Chimp can't find the card in the camera, and Stick says it is waiting for permission to analyze the USB.
Last time was format, copy the CHDK files over to the card, and let the camera boot from the card that is write protected.
Not sure if you meant it that way, but stick and chimp require the card in a card reader, not the camera.
f your card is formatted FAT32, you should be able just copy the files with a card reader, load CHDK with the "firmware update" method and make the card bootable from there.
Card is in the reader ... Chimp gives me "unsupported model" listing the firmware as 1.00 rev. 5.
Stick has no problem in identifying the camera and finding the CHDK version ... 100E ... goes as far as wanting to analyze the card and stops saying it needs permission before it can go any further ... card is not locked.
That is what I did the last time and hoped to do again. I have enough utilities for things like formatting FAT32. The card is 128 Gb, formatted FAT32, and works fine in this camera and a Finepix for which I wish there was a CHDK equivalent .
SX730 100e is in the autobuild, so I'm not sure why chimp says that.
I don't use stick, but that sounds like a need to run as admin type issue.
I'm not clear what part is not working then? Are you not able to load CHDK with the "firm update" option, or does the "make bootable" option not work after doing that?FWIW, you should also be able to use EOSCard to make bootable, by clicking the CHDK icon
Loading as firm update, I assume you mean the camera booting?
No, I mean starting CHDK manually using the Firmware update method.
QuoteNo, I mean starting CHDK manually using the Firmware update method.I knew that was the right question to ask. I never found a firmware update in the camera's menus and the Canon sight has no downloadable firmware updates.
Attached is a pic from the camera itself. This is why I wanted more control
Started by classicalgeek
« 1 2 »
Hello, I'm a NEWBIE - HELP!! (Newbies assistance, User Guides and thank you notes)
Started by blackpoll
General Discussion and Assistance
Started by nedhorning
General Help and Assistance on using CHDK stable releases
Started by TimPeTwo
« 1 2 ... 5 6 »
Started by MaximusNYC