Is delay=2*exposure normal?

temp

2

« on: 21 / June / 2008, 07:18:29 »

Advertisements

Hi all!

Probably a dumb question, but I'm a newbie and the search seems to be out of order, so please be gentle.

I have a Canon A650, and have tried AllBest builds 50 and 51. With both of these builds, when I take a picture in Tv/M mode, there is an added delay equivalent to the exposure time when the camera only says "Busy." (For example, when I use a 10 second exposure, I wait 10 seconds while the picture gets taken (display is blank), but then I need to wait for ANOTHER 10 secs while the screen only says "Busy.") This doesn't happen without CHDK, so it must be related... My question is, is this added delay what you would call "normal", that is, a necessary consequence of using CHDK, or am I doing something wrong?

Thanks for your time,
-temp

Logged

fe50

3152
IXUS50 & 860, SX10 Star WARs-Star RAWs

Re: Is delay=2*exposure normal?

« Reply #1 on: 21 / June / 2008, 07:36:48 »

Hello & welcome temp,

not a dumb question...

I think this delay is the Dark-frame-subtraction (for noise reduction on exposures > 1s), you can handle it in the CHDK "Raw parameters menu", it is NOT only for RAW, it's also for JPEG.

Have a look to the description in the Wikia: CHDK_firmware_usage#RAW_parameters_menu

Logged

-->FIRMWARE DUMPS<-- * Manual * Lua * me

acseven

663

Re: Is delay=2*exposure normal?

« Reply #2 on: 21 / June / 2008, 08:39:19 »

Quote from: temp on 21 / June / 2008, 07:18:29

Hi all!

Probably a dumb question, but I'm a newbie and the search seems to be out of order, so please be gentle.

Hi, questions aren't usually dumb, especially if made in the right place (this is the case).

Search is out of order? how's that?

Logged

CHDK? Help me, I'm a newbie! | Learn all about CHDK at wikia! | 500px | Flickr

temp

2

Re: Is delay=2*exposure normal?

« Reply #3 on: 21 / June / 2008, 09:34:28 »

Quote from: fe50 on 21 / June / 2008, 07:36:48

I think this delay is the Dark-frame-subtraction (for noise reduction on exposures > 1s), you can handle it in the CHDK "Raw parameters menu", it is NOT only for RAW, it's also for JPEG.

Hi! Yes, that was it =) Thank you very much, and of course big thanks to ALL people who have contributed in the development of this great piece of software!

Edit: First thought that the extra delay might be some kind of hardware limitation that had to be accepted in order to get all that flexibility, but I guess in case of CHDK one should "never attribute to malfunction things which can be explained by something fancy", heh =)

« Last Edit: 21 / June / 2008, 09:55:57 by temp »

Logged