Eos 400d ( Rebel XTI ) - page 4 - DSLR Hack development - CHDK Forum supplierdeeply
« previous next »
Pages: 1 2 3 [4] 5 6 7 8 9 ... 188   Go Down

Eos 400d ( Rebel XTI )

  • 1871 Replies
  • 835909 Views
*

Offline T.B.

  • *
  • 19
Re: Eos 400d ( Rebel XTI )
« Reply #30 on: 16 / June / 2009, 12:48:24 »
Advertisements
Set to ISO1600 -> Done
Wait 4 secs until your viewfinder display turn off -> The viewfinder display never turned on?
press direct print -> nothings happens. :(
take a picture, press DISP and find ISO value -> nothing :(

Something is wrong here :(
« Last Edit: 16 / June / 2009, 12:56:18 by T.B. »
Logged
*

Offline thaibv

  • **
  • 57
  • Canon 400d: Spot, ISO 3200 and more
Re: Eos 400d ( Rebel XTI )
« Reply #31 on: 16 / June / 2009, 12:56:57 »
Quote from: T.B. on 16 / June / 2009, 12:48:24
Set to ISO1600 -> Done
Wait 4 secs until your viewfinder display turn off -> What do you mean? The big display? It turns off after 30 secs (Auto-Power-Off!).  And nothing happens when it turns off and i press "Direct Print".
Do you mean "review-time", after i've taken a picture?

When you press shutter button halfway down, your viewfinder display some information in green.
After release shutter button, you should wait 4 sec until it off then press DirectPrint.

Press DISP. one or two times while in review time to show image data (include ISO value).
« Last Edit: 16 / June / 2009, 13:11:29 by thaibv »
Logged
999 Members and 9999 Guests are viewing this board.
*

Offline T.B.

  • *
  • 19
Re: Eos 400d ( Rebel XTI )
« Reply #32 on: 16 / June / 2009, 13:09:03 »
I edited my posting above.

No. Nothing happens. But the card is prepared like your guide. Look at the screenshots.
Logged
*

Offline thaibv

  • **
  • 57
  • Canon 400d: Spot, ISO 3200 and more
Re: Eos 400d ( Rebel XTI )
« Reply #33 on: 16 / June / 2009, 13:13:33 »
@T.B.

Remove your battery and try again once more.
 
To make sure that your card is prepared correctly: Does your Drect Print button blink in blue several times right after power on?

and What is your firmware version?  Please update to the lastest 1.1.1
« Last Edit: 16 / June / 2009, 13:16:47 by thaibv »
Logged
999 Members and 9999 Guests are viewing this board.
*

Offline T.B.

  • *
  • 19
Re: Eos 400d ( Rebel XTI )
« Reply #34 on: 16 / June / 2009, 13:22:54 »
I removed battery. I removed backup battery, too.

The cam resets, i've to adjust time and date. All settings are deleted. But the button doesn't blink.
What can be wrong with the CF-Card? You can see the screenshots. I think, everything is all right?

Firmwareversion is 1.1.1
Logged
*

Offline thaibv

  • **
  • 57
  • Canon 400d: Spot, ISO 3200 and more
Re: Eos 400d ( Rebel XTI )
« Reply #35 on: 16 / June / 2009, 13:41:56 »
@ T.B.
I've download mine uploded .bin file from http://depositfiles.com/files/qprih7jiz
and tested in my 400d. It work fine.

I'm sure that your card still can not boot (not bootable), but please try this:
- Delete the file autoexec.bin from your card 's root directory.
- Insert your card into your 400d and turn the power on.
->If your camera turn on normaly, your card is not bootable
->If your camera can not turn on, your card is bootable (and it hang because it can not find the autoexec.bin file)

Good luck!
Logged
999 Members and 9999 Guests are viewing this board.
*

Offline matthias87

  • *
  • 7
Re: Eos 400d ( Rebel XTI )
« Reply #36 on: 16 / June / 2009, 13:52:25 »
Logged
*

Offline vatoz

  • *
  • 17
Re: Eos 400d ( Rebel XTI )
« Reply #37 on: 16 / June / 2009, 13:56:07 »
Same for me.
I have latest 1.1.1 FW (on XTi body),  2 different cards (512 Kingston  and 2048 Sandisk), one formated in camera and second using system tools( parted).
Camera doesn't blink with autoexec.bin and can start without it ( even after removing of both batteries.)
« Last Edit: 16 / June / 2009, 14:08:31 by vatoz »
Logged
*

bugmenot

Re: Eos 400d ( Rebel XTI )
« Reply #38 on: 16 / June / 2009, 13:58:24 »
Yeah, full agree, ive tried it with an platinum 1gb and a sandisk extreme III 2gb --> no blue light

pls show me the place in hex, where "bootdisk" should stand (0x40) cant find this (maybe as coordinates or a screenpicture)
Logged
*

Offline matthias87

  • *
  • 7
Re: Eos 400d ( Rebel XTI )
« Reply #39 on: 16 / June / 2009, 13:59:46 »
See one page before, there is a fullguide with many pictures.
Logged
Pages: 1 2 3 [4] 5 6 7 8 9 ... 188   Go Up
« previous next »
 

Related Topics