SD1100/ixus 80 porting .... - page 26 - DryOS Development - CHDK Forum

SD1100/ixus 80 porting ....

  • 360 Replies
  • 196354 Views
Re: SD1100/ixus 80 porting ....
« Reply #250 on: 19 / November / 2008, 17:39:08 »
Advertisements
The actual builds aren't workin for me. Camera freezes after a few seconds.
My firmware is 101a.  Formatting, making bootable and data transfer done with CardTricks 1.41.
SD Card was locked afterwards.
Happens with ixus80_sd1100-101a-0.8.0-580-full.zip and ixus80_sd1100-101a-0.8.1-585-full.zip.

Are there some older builds available somewhere for testing?

Best regards,
-vh


EDIT:

It is working ith the older version described here
SD1100/ixus 80 porting ....
« Last Edit: 19 / November / 2008, 18:14:40 by Vollhorst »

*

Offline chr

  • ***
  • 138
  • IXUS 82 IS
Re: SD1100/ixus 80 porting ....
« Reply #251 on: 19 / November / 2008, 18:56:49 »
The actual builds aren't workin for me. Camera freezes after a few seconds.
My firmware is 101a.  Formatting, making bootable and data transfer done with CardTricks 1.41.
SD Card was locked afterwards.
Happens with ixus80_sd1100-101a-0.8.0-580-full.zip and ixus80_sd1100-101a-0.8.1-585-full.zip.

Question:
* does it work in PLAY mode and it crashes in REC mode only?
* did you play with the edge feature? (this is very buggy and cam runs out of memory)

Can you do this: let the cam crash (with version 585). Then start the cam with the "older" build from SD1100/ixus 80 porting ....
goto misc/debug menu and save the ROMLOG.txt and upload it here.
« Last Edit: 19 / November / 2008, 19:51:59 by chr »

Re: SD1100/ixus 80 porting ....
« Reply #252 on: 19 / November / 2008, 20:25:48 »
* does it work in PLAY mode and it crashes in REC mode only?

No, mode does not matter. Camera crashes in each possible mode.

* did you play with the edge feature? (this is very buggy and cam runs out of memory)

No, I dont even know what that is.

Can you do this: let the cam crash (with version 585). Then start the cam with the "older" build from SD1100/ixus 80 porting ....
goto misc/debug menu and save the ROMLOG.txt and upload it here.

I have repeated the whole procedure: Formatting, Installed 585 -> crash, replaced DISKBOOT.BIN with the corresponding Firmware 101a file from the older Version.
Then CHDK started. Unfortunately I was unable to save the ROMLOG. Saving the ROMLOG greyed out the screen, only the battery status was visible. I turned off the camera after several minutes, since saving a log file can not last so long. On the SD there was afterwards an RomLogErr.txt file with the entry "Log is not Saved." anyway.


Best Regards,
-vh

*

Offline chr

  • ***
  • 138
  • IXUS 82 IS
Re: SD1100/ixus 80 porting ....
« Reply #253 on: 20 / November / 2008, 03:50:36 »
I have repeated the whole procedure: Formatting, Installed 585 -> crash, replaced DISKBOOT.BIN with the corresponding Firmware 101a file from the older Version.
Then CHDK started. Unfortunately I was unable to save the ROMLOG. Saving the ROMLOG greyed out the screen, only the battery status was visible.
It opens the ROMLOG.txt in textreader ... but if there is none ... the grey is the empty text reader.

Is there a crash.log on the card?


Re: SD1100/ixus 80 porting ....
« Reply #254 on: 20 / November / 2008, 04:05:42 »
Is there a crash.log on the card?


No, it is not. Only the "empty" RomLogErr.txt.


Is there anybody else with similar problems?

Best regards,
-vh

Re: SD1100/ixus 80 porting ....
« Reply #255 on: 20 / November / 2008, 04:19:57 »
I have the same problem with my SD1100.
Firmware Ver GM1.01A
Jan 24 2008
Using 2GB SanDisk formatted with CardTricks v1.41

Camera powers on and freezes after few seconds after the LED blinks blue.

I am pretty sure I am doing everything correctly. I successfully installed CHDK on Canon S3 earlier today.

Please help! Something is broken... Much appreciated.

*

Offline lyekka3000

  • *
  • 4
  • digital ixus 80 is
    • MySpace
Re: SD1100/ixus 80 porting ....
« Reply #256 on: 20 / November / 2008, 06:40:27 »
me too :( ... i have a "digital ixus 80 is" firmware v 1.01a and the blue light blinks once then the camera freezes
also, avg says CardTricks v1.41 has a worm virus :blink:

*

Offline whim

  • ******
  • 2046
  • A495/590/620/630 ixus70/115/220/230/300/870 S95
Re: SD1100/ixus 80 porting ....
« Reply #257 on: 20 / November / 2008, 06:47:48 »
me too :( ... i have a "digital ixus 80 is" firmware v 1.01a and the blue light blinks once then the camera freezes
also, avg says CardTricks v1.41 has a worm virus :blink:


about CT 141, check this post: A590IS porting...

wim
« Last Edit: 20 / November / 2008, 06:49:34 by whim »

*

Offline lyekka3000

  • *
  • 4
  • digital ixus 80 is
    • MySpace
Re: SD1100/ixus 80 porting ....
« Reply #258 on: 20 / November / 2008, 07:10:13 »
thanks whim :)
i downloaded cardtricks140.exe from drop.io which seems clean ... i guess it's just a false positive by avg ???

looking forward to using chdk soon :D

Re: SD1100/ixus 80 porting ....
« Reply #259 on: 20 / November / 2008, 09:38:05 »
I'm having the same problem.  Loaded the latest CHDK version for 1.01a I could find.  Won't load the CHDK menu.  Just parts of the cameras built in menu work.


  Tried the other versions too, worst problems.  couldn't get the camera to funciton much at all.  I will keep cheking for updates.

Thanks to all the developers.  Keep up the great work!

Where is a good string to read about how to wire the USB for remote shutter operation?  Need it for my KAP.
« Last Edit: 20 / November / 2008, 14:54:59 by VAKAPER »

 

Related Topics


SimplePortal © 2008-2014, SimplePortal