Powershot g7x m2 HDMI connected and Display always on - General Help and Assistance on using CHDK stable releases - CHDK Forum
« previous next »
Pages: [1]   Go Down

Powershot g7x m2 HDMI connected and Display always on

  • 2 Replies
  • 1542 Views
*

Offline BattleDonut

  • *
  • 2
Powershot g7x m2 HDMI connected and Display always on
« on: 11 / February / 2022, 12:56:37 »
Advertisements
Hi I bought a used Canon g7xm2 last week which I would like to use on the PC as a webcam. CHDK is on it and Clean HDMI out also works  :D . Now I have two questions: 

Is there a setting where I also when a HDMI cable is connected to show a live view on the camera display?  ???

Is there a setting where I can turn off the data transfer via USB so that the camera does not go into transfer mode and stays on?

Thanks in advance
Logged
*

Offline reyalp

  • ******
  • 14125
Re: Powershot g7x m2 HDMI connected and Display always on
« Reply #1 on: 11 / February / 2022, 15:08:01 »
Quote from: BattleDonut on 11 / February / 2022, 12:56:37
Is there a setting where I also when a HDMI cable is connected to show a live view on the camera display?  ???
No. There is no known way to do this, and it's likely not supported by the firmware.
Quote
Is there a setting where I can turn off the data transfer via USB so that the camera does not go into transfer mode and stays on?
What do you intend to use USB for, if you don't want the camera to go into transfer mode? Charging? If so, I'm not aware of a way to do that.

If you enable USB remote in "CHDK settings->Remote Parameters" and set the control mode to "None", the Canon firmware will ignore the USB connection completely. However, this will also mean it won't charge, so there would be little reason to connect USB.

You can use use script to call post_levent_to_ui(4482) to re-enable the display with USB connected, but (on my sx730 at least) this also makes charging stop. It's possible it still draws some power over USB, potentially extending battery.

Note that the camera behavior is somewhat different if it thinks it's connected to a dumb power supply vs a USB port on a computer. Some additional observations on charging behavior here: https://chdk.setepontos.com/index.php?topic=13952.0
Logged
Don't forget what the H stands for.
*

Offline BattleDonut

  • *
  • 2
Re: Powershot g7x m2 HDMI connected and Display always on
« Reply #2 on: 11 / February / 2022, 15:27:35 »
Thanks for the quick reply.


Quote
What do you intend to use USB for, if you don't want the camera to go into transfer mode? Charging? If so, I'm not aware of a way to do that.

Yes my intention was to charge via USB but as you said that is unfortunately not possible.

Thank you anyway

Logged
Pages: [1]   Go Up
« previous next »
 

Related Topics


SimplePortal © 2008-2014, SimplePortal