SX280 / 275 / 270 porting

srsa_4c

4046

Re: SX280 / 275 / 270 porting

« Reply #330 on: 29 / August / 2019, 16:08:47 »

Advertisements

Quote from: dmitrys on 29 / August / 2019, 15:41:31

I noticed that sx280hs-102d was removed from camera_list.csv at some point.

Are we looking at the same file?

Logged

Menu jumping/flickering on M10?

dmitrys

Re: SX280 / 275 / 270 porting

« Reply #331 on: 29 / August / 2019, 16:39:48 »

Quote from: srsa_4c on 29 / August / 2019, 16:08:47

the same file?

Whoops. It looks like something's wrong with my code. Shocker!

Logged

Author of CHIMP, Canon Hack Installation and Management Platform

dmitrys

Re: SX280 / 275 / 270 porting

« Reply #332 on: 02 / September / 2019, 14:07:09 »

I believe I found the problem.

It looks like the 102d directory was removed, not the corresponding line in camera_list.

This means 102d is an exact copy of 102c. It is my understanding that normally a directory would exist with makefile.inc containing a PLATFORMSUB override.

What am I missing?

Logged

Author of CHIMP, Canon Hack Installation and Management Platform

srsa_4c

4046

Re: SX280 / 275 / 270 porting

« Reply #333 on: 03 / September / 2019, 19:32:01 »

Quote from: dmitrys on 02 / September / 2019, 14:07:09

It looks like the 102d directory was removed

It was never there. The only adverse effect is that you can't build 102d in non-batch mode. 102d users can just build 102c as it is identical. Batch mode (tools/auto_build.sh) does not need that directory.

Logged

Menu jumping/flickering on M10?

dmitrys

Re: SX280 / 275 / 270 porting

« Reply #334 on: 04 / September / 2019, 22:31:32 »

Quote from: srsa_4c on 03 / September / 2019, 19:32:01

The only adverse effect is that you can't build 102d in non-batch mode.

Another would be CHIMP identifying 102d as 102c.

Quote

102d users can just build 102c as it is identical. Batch mode (tools/auto_build.sh) does not need that directory.

It just seems customary.

Anyway, I fixed the tool to include such a build. However, I am considering removing revision/version lists from CHIMP data altogether. Originally, I followed the example of STICK, but I now believe the downsides (maintenance overhead) outweigh the upsides (occasionally saving a server request).

Logged

Author of CHIMP, Canon Hack Installation and Management Platform

dmitrys

Re: SX280 / 275 / 270 porting

« Reply #335 on: 09 / September / 2019, 13:59:52 »

Quote from: dmitrys on 04 / September / 2019, 22:31:32

I am considering removing revision/version lists from CHIMP data altogether.

Done, alpha version available.

Logged

Author of CHIMP, Canon Hack Installation and Management Platform

koshy

1000

Re: SX280 / 275 / 270 porting

« Reply #336 on: 29 / November / 2019, 08:25:57 »

Quote from: srsa_4c on 31 / May / 2014, 17:14:41

- ~~DNG files have all their black borders.~~ Borders corrected in prealpha3.

@srsa_4c I tried shooting DNGs with an SX270 and an SX280, but can't get any. No CRW either. Not on half press, then full press, not on immediate full press, and since CHDKPTP Rec isn't supported not through that either. I used the current trunk.

Edit: Same experience with SX700 and SX710. What elese is the same between the four is that the UI overlay showing Battery and DNG count disappears every half second or so to show for another half second, no idea whether that is related...

« Last Edit: 29 / November / 2019, 08:32:19 by koshy »

Logged

Koshy had a little ELPH which wasn't white as snow but everywhere that Koshy went the ELPH was sure to go. (actually an SD, but that detail ruins the rhyme...)

srsa_4c

4046

Re: SX280 / 275 / 270 porting

« Reply #337 on: 29 / November / 2019, 11:58:52 »

Quote from: koshy on 29 / November / 2019, 08:25:57

I tried shooting DNGs with an SX270 and an SX280, but can't get any. No CRW either. Not on half press, then full press, not on immediate full press, and since CHDKPTP Rec isn't supported not through that either. I used the current trunk.

Edit: Same experience with SX700 and SX710. What elese is the same between the four is that the UI overlay showing Battery and DNG count disappears every half second or so to show for another half second, no idea whether that is related...

If I recall correctly, these might be your first DIGIC 6 cameras. A possible cause of problems could be that DIGIC 6 cams need DIGIC 6 compatible modules (those in the distribution zip files), so you do need to update the CHDK directory on card.
They all should support RAW/DNG and rec mode in CHDKPTP. RAW/DNG is disabled in certain shooting modes, but there is a warning on screen when that happens.
Try making a short video that demonstrates that blinking issue. In general, certain features case more frequent redraw of the Canon overlay, you might be seeing a consequence of that.

Logged

Menu jumping/flickering on M10?

koshy

1000

Re: SX280 / 275 / 270 porting

« Reply #338 on: 29 / November / 2019, 12:29:24 »

Quote from: srsa_4c on 29 / November / 2019, 11:58:52

If I recall correctly, these might be your first DIGIC 6 cameras. A possible cause of problems could be that DIGIC 6 cams need DIGIC 6 compatible modules (those in the distribution zip files), so you do need to update the CHDK directory on card.

Thanks a lot, indeed the first DIGIC 6 cams... You are dead on with what I did... I have a pre-configured CHDK folder of the current trunk and just updated the files in the root of the SD card. I'll see if the flickering goes away by copying a DIGIC 6 compatible CHDK directory in place and otherwise will post that video.

Edit, nothing flickers, all well behaved now so that was my fault

« Last Edit: 29 / November / 2019, 12:37:53 by koshy »

Logged

Koshy had a little ELPH which wasn't white as snow but everywhere that Koshy went the ELPH was sure to go. (actually an SD, but that detail ruins the rhyme...)