Tested my remaining 7 SX series cams tonight. All passed 25/25 tests except the SX200.
Here's a test build with the bug 0x23f4 fix for sx200
Excellent, that passed 25/25 and can be checked in.
Tested all A4xxA410, the oldest shows trouble
, A480 something about a non equal message.
chdkptp -e"exec require'camtests'.runbatch{bench=true,xfersizebugs=true}"
Everything else passes all. A490 & A495 do not remote shoot in cont as expected. Both cont (c) and non cont (nc) tests included. Also SX200_II log...
With these older A series cameras the cam needs to be in play mode to be hooked up via USB. That looses the cont setting. So I guess one could connect with CHDKPTP GUI, switch to Rec, set up continuous shooting, disconnect then run the commandline tests. I didn't do that. Thus I expect most of these to have had cont disabled. You'll see...
Turned out my A710 did not want to cooperate. I switch it to Rec and it crashes / turns off. Can't turn it on unless in play mode either. That is it crahes when turned on in Rec mode. That is with or without CHDK (with or without card lock). I thought it was about energy but I tried a dozen sets of AAs and maybe it's not. Enclosing a Romlog, perhaps it's broken in some way - can you see any clues as to what's up with it?
Quote from: koshy on 10 / November / 2019, 20:05:01My guess is bit fade in flash ROM. There's a chance it can be restored. Can you make a firmware dump?
My guess is bit fade in flash ROM. There's a chance it can be restored. Can you make a firmware dump?
Started by mattkime « 1 2 » General Discussion and Assistance
Started by andrew.stephens.754365 « 1 2 3 » General Discussion and Assistance
Started by toby LUA Scripting
Started by JvdP « 1 2 » General Discussion and Assistance
Started by reyalp « 1 2 3 4 » General Discussion and Assistance