the sx10 porting thread - page 10 - General Discussion and Assistance - CHDK Forum supplierdeeply
« previous next »
Pages: 1 ... 5 6 7 8 9 [10] 11 12 13 14 15 ... 62   Go Down

the sx10 porting thread

  • 613 Replies
  • 294054 Views
*

Offline genzbenz

  • *
  • 2
Re: Is CHDK for SX10 possible in the future
« Reply #90 on: 15 / March / 2009, 20:50:14 »
Advertisements
Thank you to all who are working on this port.  My mouth is watering in anticipation of trying CHDK on my SX10IS.  With that said, I have firmware GM1.01B.  I attempted to get a firmware dump, but if I insert an SD card with the write protect tab set to "locked" the camera won't turn on.  Is there something that I'm missing?

Thanks!
Logged
*

Offline reyalp

  • ******
  • 13673
Re: Is CHDK for SX10 possible in the future
« Reply #91 on: 15 / March / 2009, 20:59:16 »
genzbenz: The camera isn't expected to boot fully with udumper so it may actually be working. In any case, we already have a 101B dump.

Logged
Don't forget what the H stands for.
*

Offline jsgarvin

  • *
  • 8
Re: Is CHDK for SX10 possible in the future
« Reply #92 on: 15 / March / 2009, 21:03:36 »
Whoohoo!  I was also trying to get the 1.01b dump, but I'm on Linux and although CardTricks seems to run fine under wine I was having trouble getting it to recognize the card. But, it looks like that won't be necessary afterall.  My mouth is watering for 1.01b. I'm especially looking forward to the longer exposure times.
« Last Edit: 15 / March / 2009, 21:13:48 by jsgarvin »
Logged
*

Offline Skedoozy

  • *
  • 13
Re: Is CHDK for SX10 possible in the future
« Reply #93 on: 15 / March / 2009, 22:25:52 »
Quote from: fe50 on 15 / March / 2009, 20:12:25
Quote from: Skedoozy on 15 / March / 2009, 18:56:42
Here is the 1.00c dump. I think I did it right. If not please let me know.

Ok, dumping was successful - the fw strings are there...but we need the complete dump file (your zip contains the saved strings).
--> after pressing the "Clean" button, Cardtricks ask you where to store the cleaned dump file - zip this file & upload it  :)

d'oh! Sorry about that. I can read, really I can! :)

Here are both files together.

http://altgn.com/files/SX10_100c.zip
« Last Edit: 15 / March / 2009, 22:29:33 by Skedoozy »
Logged
*

Offline Skedoozy

  • *
  • 13
Re: Is CHDK for SX10 possible in the future
« Reply #94 on: 15 / March / 2009, 22:28:01 »
Quote from: genzbenz on 15 / March / 2009, 20:50:14
Thank you to all who are working on this port.  My mouth is watering in anticipation of trying CHDK on my SX10IS.  With that said, I have firmware GM1.01B.  I attempted to get a firmware dump, but if I insert an SD card with the write protect tab set to "locked" the camera won't turn on.  Is there something that I'm missing?

Thanks!

Yeah, this confused me as well. The camera does nothing at all. Doesn't make a sound, doesn't blink, doesn't even make you breakfast. Just push the play button once it's in and wait for about 45 seconds then take out the batteries, then the card.

But since they already have it I guess it doesn't matter. But just in case someone else reads this that was confused in the future. ;)
Logged
*

Offline genzbenz

  • *
  • 2
Re: Is CHDK for SX10 possible in the future
« Reply #95 on: 15 / March / 2009, 22:34:12 »
Quote from: reyalp on 15 / March / 2009, 20:59:16
genzbenz: The camera isn't expected to boot fully with udumper so it may actually be working. In any case, we already have a 101B dump.



I'm not getting any lights what-so-ever on the camera.  Before I tried to get a dump, I put CHDK in my camera, and it was the same thing.  As long as the SD was set to "LOCK" the camera won't turn on.  Am I the only one who is experiencing this?

Thanks!
Logged
*

Offline reyalp

  • ******
  • 13673
Re: Is CHDK for SX10 possible in the future
« Reply #96 on: 15 / March / 2009, 22:41:04 »
Quote from: genzbenz on 15 / March / 2009, 22:34:12
I'm not getting any lights what-so-ever on the camera.  Before I tried to get a dump, I put CHDK in my camera, and it was the same thing.  As long as the SD was set to "LOCK" the camera won't turn on.  Am I the only one who is experiencing this?
As stated above, this is normal for udumper, and also normal if you try to run the wrong version of CHDK.

edit:
Skedoozy 100c dump looks fine.
« Last Edit: 15 / March / 2009, 22:45:32 by reyalp »
Logged
Don't forget what the H stands for.
*

Offline Skedoozy

  • *
  • 13
Re: Is CHDK for SX10 possible in the future
« Reply #97 on: 15 / March / 2009, 23:14:38 »
Awesome. Thanks, sir!
Logged
*

Offline LukeSkaff

  • *
  • 30
Re: Is CHDK for SX10 possible in the future
« Reply #98 on: 16 / March / 2009, 00:12:39 »
Quote from: genzbenz on 15 / March / 2009, 20:50:14
Thank you to all who are working on this port.  My mouth is watering in anticipation of trying CHDK on my SX10IS.  With that said, I have firmware GM1.01B.  I attempted to get a firmware dump, but if I insert an SD card with the write protect tab set to "locked" the camera won't turn on.  Is there something that I'm missing?

Thanks!

There is already a dump available for 1.01B so this is not needed


Quote from: Skedoozy on 15 / March / 2009, 22:25:52
Here are both files together.

http://altgn.com/files/SX10_100c.zip

Good stuff, updated the SX10 wiki page

EDIT:
Skedoozy, can you please post the three screen results you got from ver.req and vers.req, thanks.
« Last Edit: 16 / March / 2009, 12:15:22 by LukeSkaff »
Logged
*

Offline R0Y.1

  • *
  • 14
  • R0Y.1
Re: Is CHDK for SX10 possible in the future
« Reply #99 on: 17 / March / 2009, 19:06:30 »
Hi guys! This is my first post, and I registered just to say thanks to ewavr, fe50, Gran Canaria (he posted the SX10 1.01A firmware dump quick-enough for people to work on, and I happen to have the same ver), and everybody else who contributed to the development (well, it's still beta, but now I'm optimistic about finally experiencing the real deal). I hope the final version comes out as soon as possible, and I congratulate you all on you success so far. Cheers! :)
« Last Edit: 17 / March / 2009, 19:12:52 by R0Y.1 »
Logged
Pages: 1 ... 5 6 7 8 9 [10] 11 12 13 14 15 ... 62   Go Up
« previous next »
 

Related Topics