SX110IS - howto start porting - page 30 - DryOS Development - CHDK Forum  

SX110IS - howto start porting

  • 573 Replies
  • 231568 Views
Re: SX110IS - howto start porting
« Reply #290 on: 26 / April / 2009, 17:40:31 »
Advertisements
i've moved the old chdk config and started to reconfig - maybe it was
since then no error

*

Offline chdkj

  • ***
  • 140
Re: SX110IS - howto start porting
« Reply #291 on: 27 / April / 2009, 01:27:09 »
The first line of the file looks normal to me gvim, windows
Code is correct , sorry. Mixed something up on my own installation with diffs.
Regards.
sx110

Re: SX110IS - howto start porting
« Reply #292 on: 27 / April / 2009, 09:32:07 »
Autobuild is working again...

updated wiki

Canon PowerShot SX110 IS
CHDK: at Autobuild now
Wiki: SX110IS

*

Offline axu89

  • *
  • 29
Re: SX110IS - howto start porting
« Reply #293 on: 27 / April / 2009, 10:04:51 »
4) Has anyone managed to make any of the motion detection scripts work on the SX110IS?

Nope  ???  I tried everything I found from wiki but couldn't get them to work properly.. The "Multipurpose Motion Detection" runs but seems to detect motion everywhere, no matter how I try to calibrate it.  :(

same here...

@axu89
Try fudgey's Fast MD script...

just tried.. same problem

Greetings

I tried it too, works like the Multipurpose MD. If I turn threshold up to >100 it wont trigger by itself nor with motion. I also tried tuning the other parameters like with the other scripts but no, it wont work like it should. :(
[SX110 IS]


*

Offline chdkj

  • ***
  • 140
Re: SX110IS - howto start porting
« Reply #294 on: 27 / April / 2009, 14:52:36 »
I tried it too, works like the Multipurpose MD. If I turn threshold up to >100 it wont trigger by itself nor with motion. I also tried tuning the other parameters like with the other scripts but no, it wont work like it should. :(
Didn't play with scripts so far but did you try do mask some cells? There are hints about at the sx1-thread (http://chdk.setepontos.com/index.php/topic,3410.msg33072.html#msg33072).
sx110

*

Offline axu89

  • *
  • 29
Re: SX110IS - howto start porting
« Reply #295 on: 27 / April / 2009, 15:32:11 »
I tried it too, works like the Multipurpose MD. If I turn threshold up to >100 it wont trigger by itself nor with motion. I also tried tuning the other parameters like with the other scripts but no, it wont work like it should. :(
Didn't play with scripts so far but did you try do mask some cells? There are hints about at the sx1-thread (http://chdk.setepontos.com/index.php/topic,3410.msg33072.html#msg33072).

I tried. But if you try running the script, you will notice that masking the border cells is useless since motion is detected everywhere "randomly". Its strange..?  ??? Maybe Im doing something terribly wrong? :o
[SX110 IS]

*

Offline chdkj

  • ***
  • 140
Re: SX110IS - howto start porting
« Reply #296 on: 27 / April / 2009, 15:46:13 »
Just an update:
Still some issues left (http://chdk.wikia.com/wiki/SX110IS#Known bugs.
- Scripts (at least Motion Detection Scripts) are not working as expected --> ?.
- Zebra draws dots over whole LCD screen (and from time to time even the expected zebra patterns -blink 2 or 3 times-) already with low sensitivity for both over and under exposured areas (the more sensitivity the more dots will be drawn) --> No clue.
- GetBatteryTemperature crashes the cam: hmm, what do to? Do we have really an originally broken function here?
- Auto-ISO-Shift doesn't work (http://chdk.setepontos.com/index.php/topic,2838.msg32856.html#msg32856) -->I'm really unsure about this. It seems to me that Auto-ISO-Shift works as expected: ISO selecting by camera will controlled by user settings.
- ColorMatrix (for RAW/DNG) is still unsolved.

I've checked all camera dependent code and now I'm running out of ideas.
« Last Edit: 27 / April / 2009, 15:53:03 by chdkj »
sx110

*

Offline chdkj

  • ***
  • 140
Re: SX110IS - howto start porting
« Reply #297 on: 27 / April / 2009, 15:51:09 »
I tried. But if you try running the script, you will notice that masking the border cells is useless since motion is detected everywhere "randomly". Its strange..?  ??? Maybe Im doing something terribly wrong? :o
Ok, thanks for testing. Don't think that you are doing something wrong regarding MD-scripts ;-). Can't exclude that some other things are broken in SX110-port and you are trapping in a subsequent error.
sx110


*

Offline PhyrePhoX

  • *****
  • 2254
  • make RAW not WAR
    • PhyreWorX
Re: SX110IS - howto start porting
« Reply #298 on: 27 / April / 2009, 16:09:41 »
perhaps ewavr or fudgey can take a look at the getbattery stuff in the dumps. if they cant find the function, nobody can ;)

*

Offline Hyst

  • *
  • 18
Re: SX110IS - howto start porting
« Reply #299 on: 27 / April / 2009, 16:13:53 »
- Auto-ISO-Shift doesn't work (http://chdk.setepontos.com/index.php/topic,2838.msg32856.html#msg32856) -->I'm really unsure about this. It seems to me that Auto-ISO-Shift works as expected: ISO selecting by camera will controlled by user settings.

hmm... why are you unsure about this...
here is what i do (an example):

(auto-iso-shift must be enabled in the canon-options and alt-key must be the print-button)

I am sitting in a dark room. Boot the cam WITHOUT CHDK. P-Mode. Iso is manually set to 80.
I am holding the shutter half-pressed. it shows:
   ISO 80 ; exposure 1/5
The print button glows blue. I press it. Now the settings changed to recommended auto-settings
   ISO 320^ ; exposure 1/20

now i boot the cam WITH CHDK. (same room. same settings)
I am holding the shutter half-pressed. it shows:
   ISO 80 ; exposure 1/5
The print button glows blue. I press it. and nothing changes. neither with a short press nor a long press.

what are you doing (or rather why does it work as expected with your cam)?

greetings
Canon Powershot SX110

 

Related Topics


SimplePortal 2.3.6 © 2008-2014, SimplePortal