SD1100/ixus 80 porting .... - page 28 - DryOS Development - CHDK Forum supplierdeeply

SD1100/ixus 80 porting ....

  • 360 Replies
  • 156683 Views
*

Offline Hacki

  • ****
  • 358
  • SX100
Re: SD1100/ixus 80 porting ....
« Reply #270 on: 23 / November / 2008, 17:30:01 »
Advertisements
Just switched back to gcc4 again, now built with CFLAGS+=-mtune=arm946e-s

Check if it works.


Re: SD1100/ixus 80 porting ....
« Reply #271 on: 23 / November / 2008, 18:28:54 »
The actual builds aren't workin for me. Camera freezes after a few seconds.
My firmware is 101a.  Formatting, making bootable and data transfer done with CardTricks 1.41.
SD Card was locked afterwards.
Happens with ixus80_sd1100-101a-0.8.0-580-full.zip and ixus80_sd1100-101a-0.8.1-585-full.zip.



ixus80_sd1100-100c-0.8.1-588-full.zip  works for me. I have FW GM 1.00C

Re: SD1100/ixus 80 porting ....
« Reply #272 on: 23 / November / 2008, 19:43:59 »
Just switched back to gcc4 again, now built with CFLAGS+=-mtune=arm946e-s

Check if it works.




Just tried build 588. Unfortunately there is no difference, Camera crashes during startup. (FW :1.01A)

I've compiled a few older Revisions myself with the Windows GCC-GUI, but none of them worked for me.
I tested all revisions back to 578 without success.

The only Version I got to work until now is 572 from this thread.

Thank you for all your efforts,
-vh

Re: SD1100/ixus 80 porting ....
« Reply #273 on: 23 / November / 2008, 19:52:57 »
Here is a build from my win/GCC3 env. I'd be interested to know if it works.

Could you also post a version for the 1.01A Firmware?

Thank you.


*

Offline reyalp

  • ******
  • 13500
Re: SD1100/ixus 80 porting ....
« Reply #274 on: 23 / November / 2008, 19:54:32 »
@amrishkelkar is that my build, or the autobuild that works ?

@Vollhorst, attached
Don't forget what the H stands for.

Re: SD1100/ixus 80 porting ....
« Reply #275 on: 23 / November / 2008, 20:09:28 »
Hacki,
Tried that version on my 1.01a cam.  Not working any better.  Can't get the menu to come up.  Light blinks blue once while screen says "no image"  (no pictures taken).  This message on black screen disappears after about 20 seconds and camera shuts down.  I can't get to any menus.    Am I correct to push the "Print"  (Alt?) button after the blue light blinks, and then push "Menu"?

Re: SD1100/ixus 80 porting ....
« Reply #276 on: 23 / November / 2008, 20:12:04 »
@amrishkelkar is that my build, or the autobuild that works ?

@Vollhorst, attached

Thank you, but still no success. Still the same behaviour, freezing during startup.
I used two different SD-Cards, each of them freshly formatted etc.

The error seems to appear somewhere between Rev 572 and 578, since 572 works for me, 578 does not.


*

Offline reyalp

  • ******
  • 13500
Re: SD1100/ixus 80 porting ....
« Reply #277 on: 23 / November / 2008, 20:21:00 »
OK, it looks like there's a problem specific to 101a, in addition to possible build environment related problems.
Don't forget what the H stands for.


*

Offline reyalp

  • ******
  • 13500
Re: SD1100/ixus 80 porting ....
« Reply #278 on: 23 / November / 2008, 20:58:44 »
My fault, I forgot to update a generated file in 101ab after I fixed 100c :(

Attached build should work, along with future autobuilds.
Don't forget what the H stands for.

*

Offline chr

  • ***
  • 138
  • IXUS 82 IS
Re: SD1100/ixus 80 porting ....
« Reply #279 on: 23 / November / 2008, 21:05:45 »
As I said ... I prefer solving problems with logic and not with try and error  8)

101a should work with rev589 from autobuild now.
« Last Edit: 23 / November / 2008, 21:07:40 by chr »

 

Related Topics