A1000IS porting... - page 22 - DryOS Development - CHDK Forum

A1000IS porting...

  • 297 Replies
  • 158166 Views
Re: A1000IS porting...
« Reply #210 on: 01 / February / 2010, 06:25:45 »
Advertisements
do i need separate script in corelation with my chdk version for motion detection???

Yes, in Common_files.zip in the Scripts folder there should be MDFB-080914.bas.

If it is the correct version it will say at the top of the file "rem Modified to support 'show sample points' option and turn-off synch mode (SDM 1.82 and later)"


David

Re: A1000IS porting...
« Reply #211 on: 01 / February / 2010, 06:26:42 »
Testing latest version for a week,all day long  :D
Noticed some bugs/errors so i want to share them

Just to be clear, are you testing CHDK or SDM version ?


David

Re: A1000IS porting...
« Reply #212 on: 01 / February / 2010, 09:36:46 »
SDM sorry for missunderstanding..Talking about Sdm...  ;)

Re: A1000IS porting...
« Reply #213 on: 01 / February / 2010, 10:58:01 »
problem is override focus.When i set it to ON and try to focus camera shuts down imediatly.
I will look at it.
I would think the CHDK version does the same.
Probably an incorrect address for the focus function.

Quote
zoom,battery,focus,and clock info functions that i set in menu,simply dissapear.

With SDM in ALT mode, a brief press of the FuncSet button turns the screen information on/off.

Is that what you are doing ?


David

Re: A1000IS porting...
« Reply #214 on: 01 / February / 2010, 12:28:14 »
Chdk also make same mistakes that i mentioned.Focus override error etc(all mentioned in earlier posts)>
David,yeah,my mistake FuncSet in Alt mode=Additional data On/Off
Sorry.I am newbie but understanding cameras and photography,so i decided to contribue in testing of a1000is chdk versions,so everything i notice i will post here if you guys dont mind. :)

Re: A1000IS porting...
« Reply #215 on: 01 / February / 2010, 13:36:08 »
Do not apologise for anything, we need people to test builds and report 'problems'.

I will look at the focus problem as soon as I can and report back.

Remember, the CHDK A1000 port was never finished so there may be other bugs.


David

Re: A1000IS porting...
« Reply #216 on: 01 / February / 2010, 15:36:18 »
Ok David  8)
Is there any possability to expect fully workable CHDK for this cam model in the future,like for non DryOs cams?
 ???

Edit:when i set shutter override to values over 1/10000(aprox) when i focus,info on OSD reporting just 1/1600 and after that,no matter what more value i set,it says only 1/1600.When i go below 1/10000 than it seems ok.
Is that Canon software up limit in play mode(review info with details after taking a shot) :blink:
« Last Edit: 01 / February / 2010, 15:42:55 by bekisha »

Re: A1000IS porting...
« Reply #217 on: 02 / February / 2010, 07:54:28 »
Is there any possability to expect fully workable CHDK for this cam model in the future,like for non DryOs cams?
I do not know, someone would have to do it, I certainly do not have time.


Quote
no matter what more value i set,it says only 1/1600.

That is normal behaviour, the Canon firmware does not know the shutter-speed has been overriden.

The uBasic set_focus (or set_focus_to) command uses the same Canon firmware function as the focus-override option.
So, it will probably crash the camera.

After moving the lens, the focus-override function checks the focus distance using the same Canon function as the uBasic 'get_focus' command.
Let us test if that function causes the problem, run this script :-

@title Get focus
sleep_for_seconds 2
get_focus a
line_1 "#Focus ", a
sleep_for_seconds 5
end


Does it crash the camera ?

*

Offline kulen

  • *
  • 14
Re: A1000IS porting...
« Reply #218 on: 05 / February / 2010, 04:39:48 »
Hi

I'm new on this forum.
I have A1000IS fw1.0b.

I'm really trilled with abilities of CHDK and I would like to see it fully functional on my camera.
I believe there are a lot of people that would like it too, because I see there is a lot hits on this A1000 forum. Even much more than on some functional cameras.
Only people probably don't want to register so they don't post.
If you want CHDK to work on your camera please show some interest here and maybe we can get some developer to make it.
Because that's what we are missing, a developer.

I tried last Diablo's version.
Basically it works, with some bugs.
Main ones I noticed are that OSD menus stay on screen after exiting it, and this Focus thing.
When I get time I'll do some more  detailed testing and I'll post results.

That's all I can do because I have no idea about programing.


I'm glad to see something is happening these last few days.
Hope we'll have fully functional CHDK and SDM for A1000 one day
Thank you all putting your effort in it.


@Microfunguy
I'd love to try this your script but have no idea what to do with it?



*

Offline kulen

  • *
  • 14
Re: A1000IS porting...
« Reply #219 on: 05 / February / 2010, 04:42:42 »
I edited A720 camera profile and used it for A1000IS. You just need to rename the camera(setting->camera options->cameraname, shortname) and change resolution(to 3648x2736 in both sensor size and jpeg size). With this I could get them displayed in dng4ps2 but after covert the images displayed were incorrect.


I followed this instructions and I do get picture with irfan view after converting RAW. It looks exactly the same as jpg but its bigger

 

Related Topics


SimplePortal © 2008-2014, SimplePortal