SX100 IS

  • 276 Replies
  • 76074 Views
  • Publish
    Re: SX100 IS
    « Reply #250 on: 20 / August / 2008, 11:11:11 »
    Advertisements
    Hi,

    my Camera allways poweres up in Playback Mode.
    Is this a Bug?

    *

    Offline Hacki

    • ****
    • 353
    • SX100
  • Publish
    Re: SX100 IS
    « Reply #251 on: 20 / August / 2008, 11:31:55 »

  • Publish
    Re: SX100 IS
    « Reply #252 on: 29 / August / 2008, 02:35:36 »
    I was just wondering if liquid2000 or anybody else was working on getting 1.00b to work? As is not many features on the camera work when it's loaded (like adjusting shutter speed, aperture) and isn't really usable.  Trying to wait patiently.. thanks for all the work so far

  • Publish
    Re: SX100 IS
    « Reply #253 on: 29 / August / 2008, 03:22:52 »
    I was just wondering if liquid2000 or anybody else was working on getting 1.00b to work? As is not many features on the camera work when it's loaded (like adjusting shutter speed, aperture) and isn't really usable.  Trying to wait patiently.. thanks for all the work so far

    My SX100 1.00b works well, with all options. I don't understand why yours doesn't... Did you try last CHDK ? (zSHARE - sx100is_100b_484_beta.zip)


  • Publish
    Re: SX100 IS
    « Reply #254 on: 29 / August / 2008, 05:08:07 »
    I was just wondering if liquid2000 or anybody else was working on getting 1.00b to work? As is not many features on the camera work when it's loaded (like adjusting shutter speed, aperture) and isn't really usable.  Trying to wait patiently.. thanks for all the work so far

    Make sure you remove write protect of the SD card when you try to update newer CHDK version.

  • Publish
    Re: SX100 IS
    « Reply #255 on: 30 / August / 2008, 23:40:29 »
    Quote
    My SX100 1.00b works well, with all options. I don't understand why yours doesn't... Did you try last CHDK ? (zSHARE - sx100is_100b_484_beta.zip)
    oh sorry for missreporting that the 1.00b is really broken but for me it is.. I had everything working with 1.00c then my camera broke and got replaced with one running 1.00b and I've had problems with changing the values of shutter speed, aperture ever since. I've tried every 1.00b sx100is build i could find. Also I've formatted my memory card to make sure there weren't any settings left behind for 1.00c being loaded to 1.00b.

    I think Auto works fine but when I use AV i get this

    so the little arrows are there to indicate a value will be changed when i move the wheel but they are highlighting nothing changes when i hit +/- F2.8 highlights and I can modify that value, when i hit +/- again it goes back to highlighting the blank space. Without CHDK loaded and everything working properly it alternates between the aperture(f2.8 ) and exposure compensation(+/-0) options.

    Here's a screenshot of manual mode

    Here without CHDK +/- will switch between the shutter speed and aperture values however when I load any chdk for my camera it was highlighting aperture and i could change that value but when i hit +/- it brought up the exposure compensation menu and i could not modify that(this menu usually doesn't show in manual mode).
    After taking the screenshot i rebooted the camera with chdk and now no option is highlighted with the arrows and the wheel doesn't change anything.

    I know there's probably nothing anybody can tell me to help out I just figured it would be good to document this issue so that it would be known if others are experiencing it.

    Canon Powershot SX100 IS

    P-ID:315E NT D

    Firmware Ver GM1.00B

    NoError

    Jul 31 2007 19:07:47


    Adj Ver. 009.005
    IS Firm Ver. 2.30
    IS Param Ver. 2.20
    « Last Edit: 31 / August / 2008, 00:13:23 by inside0ut »

  • Publish
    Re: SX100 IS
    « Reply #256 on: 01 / September / 2008, 04:34:26 »
    OK. So does it go with mine too. It happens sometimes...

    Here is my solution : if mode is Av, I put it to AUTO (or VIDEO) mode, then back to Av again. And it works. Until the next boot...

  • Publish
    Re: SX100 IS
    « Reply #257 on: 05 / September / 2008, 02:10:31 »
    "......put it to AUTO (or VIDEO) mode, then back to Av again. And it works. Until the next boot..."

    it doesn't work to my camera!

    anyone could suggest other solution??

    (remark : allbest-sx100is-100b-51-500 could works but allbest-sx100is-100c-51-500 could not works in my camera.  It can't boot.  Only the blue light at direct print button continuously on.)


  • Publish
    Re: SX100 IS
    « Reply #258 on: 05 / September / 2008, 03:52:35 »
    Quote
    ... Did you try last CHDK ? (zSHARE - sx100is_100b_484_beta.zip)

    Tried! Same same.....the exposure compensation button doesn't work correctly!

    Same results as "insideOut".

  • Publish
    Re: SX100 IS
    « Reply #259 on: 08 / September / 2008, 07:26:34 »
    Same problems (insideOut, mtiger) with my SX100IS(B) too.
    Sometimes helps to switch back to PLAY mode and/or rotating MODE dial...

     

    Related Topics