Not much luck here
Only thing that worked was the ver.req, I have a 1.01b, but the firmware dumper (couple versions including _2008) didn't, and the latest (I think?) 0.7.4 doesn't do anything, I'll try again next release.
As you are no doubt aware, it IS working for most folks.
[I also have a 1.01b and it works great, including with USB remote cable release.
]
Critical thinking suggests you have a newbie issue: Please visit the General Help section of the board for information and post your "getting started" questions there.
Well, a night's sleep made a difference, this site has so much information to absorb

This is my third visit to try learn about the project. This morning I got a firmware dump with my name in it! So that's working?
StartFile
0000000: 0000 0000 0000 0000 0000 0000 0000 0000 ................
Zeroes -> Start:
00b5a00: 0100 00ea 6761 6f6e 6973 6f79 5011 9fe5 ....gaonisoyP...
...
031f950: 0000 0000 0000 0000 4452 594f 5320 7665 ........DRYOS ve
031f960: 7273 696f 6e20 322e 332c 2072 656c 6561 rsion 2.3, relea
031f970: 7365 2023 3030 3233 0032 2e33 3900 0000 se #0023.2.39...
...
0495b10: 4361 6e6f 6e20 506f 7765 7253 686f 7420 Canon PowerShot
0495b20: 4135 3930 2049 5300 ffff ffff ffff ffff A590 IS.........
...
04b59f0: ffff ffff ffff ffff ffff ffff ffff ffff ................
End -> Zeroes
0fffff0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
EndFile
User data repeats many times near end of dump.
