the sx10 porting thread - page 52 - General Discussion and Assistance - CHDK Forum  

the sx10 porting thread

  • 613 Replies
  • 226993 Views
Re: the sx10 porting thread
« Reply #510 on: 11 / July / 2009, 13:16:19 »
Advertisements
Cormac, Reyalp, Achurch,

Guys, much thanks for working the 1.0.3a firmware version. Looking forward to the release.

Thanks again.

*

Offline reyalp

  • ******
  • 12374
Re: the sx10 porting thread
« Reply #511 on: 11 / July / 2009, 23:55:01 »
I've checked in the 103a stuff. Should be on the autobuilds shortly.
Don't forget what the H stands for.

Re: the sx10 porting thread
« Reply #512 on: 12 / July / 2009, 00:31:32 »
I haven't done a thorough test but 103a seems to boot fine. ISO, shutter speed, bracketing, RAW, and scripting seems to work. Thanks for this guys.

Re: the sx10 porting thread
« Reply #513 on: 13 / July / 2009, 06:17:30 »
I would like to thank all those who involved in the development of this program,
especially those who have such a great idea and came up with CHDK.

PS: Version 1.03a is fully working on my SX10.
Once again, Thanks


Re: the sx10 porting thread
« Reply #514 on: 13 / July / 2009, 10:22:42 »
i can't do to boot SDHk on my sx 10 is fw 1.03A.I tryed all methods....but nothing....same message......card locked....Any help?
2. It's possible to save on the SD only DNG format wirhout >JPEG format...because CHDK save in both formats and this is an invonvenience about disk space

Thanks to all developers for making this dream true.....CHDK

I have 2 cards SD
1. 8GB SDHC
2.32 GB sdhc
« Last Edit: 13 / July / 2009, 10:35:15 by nicupopescu »

*

Offline fe50

  • ******
  • 3110
  • IXUS50 & 860, SX10 Star WARs-Star RAWs
    • fe50
Re: the sx10 porting thread
« Reply #515 on: 13 / July / 2009, 12:59:09 »
i can't do to boot SDHk on my sx 10 is fw 1.03A.I tryed all methods....but nothing....same message......card locked....Any help?
Format your SD card in the camera, then unzip the "complete" package (DL it from the Autobuild server) to the card's root.
Start the camera in playback mode with the PLAY button [>] , press MENU, scroll down and select "Firmware Update" to start CHDK manually...
Quote
2. It's possible to save on the SD only DNG format wirhout >JPEG format...because CHDK save in both formats and this is an invonvenience about disk space
No, JPG's are always stored by the original firmware.
You can set up the smalles size & the highest compression from the Canon menu to save card space.

If you still have more question about using CHDK, please post it in the General Help and Assistance section here we are in the porting thread...

Re: the sx10 porting thread
« Reply #516 on: 14 / July / 2009, 13:14:55 »
The 1.03a version works beautifully! Thank you.

Re: the sx10 porting thread
« Reply #517 on: 17 / July / 2009, 21:14:38 »
My wife just bought a SX10 IS today. When I checked the version it was 1.03c. The 1.03a version booted up OK and the first few things I did worked, bracketing, showing zoom FL and temperature. The auto ISO when tied to FL seems OK but when tied to min. shutter speed it is funky. It must be said that this was in lower light conditions and I find the same thing happens to my G9 in low light, however the sx10 was worse. I suspect tommorow during the day when there is more light it will work better.  Its is in good day time light that I need the AUTOISO the most. My shtick is street photography and the AUTOISO just lets me forget all about shutter speed when shooting and that is huge.
As time goes on I will report more of my findings on the 1.03c version, althought I don't use chdk to anywhere near its full capacity. Looking forward checking out RAW on the sx10. To those who worked out the port for the sx10, a big THANKS.


*

Offline fe50

  • ******
  • 3110
  • IXUS50 & 860, SX10 Star WARs-Star RAWs
    • fe50
Re: the sx10 porting thread
« Reply #518 on: 18 / July / 2009, 08:41:50 »
When I checked the version it was 1.03c.
Could you pls. provide us a dump of your 1.03C fw ?

Re: the sx10 porting thread
« Reply #519 on: 18 / July / 2009, 20:50:27 »
Heres the link for the sx10is 1.03c dump

http://www.zshare.net/download/6285529847919831/

 

Related Topics