CHDKPTP not working, only results in "Operation not supported" - General Discussion and Assistance - CHDK Forum
« previous next »
Pages: [1]   Go Down

CHDKPTP not working, only results in "Operation not supported"

  • 6 Replies
  • 3647 Views
*

Offline Little9070

  • *
  • 31
CHDKPTP not working, only results in "Operation not supported"
« on: 31 / August / 2022, 13:22:18 »
Advertisements
I tried using CHDKPTP to view my SD card without inserting and re-inserting over and over, and none of it works. I installed the driver multiple times using Zadig, I restarted the camera, inserted the cable multiple times and nothing works, it just errors out. This is what I get when I try and do anything.

update_mode_list failed Operation Not Supported
WARNING: camera live view protocol not supported by this client, live view disabled>
ERROR: Operation Not Supported
ERROR: Operation Not Supported
ERROR: Operation Not Supported
ERROR: Operation Not Supported

and it connects to "bus-0:\\.\libusb0-0002--0x04a9-0x32ad"

If there is anymore info I can send please let me know
Logged
Sent from my Canon PowerShot SX410 IS
*

Offline reyalp

  • ******
  • 14140
Re: CHDKPTP not working, only results in "Operation not supported"
« Reply #1 on: 31 / August / 2022, 22:47:14 »
Quote from: Little9070 on 31 / August / 2022, 13:22:18
I tried using CHDKPTP to view my SD card without inserting and re-inserting over and over, and none of it works. I installed the driver multiple times using Zadig, I restarted the camera, inserted the cable multiple times and nothing works, it just errors out. This is what I get when I try and do anything.

update_mode_list failed Operation Not Supported
Are you sure CHDK is running on your camera? Also, what camera, and what version of CHDK?

Quote
and it connects to "bus-0:\\.\libusb0-0002--0x04a9-0x32ad"
If you see this, then the driver is almost certainly installed correctly.
Logged
Don't forget what the H stands for.
*

Offline Little9070

  • *
  • 31
Re: CHDKPTP not working, only results in "Operation not supported"
« Reply #2 on: 01 / September / 2022, 16:16:21 »
Okay, now I have another strange issue, the zip I downloaded for CHDK says sx410is-100b-1.5.1-6085-full.zip but in the CHDK build info it says 100c?

Canon Powershot SX410 IS
Logged
Sent from my Canon PowerShot SX410 IS
*

Offline philmoz

  • *****
  • 3450
    • Photos
Re: CHDKPTP not working, only results in "Operation not supported"
« Reply #3 on: 01 / September / 2022, 18:08:25 »
Quote from: Little9070 on 01 / September / 2022, 16:16:21
Okay, now I have another strange issue, the zip I downloaded for CHDK says sx410is-100b-1.5.1-6085-full.zip but in the CHDK build info it says 100c?

Canon Powershot SX410 IS


Nothing to worry about.
The 1.00b and 1.00c firmware versions are equivalent as far as CHDK is concerned so we only build one version (1.00c) and copy it for the auto build download server.

Logged
CHDK ports:
  sx30is (1.00c, 1.00h, 1.00l, 1.00n & 1.00p)
  g12 (1.00c, 1.00e, 1.00f & 1.00g)
  sx130is (1.01d & 1.01f)
  ixus310hs (1.00a & 1.01a)
  sx40hs (1.00d, 1.00g & 1.00i)
  g1x (1.00e, 1.00f & 1.00g)
  g5x (1.00c, 1.01a, 1.01b)
  g7x2 (1.01a, 1.01b, 1.10b)
*

Offline Little9070

  • *
  • 31
Re: CHDKPTP not working, only results in "Operation not supported"
« Reply #4 on: 01 / September / 2022, 21:57:54 »
Oh, alright thanks.
Logged
Sent from my Canon PowerShot SX410 IS
*

Offline Little9070

  • *
  • 31
Re: CHDKPTP not working, only results in "Operation not supported"
« Reply #5 on: 01 / September / 2022, 22:10:37 »
Uh, I figured out the issue, it turns out you have to connect your camera, then start CHDKPTP, not the other way around. Thank you for the help anyway though, I appreciate it.
Logged
Sent from my Canon PowerShot SX410 IS
*

Offline reyalp

  • ******
  • 14140
Re: CHDKPTP not working, only results in "Operation not supported"
« Reply #6 on: 01 / September / 2022, 22:43:29 »
Quote from: Little9070 on 01 / September / 2022, 22:10:37
Uh, I figured out the issue, it turns out you have to connect your camera, then start CHDKPTP, not the other way around. Thank you for the help anyway though, I appreciate it.
Glad to hear you got it working, but FWIW, connecting the camera after starting chdkptp should work fine. It does for me on Windows 10 (and linux and Mac)
Logged
Don't forget what the H stands for.
Pages: [1]   Go Up
« previous next »
 

Related Topics


SimplePortal © 2008-2014, SimplePortal