Attempting to build CHDK under OS X - some success, some problems. - page 2 - General Discussion and Assistance

whim

2044
A495/590/620/630 ixus70/115/220/230/300/870 S95

Re: Attempting to build CHDK under OS X - some success, some problems.

« Reply #10 on: 29 / November / 2008, 12:30:58 »

Advertisements

Hi !

Quote

GCC_VERSION=$(shell $(CC) -dumpversion)
GCC_VERSION_MAJOR=$(firstword $(subst ., ,$(GCC_VERSION)))

# -msoft-float is used per default but object files are marked as hard-float
CFLAGS=-fno-inline -Os -fno-strict-aliasing
# flags for gcc v4
# CFLAGS+=-mcpu=arm946e-s
# for gcc v3, we use to allow use of strd etc
ifeq ($(GCC_VERSION_MAJOR),3)
CFLAGS+=-march=armv5te
else
ifeq ($(GCC_VERSION_MAJOR),4)
# TODO should be -mcpu, but breaks things ATM
CFLAGS+=-mtune=arm946e-s
endif
endif

I suppose it is in the above (quoted from makefile.inc); since a couple of versions
the settings are auto-adapted to the compiler version. My guess would be that
your early version 4 has problems with this flag on our current code ?

wim

PS also read this thread gcc. windows dev kit, binary size & the whole ordeal (discussion here) about the
GCC 3 / 4 troubles ...

Logged

*Wikia FAQ *GCC Compiler Shell for Windows

reyalp

13882

Re: Attempting to build CHDK under OS X - some success, some problems.

« Reply #11 on: 29 / November / 2008, 18:23:20 »

It depends on how your GCC 4 was built, per the thread whim linked. If you configure with:
../configure --target=arm-elf --prefix=~/arm-tools --enable-languages=c --disable-sanity-checks --disable-shared --disable-newlib --disable-libssp

(note, no CPU specified) it should (?) work.

Logged

Don't forget what the H stands for.

zeno

Re: Attempting to build CHDK under OS X - some success, some problems.

« Reply #12 on: 29 / November / 2008, 18:26:49 »

Thanks to both of you. I'll investigate and report back.

Logged

A570, S100, Ixus 127
Author of ASSIST, STICK, WASP, ACID, SDMInst, LICKS, WICKS, MacBoot, UBDB, CFGEdit

zeno

Re: Attempting to build CHDK under OS X - some success, some problems.

« Reply #13 on: 30 / November / 2008, 09:58:06 »

When I checked my gcc it says

Code: [Select]

dave-mitchells-imac:trunk509 dave$ arm-elf-gcc -v
Using built-in specs.
Target: arm-elf
Configured with: ./configure --target=arm-elf --prefix=/usr/local/arm --enable-interwork --enable-multilib
    --enable-languages=c,c++ --with-newlib --with-headers=../../src/newlib-1.14.0/newlib/libc/include
Thread model: single
gcc version 4.1.0

So it seems no cpu was specified anyway.

Logged

A570, S100, Ixus 127
Author of ASSIST, STICK, WASP, ACID, SDMInst, LICKS, WICKS, MacBoot, UBDB, CFGEdit

reyalp

13882

Re: Attempting to build CHDK under OS X - some success, some problems.

« Reply #14 on: 30 / November / 2008, 16:49:25 »

Interesting. One other difference is that you are using GCC 4.1.0, while the rest of us using gcc4 are on 4.3.x

You also don't need c++ or newlib support.

Another option would be to build GCC3 using the patch provided in the CHDK source.

Logged

Don't forget what the H stands for.

zeno

Re: Attempting to build CHDK under OS X - some success, some problems.

« Reply #15 on: 01 / December / 2008, 07:02:30 »

Many thanks reyalp. I just upgraded to 4.3.2 and everything now compiles!

My total lack of unix experience (after 25 years of PC DOS, OS/2 and Windows) meant it took me quite a time to upgrade. It turns out I needed to selfupgrade my macports first (it was downloading 4.1.0), deactivate the old arm-elf-gcc, install the latest version and then completely reset my PATH (which had lots of junk in it).

Logged

A570, S100, Ixus 127
Author of ASSIST, STICK, WASP, ACID, SDMInst, LICKS, WICKS, MacBoot, UBDB, CFGEdit