An old memory card I installed CHDK on won't work with a new camera. - General Discussion and Assistance - CHDK Forum

An old memory card I installed CHDK on won't work with a new camera.

  • 9 Replies
  • 4112 Views
Advertisements
I installed CHDK on a Transcend 32-GB Class-10 SDHC Card for use with a Canon Powershot S100.  That camera broke, so I can't test it or use it to try to format the card, but the card always worked with it.  The card hasn't been used since then.  I got a new Canon G9X, and it shows an error message with the card inserted.  The Format option is unavailable in the camera's menu.  The computer could read that card fine, and I formatted it using Windows' tool, as well as SD Association's SD Memory Card Formatter, with the card's Lock both on and off.  I don't know what else I can do.  I tested the camera with a different card, and it works.

Is there a way to repair this problem so I can continue to use this card and not have to buy another?
« Last Edit: 10 / September / 2021, 15:48:22 by 87046 »

*

Offline Caefix

  • *****
  • 948
  • Sorry, busy deleting test shots...
Re: An old memory card I installed CHDK on won't work with a new camera.
« Reply #1 on: 10 / September / 2021, 16:11:30 »
Are there 2 driveletters in explorer? Then You would probably need a tool to undo that.  :-[
&& There´s no port nor thread for G9x.
All lifetime is a loan from eternity.

*

Offline reyalp

  • ******
  • 14125
Re: An old memory card I installed CHDK on won't work with a new camera.
« Reply #2 on: 10 / September / 2021, 21:56:35 »
I got a new Canon G9X, and it shows an error message with the card inserted.
What specific error message does the G9X show?

If the card was used for CHDK in S100, it was probably partitioned, which I think is what Caefix is suggesting.

I would expect you could use windows storage management (diskmgmt.msc, also available from the "Computer Management" app) to delete whatever partitions are there. Be sure you have the card selected (not a system drive!) if you do this.
Don't forget what the H stands for.

Re: An old memory card I installed CHDK on won't work with a new camera.
« Reply #3 on: 26 / September / 2021, 16:48:10 »
I got a new Canon G9X, and it shows an error message with the card inserted.
What specific error message does the G9X show?

If the card was used for CHDK in S100, it was probably partitioned, which I think is what Caefix is suggesting.

I would expect you could use windows storage management (diskmgmt.msc, also available from the "Computer Management" app) to delete whatever partitions are there. Be sure you have the card selected (not a system drive!) if you do this.

The error message is "Memory Card Error" and in Options, 'Format' is greyed-out.  I don't know how to get more error information.

I used Disk Manager in Windows to delete the volume, and created a new FAT32 partition.  Problem persists.

Re: An old memory card I installed CHDK on won't work with a new camera.
« Reply #4 on: 26 / September / 2021, 16:51:21 »
Are there 2 driveletters in explorer? Then You would probably need a tool to undo that.  :-[
&& There´s no port nor thread for G9x.

No, only one drive letter in Explorer (only one for this 'Disk' in Disk Management).

*

Offline reyalp

  • ******
  • 14125
Re: An old memory card I installed CHDK on won't work with a new camera.
« Reply #5 on: 26 / September / 2021, 17:53:03 »
The error message is "Memory Card Error" and in Options, 'Format' is greyed-out.  I don't know how to get more error information.

I used Disk Manager in Windows to delete the volume, and created a new FAT32 partition.  Problem persists.
Weird, I'm not aware of anyone reporting issues like this. If it is really a formatting / partitioning issue, it's possible that some other tool would fix it, but given that 32GB cards are under $5, just getting a fresh one might be the best approach.

If you do want to keep messing with it, a few ideas
1) With disk manager, delete everything all volumes/partitions from the card, eject the card, and then format it in explorer (you want to format the entire card, which will be the default in explorer, where in disk manager you might inadvertently end up with a more complicated partition table setup)
2) Use an SD specific format tool like the one from the SD card association https://www.sdcard.org/downloads/formatter/ (some SD card vendors may offer their own tools)
3) Use linux and something like gparted to examine the current configuration and/or delete whatever is there. There are various live (usb/cd bootable) distros available if you don't have a linux system.

edit:
One other thing, since the card was presumably locked when you used it with CHDK, make sure the card lock is completely in the unlock position. The camera should just say "card locked" if it's locked, but maybe it could cause problems in combination with other issues.
« Last Edit: 26 / September / 2021, 19:49:43 by reyalp »
Don't forget what the H stands for.

*

Offline Caefix

  • *****
  • 948
  • Sorry, busy deleting test shots...
Re: An old memory card I installed CHDK on won't work with a new camera.
« Reply #6 on: 27 / September / 2021, 13:27:10 »
S95, Chimp installation: 2 partitions, bootable. Explorer shows E: 14,6GB, M:\ total size 1,96MB
Swapped partitions with Chimp, still 2 driveletters.  ???
Maybe Chimp ~ detect card ~ asks for "Select Card Drive"?
Edit: => https://chdk.setepontos.com/index.php?topic=13091.msg141330#msg141330
« Last Edit: 27 / September / 2021, 13:31:13 by Caefix »
All lifetime is a loan from eternity.

*

Offline reyalp

  • ******
  • 14125
Re: An old memory card I installed CHDK on won't work with a new camera.
« Reply #7 on: 27 / September / 2021, 15:57:03 »
S95, Chimp installation: 2 partitions, bootable. Explorer shows E: 14,6GB, M:\ total size 1,96MB
Swapped partitions with Chimp, still 2 driveletters.  ???
Maybe Chimp ~ detect card ~ asks for "Select Card Drive"?
Edit: => https://chdk.setepontos.com/index.php?topic=13091.msg141330#msg141330
I don't understand this post, or the relevance of Chimp here.

87046 is trying to use the card in a G9 X, which has no CHDK port. So they just want to have the card formatted completely normally, without any CHDK stuff or partitions.
Don't forget what the H stands for.

Re: An old memory card I installed CHDK on won't work with a new camera.
« Reply #8 on: 27 / September / 2021, 21:09:25 »
S95, Chimp installation: 2 partitions, bootable. Explorer shows E: 14,6GB, M:\ total size 1,96MB
Swapped partitions with Chimp, still 2 driveletters.  ???
Maybe Chimp ~ detect card ~ asks for "Select Card Drive"?
Edit: => https://chdk.setepontos.com/index.php?topic=13091.msg141330#msg141330
I don't understand this post, or the relevance of Chimp here.

87046 is trying to use the card in a G9 X, which has no CHDK port. So they just want to have the card formatted completely normally, without any CHDK stuff or partitions.

to have it formatted completely normally, without any CHDK stuff or partitions, yes
« Last Edit: 28 / September / 2021, 14:02:00 by 87046 »

Re: An old memory card I installed CHDK on won't work with a new camera.
« Reply #9 on: 22 / October / 2021, 14:16:08 »
I'll buy a new one then.  Never even used CHDK so it wasn't worth destroying a memory card.

 

Related Topics


SimplePortal © 2008-2014, SimplePortal