prolong you battery life on motion detection, time lapse etc. - General Help and Assistance on using CHDK stable releases - CHDK Forum supplierdeeply
« previous next »
Pages: [1]   Go Down

prolong you battery life on motion detection, time lapse etc.

  • 5 Replies
  • 8518 Views
*

Offline Gran Canaria

  • *
  • 24
  • S2 SX10 or SX1
prolong you battery life on motion detection, time lapse etc.
« on: 04 / August / 2008, 14:15:32 »
Advertisements
a little piece of a wooden kebab skewer makes your Canon S series last longer.

When you plug the Canon to a TV the screens go off and your picture is on the TV so you save battery power because the screens are off.
In motion detection, time lapse etc. you do not need the monitor but if you turn it off, so does the camera. If you trick the camera into thinking you are using an external screen to monitor, it will not turn off.
The S series has a special plug what has 4 connections (a stereo plug has 3) so if you use a stereoplug, you shorten one signal. I did it for a short time with no ill efect but I would not do that to the camera for a long time. So if you use a piece of a wooden kebab scewer (the slim ones not the big ones) your shooting will last much longer.



inspired by phyrephox
Logged
*

Offline cybercom

  • ****
  • 268
    • William Meredith's Photography Site - enjoy!!
Re: prolong you battery life on motion detection, time lapse etc.
« Reply #1 on: 04 / August / 2008, 23:31:47 »
Great idea, plus you get to eat the Kebab!! :D
Logged
~~~~~~~~~~~~~~~~~~~~~

<")%%%><<
*

Offline Gran Canaria

  • *
  • 24
  • S2 SX10 or SX1
Little Woody Part II
« Reply #2 on: 05 / August / 2008, 07:37:21 »
OK, I modified the switch.
If you want to look at the monitor again, where to put little woody?
he is 1" long or 2.5 cm

If you remove some wood to get a flat surface, the woody stays in without triggering the switch
If you color the flat and round side , you do not need to remember which side up to switch off the screen.


green monitor on position


red monitor off position


and here you have the place to put it on the camera if you dont need it...
« Last Edit: 05 / August / 2008, 07:56:14 by Gran Canaria »
Logged
*

Offline bbriand

  • *
  • 6
Re: prolong you battery life on motion detection, time lapse etc.
« Reply #3 on: 05 / August / 2008, 08:18:52 »
I have a mono 1/16" headphone jack tip.  Snaps in there perfect and shuts the lcd off.  The tip is from a power adapter that allows you to swap tips around.

Cheers,
Bill
Logged
*

Offline Jucifer

  • *****
  • 251
  • [A710IS]
Re: prolong you battery life on motion detection, time lapse etc.
« Reply #4 on: 05 / August / 2008, 08:34:58 »
Here's my take on the subject. :]
Had to trim the aglet a bit, used a knife and some high(er) grade sandpaper (600 grit? can't remember any more).

(the cam on my phone isn't very high grade)
Logged
*

Offline gtrecordings

  • *
  • 18
  • sd550
    • three-rings
Re: prolong you battery life on motion detection, time lapse etc.
« Reply #5 on: 11 / November / 2008, 06:29:43 »
i have a broken lcd, so i always have to use the tv out... i want to try to add

 af_led_off
 blue_led_off
 yellow_led_off
 green_led_off
 amber_led_off

to my scripts and see if that helps... I am getting about two hours of battery on time lapse scripts

Logged
Pages: [1]   Go Up
« previous next »
 

Related Topics