supplierdeeply

Canon IXUS 900 Ti / Powershot SD900 1.00C Port

  • 262 Replies
  • 69193 Views
*

Offline pixeldoc2000

  • ****
  • 356
  • IXUS900Ti 1.00C, IXUS300HS 1.00D
    • pixel::doc homebase
Re: Canon IXUS 900 Ti / Powershot SD900 1.00C Port
« Reply #250 on: 24 / October / 2010, 18:08:21 »
Advertisements
boom
Thanx!

This means current source has been added to official CHDK trunk #959 and current build is available from http://chdk.wikia.com/wiki/Downloads .

I've tested autobuild binary. Looking good!
But Autobuild does compile with gcc 4.4.3, i always used 3.4.6.
I hope gcc 4.4.3 doesn't break anything...
« Last Edit: 24 / October / 2010, 18:22:26 by pixeldoc2000 »

Re: Canon IXUS 900 Ti / Powershot SD900 1.00C Port
« Reply #251 on: 02 / November / 2010, 19:14:28 »
Downloaded autobuild today loaded OK, will start shooting soon
It is better to burn a roll of film than curse the darkness Equip, S100 w/CHDK, SD900 w/CHDK, SD990 w/CHDK & Pentax K2000, Pentax Kr
Flickr:

Re: Canon IXUS 900 Ti / Powershot SD900 1.00C Port
« Reply #252 on: 07 / November / 2010, 15:53:54 »
Things still working well no issues,  with CHDK the SD900 is one of best digital cameras I have ever owned
It is better to burn a roll of film than curse the darkness Equip, S100 w/CHDK, SD900 w/CHDK, SD990 w/CHDK & Pentax K2000, Pentax Kr
Flickr:

*

Offline pixeldoc2000

  • ****
  • 356
  • IXUS900Ti 1.00C, IXUS300HS 1.00D
    • pixel::doc homebase
Re: Canon IXUS 900 Ti / Powershot SD900 1.00C Port
« Reply #253 on: 11 / November / 2010, 16:11:43 »
Things still working well no issues,  with CHDK the SD900 is one of best digital cameras I have ever owned
Thanks for your feedback.
I also didn't encountered any issus yet.

The only known issus left is badpixel script does finish (to enable DNG). Donnu how to fix it. Maybe there are still wrong addresses or propset.


*

Offline nafraf

  • *****
  • 1293
Re: Canon IXUS 900 Ti / Powershot SD900 1.00C Port
« Reply #254 on: 07 / June / 2015, 22:15:55 »
- Incomplete UI Overlay in CHDKPTP as in attached screen shot
Patch in attachment, please test and report.

*

Offline koshy

  • *****
  • 686
Re: Canon IXUS 900 Ti / Powershot SD900 1.00C Port
« Reply #255 on: 08 / June / 2015, 20:01:57 »
- Incomplete UI Overlay in CHDKPTP as in attached screen shot
Patch in attachment, please test and report.
Thank you. Compiled it and tested.

- Still no button operation in CHDKPTP (No SET, UP, DOWN etc.)
- Still trouble with the UI overlay. I can only use the cam itself to control things and the overlay doesn't always follow along.

When I attempt to use the buttons in CHDKPTP I sometimes see UI overlay with ALT and "No Script" at the bottom. Vigorously using the buttons produces "ERROR: a script is already running" in CHDKPTP.

*

Offline hwntw

  • ***
  • 151
Canon IXUS 900 Ti / Powershot SD900 1.00C Port
« Reply #256 on: 01 / September / 2017, 10:30:54 »
Documentation relating to my Ixus 900 Ti states that the lens zoom range is (35mm equivalent): 37-111mm. When I use my Ixus 900 Ti the zoom displayed on screen says 22mm at the wide end and 70mm at the telephoto end (35mm equiv). Imprinted on the lens is 7.7-23.1mm zoom range. The sensor size is 1/1.8" apparently. Can other users confirm the EFL zoom display on their Ixus 900 Ti?
The onscreen display in mm starts at 4.6mm and goes up to 14.6mm

CHDK version 1.5, build 4903
« Last Edit: 01 / September / 2017, 10:45:36 by hwntw »
Ixus 300HS S100


Windows 10

*

Offline hwntw

  • ***
  • 151
Re: Canon IXUS 900 Ti / Powershot SD900 1.00C Port
« Reply #257 on: 06 / September / 2017, 15:55:59 »
Documentation relating to my Ixus 900 Ti states that the lens zoom range is (35mm equivalent): 37-111mm. When I use my Ixus 900 Ti the zoom displayed on screen says 22mm at the wide end and 70mm at the telephoto end (35mm equiv). Imprinted on the lens is 7.7-23.1mm zoom range. The sensor size is 1/1.8" apparently. Can other users confirm the EFL zoom display on their Ixus 900 Ti?
The onscreen display in mm starts at 4.6mm and goes up to 14.6mm

CHDK version 1.5, build 4903
Anybody else got an Ixus 900 Ti?
Ixus 300HS S100


Windows 10


*

Online reyalp

  • ******
  • 10863
Re: Canon IXUS 900 Ti / Powershot SD900 1.00C Port
« Reply #258 on: 07 / September / 2017, 00:08:48 »
Documentation relating to my Ixus 900 Ti states that the lens zoom range is (35mm equivalent): 37-111mm. When I use my Ixus 900 Ti the zoom displayed on screen says 22mm at the wide end and 70mm at the telephoto end (35mm equiv).
It seems the conversion isn't set up correctly in this port. To fix this, we need to know the number of zoom steps, and the real (not 35mm equiv) zoom at each step.

I think an old camera like this will only have a few steps, if it has more than 10 don't bother trying to list them all, we'll need a different approach.

You can get the real FL value by shooting and looking at the exif. (edit: I said to use misc value before, but those values are wrong)
Don't forget what the H stands for.

*

Offline hwntw

  • ***
  • 151
Re: Canon IXUS 900 Ti / Powershot SD900 1.00C Port
« Reply #259 on: 07 / September / 2017, 09:11:39 »
Hello
From the exif I can see the following zoom numbers, in mm:

zoom numbers for Canon Ixus 900 Ti
In steps:

7.7mm
9.0mm
10.5mm
12.5mm
15.6mm
18.8mm
23.1mm



Ixus 300HS S100


Windows 10

 

Related Topics