s80 anybody? - page 19 - General Discussion and Assistance - CHDK Forum

s80 anybody?

  • 205 Replies
  • 99246 Views
Re: s80 anybody?
« Reply #180 on: 12 / November / 2012, 14:55:27 »
Advertisements
can someone re-upload this files, the links are broken?  :(

Thank you so much!!

Re: s80 anybody?
« Reply #181 on: 12 / November / 2012, 14:58:21 »
can some one re upload CHDKS80e.exe file? the link is broken

Thank you so much

Re: s80 anybody?
« Reply #182 on: 15 / November / 2012, 02:34:14 »

*

Offline srsa_4c

  • ******
  • 4451
Re: s80 anybody?
« Reply #183 on: 07 / February / 2013, 12:48:51 »
I have checked in the 1.00g port. Autobuild won't be enabled until somebody confirms that record mode features work as intended (I can't test those).

Quote
Current source is based on the source provided by Lionfish, with the following changes:

- several addresses have been corrected (functions, firmware variables)
- jogdial is supported
- no special shortcuts are defined
- DNG should work, but will have black borders (until someone defines the active area)

Not changed:

- capt_seq.c and movie_rec.c is unverified, mostly untouched

Issues:

- To start in play mode, press and hold the play [>] button until the camera starts

Attached is a current CHDK 1.1 build.


*

Offline srsa_4c

  • ******
  • 4451
Re: s80 anybody?
« Reply #184 on: 22 / March / 2013, 21:15:17 »
Autobuild won't be enabled until somebody confirms that record mode features work as intended (I can't test those).
Camera working again, I have finished the port and enabled autobuild.
Changes (list not complete):
- DNG works (colors are not calibrated, cropping is based on 1 camera's photos)
- movie mode works (optical zoom, focus override, quality overrides work, af-scan not)
- subject distance override is only available in AF lock or during movie recording
- extra long exposures are available
- CHDK PTP is restricted to play mode, mode switch doesn't work

Re: s80 anybody?
« Reply #185 on: 22 / March / 2013, 23:25:40 »
I'd just like to add a major "props" to srsa_4c for his work keeping older Canon P&S cameras current with CHDK.   Its frustrating to know there are thousands of older Canon P&S cameras sitting abandoned in people's drawers that could be used to have so much photo fun with CHDK if only people knew!

If you are reading this - its your job to help spread the word.
Ported :   A1200    SD940   G10    Powershot N    G16

PS S80 updates?
« Reply #186 on: 05 / August / 2013, 00:02:38 »
Any further updates to the CHDK Powershot S80?

I downloaded the 1.1.0 version for testing, will get back with some results.

Thanks very much for your work!

Charlie
« Last Edit: 05 / August / 2013, 00:29:09 by powershots80 »

*

Offline reyalp

  • ******
  • 14114
Re: PS S80 updates?
« Reply #187 on: 05 / August / 2013, 00:15:55 »
Any further updates to the CHDK Powershot S80?
Support for s80 firmware 100g is included in the autobuild: http://mighty-hoernsche.de/
Don't forget what the H stands for.


Re: s80 anybody?
« Reply #188 on: 05 / August / 2013, 00:34:10 »
OK, I'll try your 1.2.0 version too. 
Thanks for your update!

Charlie

Re: s80 anybody?
« Reply #189 on: 05 / August / 2013, 03:01:17 »
I tested release 1.1.0 for my Powershot S80 today:
I used and had no problems with:
Exposure Modes Auto,Tv,Av,M,C and panoramic
Video, zooms during recording, autofocuses at beginning of video
OSD settings no hangs or crashes
I need and use the manual flash setting at the lowest for all exposure modes since I am using a external strobe so the onboard flash is only a trigger for firing the strobe.
RAW captured and named file extension of .dng

This release is fine for my UW photo usage.

Thank you very much for your work!

Charlie

 

Related Topics


SimplePortal 2.3.6 © 2008-2014, SimplePortal