SX110IS - howto start porting - page 34 - DryOS Development - CHDK Forum supplierdeeply

SX110IS - howto start porting

  • 573 Replies
  • 231072 Views
Re: SX110IS - howto start porting
« Reply #330 on: 01 / May / 2009, 09:57:49 »
Advertisements
« Last Edit: 01 / May / 2009, 10:06:59 by Obihoernchen »
Canon PowerShot SX110 IS
CHDK: at Autobuild now
Wiki: SX110IS

*

Offline GnF

  • *
  • 12
Re: SX110IS - howto start porting
« Reply #331 on: 01 / May / 2009, 10:15:55 »
Anyone know a way for me to hide chdk osd while i preview the already taken photos? I seem not able to find a way to hide 3 things till now.

Battery and battery data (% or voltage)
Time
Temperature (either one of the 3 or all of them).

I think i was able to hide them till 754
Canon SX110 IS

*

Offline axu89

  • *
  • 29
Re: SX110IS - howto start porting
« Reply #332 on: 01 / May / 2009, 10:54:28 »
nice construction ^^

edited the article dont know wheather this is right? min. 3,6V / Wake-up: No ?
I'll try to figure out the other values like TV and so on

Hmm.. I believe the min. is 3,4V like many other cameras but I dont have proper means to test it accurately. 3,6-3,7 work but its not the minimum.
Put it this way: 3,6V OK / Wake-up: No

Thanks! :)

Anyone know a way for me to hide chdk osd while i preview the already taken photos? I seem not able to find a way to hide 3 things till now.

Battery and battery data (% or voltage)
Time
Temperature (either one of the 3 or all of them).

I think i was able to hide them till 754

Main Menu -> OSD parameters -> Hide OSD: In Play
[SX110 IS]

Re: SX110IS - howto start porting
« Reply #333 on: 01 / May / 2009, 11:37:21 »
nice construction ^^

edited the article dont know wheather this is right? min. 3,6V / Wake-up: No ?
I'll try to figure out the other values like TV and so on

Hmm.. I believe the min. is 3,4V like many other cameras but I dont have proper means to test it accurately. 3,6-3,7 work but its not the minimum.
Put it this way: 3,6V OK / Wake-up: No

done
Canon PowerShot SX110 IS
CHDK: at Autobuild now
Wiki: SX110IS


*

Offline GnF

  • *
  • 12
Re: SX110IS - howto start porting
« Reply #334 on: 01 / May / 2009, 12:23:26 »
nice construction ^^

edited the article dont know wheather this is right? min. 3,6V / Wake-up: No ?
I'll try to figure out the other values like TV and so on

Hmm.. I believe the min. is 3,4V like many other cameras but I dont have proper means to test it accurately. 3,6-3,7 work but its not the minimum.
Put it this way: 3,6V OK / Wake-up: No

Thanks! :)

Anyone know a way for me to hide chdk osd while i preview the already taken photos? I seem not able to find a way to hide 3 things till now.

Battery and battery data (% or voltage)
Time
Temperature (either one of the 3 or all of them).

I think i was able to hide them till 754

Main Menu -> OSD parameters -> Hide OSD: In Play

Nice now i dont see battery info.
Still Time and temperature are still there
Canon SX110 IS

Re: SX110IS - howto start porting
« Reply #335 on: 01 / May / 2009, 13:44:15 »
Wow what a nice cam!
I tested Motion Detection a little bit here is the result :)

Between 80 and 90ms! Without any optimization!

Canon PowerShot SX110 IS
CHDK: at Autobuild now
Wiki: SX110IS

*

Offline axu89

  • *
  • 29
Re: SX110IS - howto start porting
« Reply #336 on: 01 / May / 2009, 14:09:47 »
Wow what a nice cam!
I tested Motion Detection a little bit here is the result :)

Between 80 and 90ms! Without any optimization!



Hmm.. nice :O I got "only" 100ms :/ Ill try again with some tweaking
[SX110 IS]

Re: SX110IS - howto start porting
« Reply #337 on: 01 / May / 2009, 14:25:33 »
I will test it with MD Test 3 too
but later...
Canon PowerShot SX110 IS
CHDK: at Autobuild now
Wiki: SX110IS


Re: SX110IS - howto start porting
« Reply #338 on: 01 / May / 2009, 17:34:09 »
tested MD a little bit more and tweaked some settings...

Result: 60ms  :o




<-- 50ms? I looks strange

PS: http://chdk.wikia.com/wiki/CameraFeatures added ISO and MD Speed
« Last Edit: 01 / May / 2009, 17:50:10 by Obihoernchen »
Canon PowerShot SX110 IS
CHDK: at Autobuild now
Wiki: SX110IS

*

Offline lucmovel

  • *
  • 13
  • SX110 IS
Re: SX110IS - howto start porting
« Reply #339 on: 01 / May / 2009, 22:16:51 »
My experience with MD isn't going so well. Which script are you folks using, and what parameters?

 

Related Topics


SimplePortal 2.3.6 © 2008-2014, SimplePortal