Ixus 40 / SD300 v1.00k - beta version available :) - page 10 - General Discussion and Assistance

37Millionen

4

Re: Ixus 40 / SD300 v1.00k - beta version available :)

« Reply #90 on: 02 / March / 2009, 10:37:51 »

Advertisements

Quote from: ewavr on 01 / March / 2009, 01:28:27

In CHDK bugtracker DNG support for ixus40 was requested, but bugtracker is down now.
Can somebody, who have this camera:
- install build #715 or later
- shoot RAW and upload RAW-JPEG pair somewhere (good focused and good exposed)?

Hi ewavr, I've tried my best in this weather ... Here are the results:
http://www.zshare.net/download/564084991ae8a1f1/
Hope that helps?
Thanks a million!

Logged

ewavr

1057
A710IS

Re: Ixus 40 / SD300 v1.00k - beta version available :)

« Reply #91 on: 02 / March / 2009, 13:08:21 »

Thanks, DNG support is added for ixus40 in #716 (all DNG setting are copied from latest DNG4PS2).

note: due to strange file capt_seq.c for this camera, creation time in DNG EXIF may differ from JPEG EXIF (for >1s exposures).

Logged

37Millionen

4

Re: Ixus 40 / SD300 v1.00k - beta version available :)

« Reply #92 on: 02 / March / 2009, 17:24:19 »

Quote from: ewavr on 02 / March / 2009, 13:08:21

Thanks, DNG support is added for ixus40 in #716 (all DNG setting are copied from latest DNG4PS2).

wow, that was quick! Thanks a lot! However ... it seems I cannot open my new DNG files in Adobe Camera Raw (CS4). Could that be possible? Anybody else with the same difficulties?

If I use DNG4PS2 instead, everything's fine (but that doesn't exist for my mac, or at least, there is no version that converts ixus 40 images yet ... damn complicated)

Logged

37Millionen

4

Re: Ixus 40 / SD300 v1.00k - beta version available :)

« Reply #93 on: 02 / March / 2009, 17:34:09 »

Logged

fe50

3152
IXUS50 & 860, SX10 Star WARs-Star RAWs

Re: Ixus 40 / SD300 v1.00k - beta version available :)

« Reply #94 on: 02 / March / 2009, 18:01:34 »

Tested the DNG with PS3 & PS4 (Windows version): EOF error on both.
Paint.NET, XNView & Google Picasa opens the DNG without any messages...

UFRaw 0.15 gives an "unexpected end of file" error, too - but then it shows the image, here's the UFRaw log:

ufraw_open: w:2344 h:1752 curvesize:0 EXIF data read using exiv2, buflen 844 Warning: Directory SubImage1, entry 0x0111: Strip 0 is outside of the data area; ignored. Loading Canon image from C:\Dokumente und Einstellungen\xxxxxxxx\Desktop\Downloads\DNG\CRW_0007.DNG ... Black: 31, Maximum: 1023 C:\Dokumente und Einstellungen\xxxxxxxx\Desktop\Downloads\DNG\CRW_0007.DNG: Unexpected end of file Scaling with black 31, multipliers 0,315392 0,330489 1,000000 0,328192

Logged

-->FIRMWARE DUMPS<-- * Manual * Lua * me

ewavr

1057
A710IS

Re: Ixus 40 / SD300 v1.00k - beta version available :)

« Reply #95 on: 02 / March / 2009, 18:09:18 »

Quote from: 37Millionen on 02 / March / 2009, 17:24:19

However ... it seems I cannot open my new DNG files in Adobe Camera Raw (CS4). Could that be possible?

Oops! DNG file is too short. ~~Must be fixed in #717~~.
Hmm, I see that camera name is not present in DNG file. But I cannot fix it without camera. Strange camera, strange CHDK port for it.

edit: Maybe best tool for DNG validating is Adobe dng_validate (for Mac & Win, with sources) - part of Adobe SDK.

edit2: DAMN! Final fix - in #718.

« Last Edit: 02 / March / 2009, 18:25:02 by ewavr »

Logged

37Millionen

4

Re: Ixus 40 / SD300 v1.00k - beta version available :)

« Reply #96 on: 04 / March / 2009, 17:02:53 »

ewavr, you rock! Now this works! Thank you sooooooooo much!

Logged

EforeZZ

4

Re: Ixus 40 / SD300 v1.00k - beta version available :)

« Reply #97 on: 09 / June / 2009, 08:09:39 »

I have ixus40_sd300-100k-0.9.8-766-full and I'm unable to save photo in RAW (The blue led blinks but I get only JPG, no RAW

).

And another RAW problem.. I tried to enable the DNG RAW mode and it asked to run the badpixel.lua script to generate the badpixel.bin file.

The script displays "Please wait, do not panic...". I waited for a minute or two and turned off the camera. No badpixel.bin file was generated.

Does anyone have problems with this firmware version too?

Can anyone please post the 718 version for the K firmware here? (Cannot find it with Google..)

« Last Edit: 09 / June / 2009, 08:25:58 by EforeZZ »

Logged

fe50

3152
IXUS50 & 860, SX10 Star WARs-Star RAWs

Re: Ixus 40 / SD300 v1.00k - beta version available :)

« Reply #98 on: 09 / June / 2009, 08:28:01 »

Quote from: EforeZZ on 09 / June / 2009, 08:09:39

I have ixus40_sd300-100k-0.9.8-766-full and I'm unable to save photo in RAW (The blue led blinks but I get only JPG, no RAW ).

Use a card reader; check all folders on your SD card, dependent from your CHDK settings the RAW files are stored in a different folder as the JPGs (e.g. 100CANON or 000CANON); it's adjustable in the CHDK RAW menu, menu item "RAW File in Dir with JPEG".

Quote

And another RAW problem.. I tried to enable the DNG RAW mode and it asked to run the badpixel.lua script to generate the badpixel.bin file.
The script displays "Please wait, do not panic...". I waited for a minute or two and turned off the camera. No badpixel.bin file was generated.
Does anyone have problems with this firmware version too?

Have a look to this post:

Quote from: fe50 on 09 / June / 2009, 06:52:48

Quote from: nemesis on 09 / June / 2009, 04:06:33
I'm trying to enable the DNG format on my Ixus 40 (SD300) v1.00k, but it keeps throwing my the error:
...
I've run the badpixel.lua script three times now, and confirmed that a badpixel.bin file actually does exist in the CHDK folder. The script reports 0 bad pixels; and the resultant badpixel.bin file is 0 bytes long.
Trawling the forums and google doesn't reveal any solutions other than running the script -- which I've done...
If you're running a Windows system you can create the badpixel.bin file manually with ewavr's show_bad_b.exe: CHDK wikia: Badpixel_removal.

Since the show_bad_b zip package includes the C source code, you should also be able to compile it on other operating systems like Mac OS, e.g. with the GCC...

Logged

-->FIRMWARE DUMPS<-- * Manual * Lua * me

EforeZZ

4

Re: Ixus 40 / SD300 v1.00k - beta version available :)

« Reply #99 on: 09 / June / 2009, 09:16:52 »

The CRW problem:

Quote from: fe50 on 09 / June / 2009, 08:28:01

Use a card reader; check all folders on your SD card, dependent from your CHDK settings the RAW files are stored in a different folder as the JPGs (e.g. 100CANON or 000CANON);

Used a card reader to check the filesystem on the card and to search for *.CRW. Found nothing.

Quote from: fe50 on 09 / June / 2009, 08:28:01

it's adjustable in the CHDK RAW menu, menu item "RAW File in Dir with JPEG".

Tried toggling this option. No effect.

And the DNG problem:

Quote from: fe50 on 09 / June / 2009, 06:52:48

Quote from: nemesis on 09 / June / 2009, 04:06:33
I'm trying to enable the DNG format on my Ixus 40 (SD300) v1.00k, but it keeps throwing my the error:
...
I've run the badpixel.lua script three times now, and confirmed that a badpixel.bin file actually does exist in the CHDK folder. The script reports 0 bad pixels; and the resultant badpixel.bin file is 0 bytes long.
Trawling the forums and google doesn't reveal any solutions other than running the script -- which I've done...
If you're running a Windows system you can create the badpixel.bin file manually with ewavr's show_bad_b.exe: CHDK wikia: Badpixel_removal.

Since the show_bad_b zip package includes the C source code, you should also be able to compile it on other operating systems like Mac OS, e.g. with the GCC...

I used the show_bad_b and it showed 0 bad pixels on all my CRW files and created the 0-bytes long badpixel.bin.
I created the 0-bytes long badpixel.bin file in CHDK directory. Now it says it cannot load the "CHDK/badpixel.bin" file while the file itself exists.

« Last Edit: 09 / June / 2009, 12:22:19 by EforeZZ »

Logged