Sx10 version 1.0.3.0 - CHDK Releases - CHDK Forum
« previous next »
Pages: [1] 2   Go Down

Sx10 version 1.0.3.0

  • 11 Replies
  • 6732 Views
*

Offline fercanon

  • *
  • 2
Sx10 version 1.0.3.0
« on: 24 / June / 2009, 13:42:35 »
Advertisements
My camera is a sx10 and is the version is 1.0.3.0.
Is there a chdk for this version?
Logged
*

Offline fe50

  • ******
  • 3152
  • IXUS50 & 860, SX10 Star WARs-Star RAWs
    • fe50
Re: Sx10 version 1.0.3.0
« Reply #1 on: 25 / June / 2009, 03:48:01 »
Hello & welcome, fercanon !
Quote from: fercanon on 24 / June / 2009, 13:42:35
My camera is a sx10 and is the version is 1.0.3.0.
Is there a chdk for this version?
1.0.3.0 is not the "real" firmware version, most likely your "real" version 1.03A...CHDK wikia: FAQ...fw version...

So...no, only fw 1.01a, 1.01b and 1.02b is supported by CHDK.
Logged
*

Offline fercanon

  • *
  • 2
Re: Sx10 version 1.0.3.0
« Reply #2 on: 26 / June / 2009, 09:09:38 »
Thanks for the help, check my camera and firmware that gives me is: 1.0.3.0, as directed.
How the future may have the chdk for this firmware?
Logged
*

Offline reyalp

  • ******
  • 14132
Re: Sx10 version 1.0.3.0
« Reply #3 on: 26 / June / 2009, 19:05:22 »
Quote from: fercanon on 26 / June / 2009, 09:09:38
Thanks for the help, check my camera and firmware that gives me is: 1.0.3.0, as directed.
How the future may have the chdk for this firmware?

Please read the FAQ entry fe50 linked carefully. That is NOT the real firmware version.
Logged
Don't forget what the H stands for.
*

Offline glasseye2000

  • *
  • 3
Re: Sx10 version 1.0.3.0
« Reply #4 on: 02 / July / 2009, 22:45:31 »
//
SX10IS & CHDK
I too had the report of "1.0.3.0" initially as my firmware. It may have been a result of a conflict of having both "ver.req AND vers.req installed in the cards root directory. I've cleaned that up, and in fact the camera now reports "GM1.03A" as the other poster suspected.

There is a 1.03A beta in the dump area, but when I attempt to load that binary, the cameras lcd goes blank, the power led remains on, but the camera won't function at all. In fact the camera will not power down with the on/off switch. The battery door must be opened. After that the camera will resume functioning properly, (but without CHDK of course).

Not sure why I can't get it to work the 1.03A binary to load properly. I have a powershot sd630 that I use CHDK in and it loads fine. Use it to get RAW mostly.

Glasseye2000
Logged
*

Offline fe50

  • ******
  • 3152
  • IXUS50 & 860, SX10 Star WARs-Star RAWs
    • fe50
Re: Sx10 version 1.0.3.0
« Reply #5 on: 03 / July / 2009, 01:45:45 »
Hello & welcome, glasseye2000 !

Quote from: glasseye2000 on 02 / July / 2009, 22:45:31
There is a 1.03A beta in the dump area, but when I attempt to load that binary, the cameras lcd goes blank, the power led remains on, but the camera won't function at all. In fact the camera will not power down with the on/off switch. The battery door must be opened. After that the camera will resume functioning properly, (but without CHDK of course).
Not sure why I can't get it to work the 1.03A binary to load properly. I have a powershot sd630 that I use CHDK in and it loads fine. Use it to get RAW mostly.
There's no CHDK available for the SX10 fw 1.03A yet.
A firmware dump is just a copy of the original camera firmware, used for development - you can't do anything with such dump files on your camera !

You have to wait until someone port CHDK to the SX10 1.03A...you can check the SX10 wikia page from time to time...
Logged
*

Offline clivek

  • *
  • 8
Re: Sx10 version 1.0.3.0
« Reply #6 on: 03 / July / 2009, 11:03:48 »
Hello,
I'm new to this forum and have had a similar problem with my SX1 1s. I just bought the camera and it came with canon firmware dated April 15th 2009 I think the version is GM2.01A . The camers just  'freezes' When trying to  install the CHDK (Beta )version for the camera. Is it that the CHDK version currently availble is  for the earlier pre RAW enbled versions of the SX1?
I would really like to be able to shoot longer exposures and perhaps choose DNG raw files format instead of the canon format.
Is it likely that a new CHDK firmware update suitable for my camera will become available in the near future ?  :)
Logged
*

Offline nicupopescu

  • *
  • 2
Re: Sx10 version 1.0.3.0
« Reply #7 on: 05 / July / 2009, 06:23:17 »
On downloads page is no CHDK available for Canon SX 10 fw 1.03A.Can somebody to tell ......when it's possible to have?
10x for your attention
Logged
*

Offline whim

  • ******
  • 2046
  • A495/590/620/630 ixus70/115/220/230/300/870 S95
Re: Sx10 version 1.0.3.0
« Reply #8 on: 05 / July / 2009, 06:32:28 »
@nicupopescu

Welcome to the forum

Please read fe50's reply #5 in this thread (2 posts before yours)

wim

edit: ... and this message: http://chdk.setepontos.com/index.php/topic,3804.msg36279.html#msg36279
« Last Edit: 05 / July / 2009, 07:07:12 by whim »
Logged
*

Offline martinhamersky

  • *
  • 10
Re: Sx10 version 1.0.3.0
« Reply #9 on: 06 / July / 2009, 11:52:06 »
Hi, i have SX10 with Fw ver.1.03a too. If i can help with development or anything tell me how :-)
Logged
Pages: [1] 2   Go Up
« previous next »
 

Related Topics


SimplePortal © 2008-2014, SimplePortal