Hello,
I'm using the previous build (7 dec?) on an S2 IS and the fastest shutter time I could get is 1/3200. I've tried manual, P, Av, Tv, Auto, large aperture, small aperture, with and without flash, etc.
Now, I'm using the trick of half-release the shutter button and the LCD displays the picture exposed correctly (dimmed), but when the shot is taken it is still at 1/3200.
Another issue: I don't know how to use motion detection - I've run the scripts and once motion is triggered it keeps shooting pictures. If motion is not triggered then the display is set to off and I have to turn on the camera again. Perhaps I'm missing something here not written in the FAQ.
- camera is set auto-off at about 3 minutes
- display auto-off at about 10 seconds
- preview 2 secs
- full display information from original canon
- histogram on, battery status and clock, no zebra, focus information
When shooting automatically it seems to trigger again when the OSD appears (or CHDK appears).
I'm almost sure I'm doing something wrong since a lot of people have reported success with these.