Use a point and shoot canon as a trigger for en EOS - Creative Uses of CHDK - CHDK Forum
« previous next »
Pages: [1]   Go Down

Use a point and shoot canon as a trigger for en EOS

  • 9 Replies
  • 9986 Views
*

Offline maestrodellatorre

  • *
  • 16
Use a point and shoot canon as a trigger for en EOS
« on: 03 / February / 2009, 09:57:34 »
Advertisements
Hi all,

I really love the lightning stuff in the CHDK, but unfortunately I cannot use it with the new EOS 1000D I'm about to buy.

But I was wandering...could I use the compact to trigger the EOS? I just need to modify the lightning script so that, instead of taking a photo, send a signal on a cable...and that, with very little electronic, can trigger the EOS.

Is it possible? Any comment or help?
Logged
Ixus 80IS fw ver. 101a - CHDK ver. 0.9.1-678 (13 jan 2009) - GCC 4.3.2
*

Offline Microfunguy

  • ****
  • 4037
    • StereoData Maker
Re: Use a point and shoot canon as a trigger for en EOS
« Reply #1 on: 03 / February / 2009, 14:15:56 »
Quote from: maestrodellatorre on 03 / February / 2009, 09:57:34
I just need to modify the lightning script so that, instead of taking a photo, send a signal on a cable...and that, with very little electronic, can trigger the EOS.
Is it possible?

Of course.

Instead of taking a photo, light an LED.
A simple photo-diode or photo-transistor interface will trigger your EOS.

In the 'early' days, that is how firmware was dumped.

Logged
*

Offline maestrodellatorre

  • *
  • 16
Re: Use a point and shoot canon as a trigger for en EOS
« Reply #2 on: 04 / February / 2009, 05:58:26 »
Quote from: Microfunguy on 03 / February / 2009, 14:15:56
Quote from: maestrodellatorre on 03 / February / 2009, 09:57:34
I just need to modify the lightning script so that, instead of taking a photo, send a signal on a cable...and that, with very little electronic, can trigger the EOS.
Is it possible?

Of course.

Instead of taking a photo, light an LED.
A simple photo-diode or photo-transistor interface will trigger your EOS.

In the 'early' days, that is how firmware was dumped.



Ah, very interesting...yes, you're right...and this also solves the issue of electrically separating the 2 devices...the photodiode can be used to short circuit the 2 pins dedicated to the remote shutter...

I just wonder if time-response wise this is fast enough...which is the distance from on bit to the following in the former way to obtain the dump?


Logged
Ixus 80IS fw ver. 101a - CHDK ver. 0.9.1-678 (13 jan 2009) - GCC 4.3.2
*

Offline fe50

  • ******
  • 3152
  • IXUS50 & 860, SX10 Star WARs-Star RAWs
    • fe50
Re: Use a point and shoot canon as a trigger for en EOS
« Reply #3 on: 04 / February / 2009, 07:32:11 »
Quote from: maestrodellatorre on 04 / February / 2009, 05:58:26
I just wonder if time-response wise this is fast enough...which is the distance from on bit to the following in the former way to obtain the dump?

More details about dumper hardware & timings needed ?
  --> see Porting the CHDK - Hardware-software solution.
Logged
*

Offline maestrodellatorre

  • *
  • 16
Re: Use a point and shoot canon as a trigger for en EOS
« Reply #4 on: 04 / February / 2009, 11:04:45 »
Quote from: fe50 on 04 / February / 2009, 07:32:11
Quote from: maestrodellatorre on 04 / February / 2009, 05:58:26
I just wonder if time-response wise this is fast enough...which is the distance from on bit to the following in the former way to obtain the dump?

More details about dumper hardware & timings needed ?
  --> see Porting the CHDK - Hardware-software solution.

Ok, 9600 bps, it's more or less 0,1ms between bits...veeeery fast;)

As soon as I buy the EOS l'll try it (meanwhile I could also mess around with the led...it's something that do not add so much delay...I could include a led blink everytime the camera takes a shot in the lightning script...)
Logged
Ixus 80IS fw ver. 101a - CHDK ver. 0.9.1-678 (13 jan 2009) - GCC 4.3.2
*

Offline PhyrePhoX

  • *****
  • 2254
  • make RAW not WAR
    • PhyreWorX
Re: Use a point and shoot canon as a trigger for en EOS
« Reply #5 on: 04 / February / 2009, 11:11:55 »
perhaps it is possible to trigger the dslr via an external flash, which in turn is triggered by the chdk camera's flash. i will conduct some tests as soon as i have the cables.
Logged
*

Offline ISO64

  • *
  • 20
  • S3 IS + A550
Re: Use a point and shoot canon as a trigger for en EOS
« Reply #6 on: 04 / February / 2009, 12:50:25 »
Triggering will work only if the second flash is used in "slave" mode. EOS exposure should be long enough to squeeze in the second flash. I have not yet figured a way how to activate EOS with no additional hardware. EOS IR remote receiver does not work since the the proper code is not received. Wired input requires a phototransistor + hardware...

But, if someone out there can scope the bit sequence emitted from the IR remote, then coders could program the same code(guessing, 12 bit) into the output LED. Then put master camera (P&S) so that the LED can be seen by EOS IR receiver.

Oh, yes: you can use your digital camera to record the IR transmitter code sequence: complete darkness, exposure 2 s or more, sweep IR while pointing to the lens and press a button. You will see a series of dots in the image, that is your code.
Logged
*

Offline maestrodellatorre

  • *
  • 16
Re: Use a point and shoot canon as a trigger for en EOS
« Reply #7 on: 14 / February / 2009, 04:21:08 »
I'd be eager to use the phototransistor+HW solution...but with my camera is impossible (until now) to make a led blink (one of the few limitation of the porting). As soon as the limitation is overcome I'll start testing.
Logged
Ixus 80IS fw ver. 101a - CHDK ver. 0.9.1-678 (13 jan 2009) - GCC 4.3.2
*

Offline toinech

  • ***
  • 105
Re: Use a point and shoot canon as a trigger for en EOS
« Reply #8 on: 18 / February / 2009, 17:08:10 »
Quote from: maestrodellatorre on 03 / February / 2009, 09:57:34
Hi all,

I really love the lightning stuff in the CHDK, but unfortunately I cannot use it with the new EOS 1000D I'm about to buy.

But I was wandering...could I use the compact to trigger the EOS? I just need to modify the lightning script so that, instead of taking a photo, send a signal on a cable...and that, with very little electronic, can trigger the EOS.

Is it possible? Any comment or help?

You may want to rig one of these through the standard external shutter control:
- http://www.solorb.com/elect/lightning/index.html
- http://www.electronics-lab.com/projects/science/001/index.html

If you want to do living things you may want to use some IR motion detector (e.g. from your front door).

Toine
« Last Edit: 18 / February / 2009, 17:16:47 by toinech »
Logged
*

Offline maestrodellatorre

  • *
  • 16
Re: Use a point and shoot canon as a trigger for en EOS
« Reply #9 on: 22 / February / 2009, 05:30:50 »
Quote from: toinech on 18 / February / 2009, 17:08:10

You may want to rig one of these through the standard external shutter control:
- http://www.solorb.com/elect/lightning/index.html
- http://www.electronics-lab.com/projects/science/001/index.html

If you want to do living things you may want to use some IR motion detector (e.g. from your front door).

Toine


tnx!

I already found the first one, but not the second one. In case the porting problem is not eventually solved, well, I'll have to build one of those things...
Logged
Ixus 80IS fw ver. 101a - CHDK ver. 0.9.1-678 (13 jan 2009) - GCC 4.3.2
Pages: [1]   Go Up
« previous next »
 

Related Topics


SimplePortal © 2008-2014, SimplePortal