Actually one other thing I noticed but didn't recheck... juciphox defaults to "save script params" = Off (Why?...this is different from trunk behavior). Well I checked this option and then fiddled with script parameters and turned off the camera. I didn't run the script. Then after booting the camera, my settings were reset to defaults. Only after setting the parameters for the second time they were saved.
actually the ability to save the params never was in trunk!? this feature was added in juciphox by cyril42e if i'm not mistaken. I then recently added the switch (it was always enabled before) and set it to default off, as people were having problems with it.
I ran this on Juciphox 488 (a570is 1.00e) last night and after about 298 frames and 3 hours it stopped to an error: "not enough memory PRESS SHUTTER TO CLOSE" (at least that's what the log says, the battery had exhausted by morning).I used parameters 34 15 1 8, others defaults.
I'm happy to say that this is fully repeatable behavior on my camera...
Quote from: fudgey on 21 / August / 2008, 15:27:47I'm happy to say that this is fully repeatable behavior on my camera... It ran ok all night (740 shots) in my test. A570 IS 1.01A build 491does anybody have the build 488 for a570 1.01 for me to test?Also, could you please test again with build 491?
Started by fudgey
Started by mattkime
« 1 2 3 4 5 »
Completed and Working Scripts
Started by tc531
Creative Uses of CHDK
Started by perspixe
« 1 2 »
Started by Multiades