A1000IS porting... - page 17 - DryOS Development - CHDK Forum supplierdeeply
« previous next »
Pages: 1 ... 12 13 14 15 16 [17] 18 19 20 21 22 ... 30   Go Down

A1000IS porting...

  • 297 Replies
  • 137800 Views
*

Offline Microfunguy

  • ****
  • 4037
    • StereoData Maker
Re: A1000IS porting...
« Reply #160 on: 25 / August / 2009, 12:35:35 »
Advertisements
Quote from: EyP3 on 25 / August / 2009, 09:14:42
I would also be glad to be able to use the remote shutter.

While you are waiting, try this version :-

http://www.zshare.net/download/6464259208e07daa/

Rename to DISKBOOT.BIN and replace existing file on your bootable card.

You do not need a script, just press the button.

A quick on/off for focus and press and release to shoot.

Or, a longer press and release when screen blanks.

Does it work ?

(the person I did this for is waiting to buy a Ricoh switch).


David
Logged
*

Offline EyP3

  • *
  • 46
Re: A1000IS porting...
« Reply #161 on: 25 / August / 2009, 18:08:55 »
Quote
While you are waiting, try this version :-

http://www.zshare.net/download/6464259208e07daa/

Rename to DISKBOOT.BIN and replace existing file on your bootable card.

Great!
Thanks!
I can boot from it. What else can I do with SDM?

Quote
You do not need a script, just press the button.

A quick on/off for focus and press and release to shoot.

Or, a longer press and release when screen blanks.

Like this? http://stereo.jpn.org/eng/sdm/ca1.htm

I would like to be able to use the Gentled Switch http://www.gentles.ltd.uk/gentled/options.htm#CHDK

Will that work?

RAW is the same format as discussed above?

Cheers
Norbert

« Last Edit: 25 / August / 2009, 18:15:55 by EyP3 »
Logged
*

Offline Microfunguy

  • ****
  • 4037
    • StereoData Maker
Re: A1000IS porting...
« Reply #162 on: 25 / August / 2009, 18:23:44 »
Quote from: EyP3 on 25 / August / 2009, 18:08:55
. What else can I do with SDM?

A lot ... but first tell me if the remote USB switch works.

If you want the photo to be taken as soon as you press the switch (rather than on release), in menu Bracketing/Overrides set focus-mode to Manual.
'FAST' should be displayed at the top of the screen.

Quote
I would like to be able to use the Gentled Switch http://www.gentles.ltd.uk/gentled/options.htm#CHDK
Will that work?

Certainly will.

Which one do you have ?
I am familiar with the gentLES products.
Just set FAST mode.

Quote
RAW is the same format as discussed above?

Yes.

From the SDM website download Common_files.zip.
At the very least, copy script time_lapse.bas to your Scripts folder.
Read the two pages on the website about the use and testing of that script.


David
« Last Edit: 25 / August / 2009, 18:27:50 by Microfunguy »
Logged
*

Offline EyP3

  • *
  • 46
Re: A1000IS porting...
« Reply #163 on: 25 / August / 2009, 19:20:44 »
Quote
A lot ... but first tell me if the remote USB switch works.
Sorry, don't have any so far.

Quote
If you want the photo to be taken as soon as you press the switch (rather than on release), in menu Bracketing/Overrides set focus-mode to Manual.
'FAST' should be displayed at the top of the screen.
No, just says 'Single shot mode' on top of the screen.

Quote
At the very least, copy script time_lapse.bas to your Scripts folder.
Read the two pages on the website about the use and testing of that script.
Did so, script runs but eventually hangs.

Quote
Which one do you have ?
None so far, was thinking about this one http://www.gentles.ltd.uk/gentled/gentled-ricoh3.jpg

Norbert

Logged
*

Offline Microfunguy

  • ****
  • 4037
    • StereoData Maker
Re: A1000IS porting...
« Reply #164 on: 25 / August / 2009, 19:35:15 »
Quote from: EyP3 on 25 / August / 2009, 19:20:44
Sorry, don't have any so far.

Test by connecting camera to computer with the USB lead, that will provide a 5V signal.

Quote
No, just says 'Single shot mode' on top of the screen.
I think you mean  DIRECT.
There is text for two focus modes.
I should have said focus mode that comes after 'focus step size'


Quote
Did so, script runs but eventually hangs.

Before running script, directly press shutter button.
'Synch' should no longer be displayed.
Then run the script.




Time for bed  ........


David
Logged
*

Offline EyP3

  • *
  • 46
Re: A1000IS porting...
« Reply #165 on: 25 / August / 2009, 19:52:43 »
Quote
Test by connecting camera to computer with the USB lead, that will provide a 5V signal.
ok, will try that

Quote
I should have said focus mode that comes after 'focus step size'
ok, 'fast' appears

Quote
Before running script, directly press shutter button.
'Synch' should no longer be displayed.
Then run the script.
still hangs when I change from dark to bright scene or vice versa during script

Quote
Time for bed  ........
same :-)

Norbert
Logged
*

Offline EyP3

  • *
  • 46
Re: A1000IS porting...
« Reply #166 on: 26 / August / 2009, 08:27:46 »

Quote
Test by connecting camera to computer with the USB lead, that will provide a 5V signal.

When I connect and disconnect USB a shot is triggered with disconnect, when flash is switched on the flash is triggered with both connect and disconnect.

Norbert
Logged
*

Offline Microfunguy

  • ****
  • 4037
    • StereoData Maker
Re: A1000IS porting...
« Reply #167 on: 26 / August / 2009, 08:41:20 »
Quote from: EyP3 on 26 / August / 2009, 08:27:46
the flash is triggered with both connect and disconnect.

That is the preflash (for white balance) and main flash.

When you say that time-lapse script does not work, can you describe in more detail ?

That would be very unusual, the code is common to all models of camera.


David
Logged
*

Offline EyP3

  • *
  • 46
Re: A1000IS porting...
« Reply #168 on: 26 / August / 2009, 09:08:59 »
Quote
still hangs when I change from dark to bright scene or vice versa during script

Script starts ok, I see the countdown to the next shot, and so on, shoots several pics, then pan the cam to another scene and the cam hangs (dark display, no reaction until switch on/off).

Norbert

Logged
*

Offline Microfunguy

  • ****
  • 4037
    • StereoData Maker
Re: A1000IS porting...
« Reply #169 on: 26 / August / 2009, 09:37:28 »
Does the script end after the three shots ?

If so, what happens if you do not pan the camera and start the script again ?


David
Logged
Pages: 1 ... 12 13 14 15 16 [17] 18 19 20 21 22 ... 30   Go Up
« previous next »
 

Related Topics