A580 porting - minor progress

  • 125 Replies
  • 30044 Views
Re: A580 porting - minor progress
« Reply #110 on: 23 / September / 2010, 11:25:02 »
Advertisements

proDOOMman , I have followed your link & downloaded the file but it did not work on my cam ( i followed the instructions on the chdk site for making the memory card boot-able ) ......
i really wish you luck in porting this cam. I've been waiting for a long time now & actually thought of getting a new 1 before i read your post about your success with porting this cam
P.S my firmware version is  GM 1.00C
best of luck & let me know if you need to test any of your codes on my cam...

Re: A580 porting - minor progress
« Reply #111 on: 24 / September / 2010, 03:45:28 »
About a week ago I get a580 and start porting CHDK. Some features already works, for example RAW. All sources avaliable in git repo: http://github.com/proDOOMman/CHDK-a580
andydansby, thanks for stubs =)

proDOOMman , I have followed your link & downloaded the file but it did not work on my cam ( i followed the instructions on the chdk site for making the memory card boot-able ) ......
i really wish you luck in porting this cam. I've been waiting for a long time now & actually thought of getting a new 1 before i read your post about your success with porting this cam
P.S my firmware version is  GM 1.00C
best of luck & let me know if you need to test any of your codes on my cam...

Re: A580 porting - minor progress
« Reply #112 on: 25 / September / 2010, 04:25:08 »

Re: A580 porting - minor progress
« Reply #113 on: 07 / April / 2011, 09:51:55 »
proDOOMman, on what CHDK version is your port based? I've tried it with subversion trunk and got some undefined references:

camera_set_led
_add_ptp_handler
_Rec2PB
_set_control_event
_PB2Rec
_Restart
_reboot_fw_update

I assume these are functions that have been added between your port was made and trunk.


Re: A580 porting - minor progress
« Reply #114 on: 07 / April / 2011, 15:24:53 »
I was able to make it work! (changed proDOOMman's ubasic_set_led to camera_set_led and added dummy functions for the other ones)

If somebody wants to test it, I've published a compiled version on http://200.69.223.160/~horape/DISKBOOT.BIN

*

Offline msl

  • *****
  • 1215
  • A720 IS, SX220 HS 1.01a
    • CHDK inside
Re: A580 porting - minor progress
« Reply #115 on: 08 / April / 2011, 08:56:15 »
I've try your patch with CHDK-DE. The compiling was successfull. The missing addresses were found.

Can you test the attached build? I made some minor changes. Also stubs_entry_2 must be cleaned up.

msl
German CHDK pages:  CHDK forum | CHDK inside | CHDK Twitter News by msl | Download CHDK-DE (Autobuild)
Note: SDM violates the GPL rules!

Re: A580 porting - minor progress
« Reply #116 on: 08 / April / 2011, 09:23:28 »
It runs correctly (I have just tried the trivial things, some photos, a video, zebra stripes)

I don't know how to clean stubs_entry_2. Could you give me a hint on what needs to be done so I can read on it and try to do it?

*

Offline msl

  • *****
  • 1215
  • A720 IS, SX220 HS 1.01a
    • CHDK inside
Re: A580 porting - minor progress
« Reply #117 on: 08 / April / 2011, 09:58:09 »
It runs correctly

That's nice. So we can integrate the A580 into CHDK-DE.

I don't know how to clean stubs_entry_2.

Double entries (stubs_entry and stubs_entry_2) should be deleted in stubs_entry_2.

msl
German CHDK pages:  CHDK forum | CHDK inside | CHDK Twitter News by msl | Download CHDK-DE (Autobuild)
Note: SDM violates the GPL rules!


Re: A580 porting - minor progress
« Reply #118 on: 03 / August / 2011, 02:47:37 »
Hello People, how is going progress with A580 1.00c?
I'm sorry can't help. My knowledge for programing are none. :(


link to dump file from my A580 1.00c

http://www.filedropper.com/a580100c


P.P. Cardtricks make only this, so..... hope is correct. :)
 I add this link and to Wiki page of A580
« Last Edit: 03 / August / 2011, 14:22:07 by ice_flame83 »

Re: A580 porting - minor progress
« Reply #119 on: 19 / August / 2011, 08:52:08 »
Updated and fixed A580:

NOTES:
Half Shutter + Left - Sets AFL
Half Shutter + Right - Toogle OSD on/off
Half Shutter + Up - Sets AEL
Half Shutter + Down - Toggle Histogram (Don't / Always / Shoot)
Half Shutter + Menu - Toggle Zebra on/off
Half Shutter + Display - Disable overrides

In Alt:
Display - Toogle RAW on/off
Up - Toogle MF

In ALT + Manual mode:
Display - Sets Infinity
Down - Sets Hyperfocal
-------
Adjustable Alt button supported.
-------
User menu works.


PLEASE TEST:
These Manual Focus adjustments can also be achieved with shortcut keys.
In <ALT> mode, using the LEFT / RIGHT keys to adjust the Value Factor and the Zoom lever to adjust the Subject Distance.
Seems it works, please test!!!
-------
Curves: Seems it works, please test!!!
-------
SDHC multi-partition boot and swap supported. (Tested with 2GB SD (2MB  FAT12 and FAT32 the rest), can someone test it with a larger card 8GB, 16GB...)


NOT WORKING:
Enable Fast EV Switch: activates ISO/Continous mode
!Workaround:
http://chdk.setepontos.com/index.php/topic,2501.msg23321.html#msg23321
-------
Video: fast video control (on Left (Pause) camera hangs), disabled, not supported?
-------
Firm Update from menu doesn't work (camera hangs)

On Display: (It's correct?)
-----------------------------
Update firmware version?
1.0.1.0 > 1.0.0.0
-----------------------------
Anyone knows why?

I'm using ps.fi2 from fi2encdec, because with file from SVN appers on display "Update File Error!!!".
« Last Edit: 19 / August / 2011, 19:02:12 by mipa87 »

 

Related Topics