Bootable SD Card Method with real Firmware - General Help and Assistance on using CHDK stable releases - CHDK Forum
« previous next »
Pages: [1]   Go Down

Bootable SD Card Method with real Firmware

  • 3 Replies
  • 2051 Views
*

Offline c_joerg

  • *****
  • 1251
Bootable SD Card Method with real Firmware
« on: 22 / December / 2019, 06:15:10 »
Advertisements
What happens, if a SD card is prepared for the Bootable SD Card Method and there is only a real Firmware on the card?
Logged
M100 100a, M3 121a, G9x II (1.00c), 2*G1x (101a,100e), S110 (103a), SX50 (100c), SX230 (101a), S45,
Flickr https://www.flickr.com/photos/136329431@N06/albums
YouTube https://www.youtube.com/channel/UCrTH0tHy9OYTVDzWIvXEMlw/videos?shelf_id=0&view=0&sort=dd
*

Offline srsa_4c

  • ******
  • 4451
Re: Bootable SD Card Method with real Firmware
« Reply #1 on: 22 / December / 2019, 10:39:10 »
Quote from: c_joerg on 22 / December / 2019, 06:15:10
What happens, if a SD card is prepared for the Bootable SD Card Method and there is only a real Firmware on the card?
Nothing, unless you enter the Canon menu, find the "firm update" entry and click on it.
Logged
*

Offline c_joerg

  • *****
  • 1251
Re: Bootable SD Card Method with real Firmware
« Reply #2 on: 22 / December / 2019, 11:15:47 »
Quote from: srsa_4c on 22 / December / 2019, 10:39:10
Nothing, unless you enter the Canon menu, find the "firm update" entry and click on it.
My question is actually whether it is possible to carry out a Canon firmware update without a Canon menu?
For example, if parts of the firmware in the camera are destroyed.
Logged
M100 100a, M3 121a, G9x II (1.00c), 2*G1x (101a,100e), S110 (103a), SX50 (100c), SX230 (101a), S45,
Flickr https://www.flickr.com/photos/136329431@N06/albums
YouTube https://www.youtube.com/channel/UCrTH0tHy9OYTVDzWIvXEMlw/videos?shelf_id=0&view=0&sort=dd
*

Offline srsa_4c

  • ******
  • 4451
Re: Bootable SD Card Method with real Firmware
« Reply #3 on: 22 / December / 2019, 12:33:42 »
Quote from: c_joerg on 22 / December / 2019, 11:15:47
My question is actually whether it is possible to carry out a Canon firmware update without a Canon menu?
For example, if parts of the firmware in the camera are destroyed.
If the main firmware is able to start a diskboot.bin, one could create a special one that is able to reflash the damaged areas. If the damage is extensive enough, many parts of the rom would need to be copied to make diskboot functional.
In some cases (erased or damaged main fw start), the bootloader can also resort to starting diskboot.bin - if it finds one on card.
AFAIK the bootloader cannot deal with firmware update files.
Logged
Pages: [1]   Go Up
« previous next »
 

Related Topics


SimplePortal © 2008-2014, SimplePortal