
Re: Testing some - perhaps many - cams with CHDKPTP
« Reply #26 on: 16 / September / 2019, 19:05:41 »
Two more...
Thanks. Failures are because I was bad and didn't test the new cam_info test on vxworks. Fixed in 874, no need to retest.
Ah good, I didn't get around to more today so onwards with 874 later on.

*

Offline koshy

  • *****
  • 912
Re: Testing some - perhaps many - cams with CHDKPTP
« Reply #27 on: 17 / September / 2019, 19:54:01 »
a few a day...


*

Offline koshy

  • *****
  • 912
Re: Testing some - perhaps many - cams with CHDKPTP
« Reply #28 on: 17 / September / 2019, 19:56:47 »
the d10 is still from the last batch with 873

*

Offline koshy

  • *****
  • 912
Re: Testing some - perhaps many - cams with CHDKPTP
« Reply #29 on: 17 / September / 2019, 20:14:08 »
i100 failed in various ways...

 

Related Topics