Bracketing in continuous mode - page 2 - General Help and Assistance on using CHDK stable releases - CHDK Forum

Bracketing in continuous mode

  • 16 Replies
  • 909 Views
Re: Bracketing in continuous mode
« Reply #10 on: 29 / January / 2020, 02:17:45 »
Advertisements
@reyalp

Just tested and, as you say, fixed on the G7X.

Many, many thanks :)

As you my other cams. When you get a change I'd welcome the fix appearing on G1X-100g and G5X-101e  ;)

Do I assume that this fix will propagate through to other cams in a 'bulk update' process?

Once again, thanks for your very quick fix.

Cheers

Garry

*

Offline reyalp

  • ******
  • 12795
Re: Bracketing in continuous mode
« Reply #11 on: 29 / January / 2020, 02:41:03 »
@reyalp

Just tested and, as you say, fixed on the G7X.

Many, many thanks :)

As you my other cams. When you get a change I'd welcome the fix appearing on G1X-100g and G5X-101e  ;)
Attached
Quote
Do I assume that this fix will propagate through to other cams in a 'bulk update' process?
Yes, I'll add it the autobuild after I'm satisfied it doesn't break anything horribly, but as I said, it needs more testing.

I've already realized it isn't a complete fix, a half press end release without shooting will still end up in the wrong state if ISO override is set. Probably still better than the existing behavior though.
Don't forget what the H stands for.

*

Offline reyalp

  • ******
  • 12795
Re: Bracketing in continuous mode
« Reply #12 on: 02 / February / 2020, 22:08:23 »
I checked in a fix, trunk autobuild 5415. Unlike the patch posted in this thread, it should handle half press without shooting.
Don't forget what the H stands for.

Re: Bracketing in continuous mode
« Reply #13 on: 02 / February / 2020, 22:41:17 »
@reyalp

Great. Many thanks.

BTW I see 5413 online. Just for my education, will 5415 magically appear?

Also, have you managed to incorporate the DoF fix or my proposed histogram tweak ;-)

Cheers

Garry


*

Offline reyalp

  • ******
  • 12795
Re: Bracketing in continuous mode
« Reply #14 on: 02 / February / 2020, 23:20:28 »
BTW I see 5413 online. Just for my education, will 5415 magically appear?
Yes, it's there now. The autobuild usually updates within half an hour or so.

Quote
Also, have you managed to incorporate the DoF fix or my proposed histogram tweak ;-)
Not yet, I'll try to get to those next. Testing the ISO thing took a lot of time.
Don't forget what the H stands for.

Re: Bracketing in continuous mode
« Reply #15 on: 03 / February / 2020, 01:49:17 »
@reyalp

Thanks. As I said, I didn't know the process.

BTW is there a way for me to keep all my settings and update my cameras?

In other words, what's are the files I need to change out, and those I can keep?

I've been hesitant to do this so far, as I don't know if there are check sums in play.

*

Offline reyalp

  • ******
  • 12795
Re: Bracketing in continuous mode
« Reply #16 on: 03 / February / 2020, 02:13:59 »
In other words, what's are the files I need to change out, and those I can keep?
Settings are stored in the .CFG files in the CHDK directory. No CFG files are included in the builds, so you can just unzip the new build into the root of the card, overwriting all existing files with the same names. You can also back up your settings by saving the CFG files.
New builds should load CFGs from any previous 1.5 (or 1.4) build without issues.
Don't forget what the H stands for.

 

Related Topics