G9 porting progress - page 9 - DryOS Development - CHDK Forum  

G9 porting progress

  • 281 Replies
  • 111268 Views
*

Offline uvvv

  • *
  • 11
  • G9
Re: G9 porting progress
« Reply #80 on: 04 / October / 2008, 09:47:13 »
Advertisements
The ISO is still not right. Set to 400 calculates at 640....

It is correct.
You have set real ISO = 400 and the camera shows marketing value - 640...:)
so works CHDK...

CHDK can display real and marketing ISO in OSD...
There you will see these two values ISO...
« Last Edit: 04 / October / 2008, 09:49:32 by uvvv »

Re: G9 porting progress
« Reply #81 on: 04 / October / 2008, 10:51:31 »
Great! I got it to boot on my 1.00D ! I have been waiting for this for a while. The one problem I am seeing is that scripts aren't running properly. They all seem to go one step and then quit. Maybe this is something I am doing wrong though, as I am new to CHDK.

Thanks so much G9 coders!

Hi,

I did some tests with my G9 1.00D and I have the same problem: a script as simple as this one only takes one shot: /branches/grand/script/interval.bas - chdk - Trac . I added print commands to the script and it seems that the loop does continue but the "shoot" command works only the first time. I tried to replace it with click "shoot_full" but it doesn't work at all. This is weird because this one UBASIC/Scripts: Multipurpose Motion Detection - CHDK Wiki works well if I turn off the shot review: it does take more than one photo.

Also, a minor glitch: what CHDK writes (menus, etc.) sometimes disappears. It seems to be related to the face detection.

Anyway, thanks for all the efforts, it's great!!!

Guillaume

Re: G9 porting progress
« Reply #82 on: 05 / October / 2008, 07:57:32 »
Hi guys!

Thanks for your effort with CHDK for G9! You did a great job! 
After I registered in CHDK forum (silly me  :P  ) I was able to download 1.00D CHDK. Now it's familiarizing&testing time. 

Regards, Peter      :)

*

Offline qee

  • *
  • 2
Re: G9 porting progress
« Reply #83 on: 05 / October / 2008, 09:01:39 »
Hi all!

First - thanks to all the people participating in the development and testing process.

Is there a version for the "I" firmware yet? I thought - why build CHDK for all these different versions, when everyone can upgrade the firmware and then only one version is needed.


Re: G9 porting progress
« Reply #84 on: 05 / October / 2008, 10:39:10 »
Hi all!

First - thanks to all the people participating in the development and testing process.

Is there a version for the "I" firmware yet? I thought - why build CHDK for all these different versions, when everyone can upgrade the firmware and then only one version is needed.

That update is not officially supported by canon, so I'll wait untill the end of warranty to change the firmware.
But you can test it on your g9, if you like, and let us know how it works.
« Last Edit: 05 / October / 2008, 10:40:41 by bongo_bingo »

*

Offline qee

  • *
  • 2
Re: G9 porting progress
« Reply #85 on: 05 / October / 2008, 11:03:35 »
But you can test it on your g9, if you like, and let us know how it works.

It works just fine. Seems to contain all the languages etc., the only difference is "1.00I" displayed with ver(s).req. The upgrade takes about 20 seconds and doesn't reset any settings or so.

Re: G9 porting progress
« Reply #86 on: 05 / October / 2008, 11:24:33 »
Thanks for the info qee!

I'm not able to develop the g9's raw (I mean crw files) with any software (ufraw, taw therapee or raw hide) and sometimes  they crash.
I've been able to convert crw with dng4ps-2 using a650 profile, but the results weren't good.
Built in raw develop not always work and raw merge produce strange, unusefull grids.

Am I miss something?
« Last Edit: 05 / October / 2008, 11:47:09 by bongo_bingo »

Re: G9 porting progress
« Reply #87 on: 05 / October / 2008, 12:24:36 »
Hello,

i am a CHDK-Newbie and installed the Software for the 1.00 G Firmware.

But i have a problem with the focus at video-recording.

Is it possible to activate the auto-focus at recording videos?

The problem is, that the video is unsharpen, when i use the optical zoom.

Best Regards
Khaane :)

PS: Sorry for my bad english, i am writing from Germany :))


Re: G9 porting progress
« Reply #88 on: 05 / October / 2008, 16:11:35 »
« Last Edit: 06 / October / 2008, 07:35:36 by tcrew »

Re: G9 porting progress
« Reply #89 on: 06 / October / 2008, 19:37:22 »
Update:
Well, last build was done in a hury with wrong capt_seq.c. Please play with new attachment (script is working).

I've just tried it and it does work. This is great! Thanks a lot tcrew!

So, what's missing for this port to be in the "official" (and other no so official) build? I guess it's only "hijack movie-task" if I look at uvvv last update...

Guillaume

 

Related Topics