Autoboot with 8GB and HDHacker Possibillity - page 11 - General Help and Assistance on using CHDK stable releases - CHDK Forum  

Autoboot with 8GB and HDHacker Possibillity

  • 143 Replies
  • 136643 Views
*

Offline ewavr

  • ****
  • 1057
  • A710IS
Re: Autoboot with 8GB and HDHacker Possibillity
« Reply #100 on: 29 / August / 2008, 07:17:56 »
Advertisements
I did the 2 partitions (FAT16 & FAT32) installed CHDK on FAT16 and made it bootable BUT when i run it, it tells NO MORE SPACE AVALAIBLE... WHY?!! SD800 & Allthebestbuild.. :(

Allbest build for SD800 don't supports now such cards, sorry. Try other build.

Re: Autoboot with 8GB and HDHacker Possibillity
« Reply #101 on: 29 / August / 2008, 07:29:58 »
Please tell me which one work, most important is the video option for me...

*

Offline ewavr

  • ****
  • 1057
  • A710IS
Re: Autoboot with 8GB and HDHacker Possibillity
« Reply #102 on: 29 / August / 2008, 07:56:12 »
Please tell me which one work, most important is the video option for me...
Now - only SDM.
But because SDM sources are available, we can add this support to other builds in one minute  :)

Re: Autoboot with 8GB and HDHacker Possibillity
« Reply #103 on: 29 / August / 2008, 11:50:53 »

But because SDM sources are available, we can add this support to other builds in one minute  :)

Make it two minutes and you can also add support for ixus960  :)


Re: Autoboot with 8GB and HDHacker Possibillity
« Reply #104 on: 29 / August / 2008, 13:16:23 »
SMD does work.. BUT i can't put the memory indicator, also there's something written 5.8 Synch 0.0000... at top right, how do i disable it? Why zoom 5.8 when it's at 0? Also written BIG at top left SET ALT MODE BLANK BROWSE :-[

Re: Autoboot with 8GB and HDHacker Possibillity
« Reply #105 on: 29 / August / 2008, 15:08:01 »
SMD does work.. BUT i can't put the memory indicator, also there's something written 5.8 Synch 0.0000... at top right, how do i disable it? Why zoom 5.8 when it's at 0? Also written BIG at top left SET ALT MODE BLANK BROWSE :-[

All information about using SDM is on the website StereoData Maker
The zoom value is focal length in mm, it cannot be disabled because when taking stereo photos with two cameras you have to make sure both zoom settings are the same.

Enter ALT mode and you can then navigate over 50 OSD's using the left/right buttons.
The first OSD to the left is 'blank'.
If you press the right arrow you will see OSD's for disk space, battery voltage, etc., etc.

You can toggle the currently-displayed OSD on/off with shutter half=press + right arrow in normal mode (not ALT mode).

Re: Autoboot with 8GB and HDHacker Possibillity
« Reply #106 on: 30 / August / 2008, 08:38:39 »
Thanks. Can i put the "zoom..." thing somewhelre else or delete it from the screen? Also i found for memory metter but's it's BIG and takes too much on the screen.... Allthebestbuild was easier..

Re: Autoboot with 8GB and HDHacker Possibillity
« Reply #107 on: 30 / August / 2008, 09:13:54 »
Can i put the "zoom..." thing somewhelre else or delete it from the screen?

No, SDM deliberately restricts how some items are displayed.

Quote
i found for memory metter but's it's BIG and takes too much on the screen
People complained that the displays and text on other builds were too small.
You can hide any display with half-press + right arrow.

Quote
Allthebestbuild was easier..


Then that is the one you should use   :)


*

Offline PhyrePhoX

  • *****
  • 2254
  • make RAW not WAR
    • PhyreWorX
Re: Autoboot with 8GB and HDHacker Possibillity
« Reply #108 on: 30 / August / 2008, 09:25:23 »
i would add multipart support to these 2 cams in both trunk and juciphox branch - i dont know how though. is it just an adress in a stubs file or is there more to it?

*

Offline ewavr

  • ****
  • 1057
  • A710IS
Re: Autoboot with 8GB and HDHacker Possibillity
« Reply #109 on: 30 / August / 2008, 10:02:19 »
i would add multipart support to these 2 cams in both trunk and juciphox branch - i dont know how though. is it just an adress in a stubs file or is there more to it?
For VxWorks cameras:
1. Add  mount.c file in subplatform folder (it would be better add this code to boot.c like for DRYOS)
2. Change Makefile (OBJS=, STUBS_AUTO_DEPS=) in this folder to handle mount.c
3. Add WriteSDCard address to stubs file
4. Add #define CAM_MULTIPART 1 in correspondig section of camera.h
« Last Edit: 30 / August / 2008, 10:07:13 by ewavr »

 

Related Topics