Histogram - Feature Requests - CHDK Forum

Histogram

  • 7 Replies
  • 2936 Views
Histogram
« on: 23 / April / 2021, 06:49:35 »
Advertisements
@reyalp

Forgive me, however, I cant remember if I requested this before.

Is there any chance, the next time you refresh the builds, you could consider increasing the size of the red dots that show under and over exposure?

They are really difficult to see, especially for those of us with old eyes ;-)

*

Offline reyalp

  • ******
  • 14125
Re: Histogram
« Reply #1 on: 23 / April / 2021, 13:21:05 »
Forgive me, however, I cant remember if I requested this before.

Is there any chance, the next time you refresh the builds, you could consider increasing the size of the red dots that show under and over exposure?

They are really difficult to see, especially for those of us with old eyes ;-)
I think you did, and I ended up putting it off because it's not quite that simple. The dots are only tiny on digic 6 and later cams. I'll try to take another look.
Don't forget what the H stands for.

Re: Histogram
« Reply #2 on: 23 / April / 2021, 13:28:34 »
@reyalp

Sorry about the repeat request, and thanks for taking another look.

One thought I had was to turn the left and right axis red, rather than put a dot on the screen, ie flag the over or under in a clearer way.

But, bluntly, anything that makes things more readable would be great; although I recognise your time is tight and this is not a priority.

Cheers

Garry

Re: Histogram
« Reply #3 on: 23 / April / 2021, 17:27:22 »
@reyalp

I’ve just taken a quick look at the histogram module, and I think it may be simple to increase the size of the dots a little.

I’m afraid I can’t compile, so I’m not going to be able to test this tweak.

The current relevant code is:

Code: [Select]

if (conf.histo_layout != OSD_HISTO_LAYOUT_R_G_B)
        {
            if (under_exposed && conf.show_overexp)
            {
                draw_ellipse(conf.histo_pos.x+5, conf.histo_pos.y+5, 3, 3, BG_COLOR(hc2), DRAW_FILLED);
            }
            if (over_exposed && conf.show_overexp)
            {
                draw_ellipse(conf.histo_pos.x+HISTO_WIDTH-5, conf.histo_pos.y+5, 3, 3, BG_COLOR(hc2), DRAW_FILLED);
            }


I’m guessing all that needs to be changed, to test things, is the 3,3 to, say, 5,5, ie leaving the position of the dots as now.

If this simple tweak worked, we could then decide if we needed to make a more radical change, ie for the under/over to be clearer.

*

Offline reyalp

  • ******
  • 14125
Re: Histogram
« Reply #4 on: 23 / April / 2021, 18:44:12 »
I’m guessing all that needs to be changed, to test things, is the 3,3 to, say, 5,5, ie leaving the position of the dots as now.

If this simple tweak worked, we could then decide if we needed to make a more radical change, ie for the under/over to be clearer.
Updated in trunk 5850. The dots are now visually about the same size as on pre-digic 6 cams with with similar screen size.

Quote
Sorry about the repeat request, and thanks for taking another look.
Feel free to bump something if it seems like I'm ignoring it. Chances are high that I just forgot.
« Last Edit: 23 / April / 2021, 18:59:46 by reyalp »
Don't forget what the H stands for.

Re: Histogram
« Reply #5 on: 24 / April / 2021, 01:27:50 »
@reyalp

Many thanks.

Sorry to ask another dumb question: where can I access trunk 5850 for the M3?

*

Offline c_joerg

  • *****
  • 1251
Re: Histogram
« Reply #6 on: 24 / April / 2021, 02:28:49 »
http://mighty-hoernsche.de/trunk/
Latest Version is 5851
M100 100a, M3 121a, G9x II (1.00c), 2*G1x (101a,100e), S110 (103a), SX50 (100c), SX230 (101a), S45,
Flickr https://www.flickr.com/photos/136329431@N06/albums
YouTube https://www.youtube.com/channel/UCrTH0tHy9OYTVDzWIvXEMlw/videos?shelf_id=0&view=0&sort=dd

Re: Histogram
« Reply #7 on: 24 / April / 2021, 02:38:26 »
@c_joerg

I was being too literal I guess, ie looking for 5850  ???

PS Histogram looks much better now  :)
« Last Edit: 24 / April / 2021, 04:30:52 by pigeonhill »

 

Related Topics


SimplePortal © 2008-2014, SimplePortal