SX10is and Ricoh CA-1 for remote. - page 3 - General Help and Assistance on using CHDK stable releases - CHDK Forum  

SX10is and Ricoh CA-1 for remote.

  • 39 Replies
  • 13870 Views
Re: SX10is and Ricoh CA-1 for remote.
« Reply #20 on: 25 / July / 2009, 09:13:20 »
Advertisements
and no ALT in upper left. 


There is NO alt upper left, it would be 'USB'.

Was the SDM splashscreen displayed ?

*

Offline Joe M

  • *
  • 19
Re: SX10is and Ricoh CA-1 for remote.
« Reply #21 on: 26 / July / 2009, 21:24:04 »
There was not a SDM splashscreen on my screen, sorry.  I did download it file 3 times and delete the one old file.
If I press the button, the focus will show for a second then gone.  If I press button quickly again, I get the focus screen and it will stay.  I press again and the shutter works.  It looks like that is how it works, it works many times.  Again,, I thank you for your help and your knowledge.
Joe

Re: SX10is and Ricoh CA-1 for remote.
« Reply #22 on: 27 / July / 2009, 04:39:21 »
Press the ALT button to display the menu.

What are the first five menu titles ?

*

Offline Joe M

  • *
  • 19
Re: SX10is and Ricoh CA-1 for remote.
« Reply #23 on: 27 / July / 2009, 16:16:41 »
1. Extra Photo Op
2. Video Parameters
3. Raw parameters
4. Edge overlar
5. Histogram parameters


Re: SX10is and Ricoh CA-1 for remote.
« Reply #24 on: 27 / July / 2009, 16:48:28 »
This is what I suspected.
Nothing works because you are not using the file I gave you the link for.
I have no idea how you can do that.

I suggest that you delete all files  and install the SDM  DISKBOOT.BIN .

We cannot do anything until you use the correct file.


david


*

Offline Joe M

  • *
  • 19
Re: SX10is and Ricoh CA-1 for remote.
« Reply #25 on: 27 / July / 2009, 17:57:45 »
David, I cleaned off the card, reformatted the card. Downloaded the chdk again but before I loaded everything I loaded your DISKBOOT.BIN again.  I then loaded the chdk to the card.  I did not allow the original DISKBOOT.BIN to come over to the card.  I now have a new setup on the card.  I think that the .BIN file is the same as the one I had.  The files are the same as when I send the 1/2 hour ago.

We cannot do anything until you use the correct file.             what else can I do.
Joe M 

Re: SX10is and Ricoh CA-1 for remote.
« Reply #26 on: 27 / July / 2009, 18:09:11 »
Joem,

PLEASE do not load CHDK, just load the single file I have given you the link for.

David
« Last Edit: 27 / July / 2009, 19:42:35 by Microfunguy »

Re: SX10is and Ricoh CA-1 for remote.
« Reply #27 on: 28 / July / 2009, 07:17:51 »
Just to be clear .. you must have a bootable card and it should only contain the file I gave you a link for.
If you have formatted a card, make it bootable using your normal method, delete all files and copy just the one file I gave you the link for.

Boot the camera and tell me the first five menu headings.


David


*

Offline Joe M

  • *
  • 19
Re: SX10is and Ricoh CA-1 for remote.
« Reply #28 on: 28 / July / 2009, 09:47:39 »
David, I have formatted the card, make it bootable using CDHK, delete all files and copy just the one file you gave me the link for.  I did that and nothing came up, CHDK did not work.   I had to put back the files the CHDK needed.  I did that and put back in the DISKBOOT.BIN.  I know that it is the you sent me, I downloaded 2 of them, DISKBOOT.BIN(2) and DISKBOOT.BIN(3).  I made sure the file I copied was DISKBO0T.BIN(2).   I then renamed the file to DISKBOOT.BIN.  I then looked at the menu and it is the same.     
David, I wanted to have the remote work, and I applaud your help, but I feel that the .BIN file is not what you thing it is.  This is where the C:\Users\Owner\Downloads file is found. It is downloads. 
I feel we are done, thank you for your efforts.
Joe M 

Re: SX10is and Ricoh CA-1 for remote.
« Reply #29 on: 28 / July / 2009, 10:28:25 »
I downloaded 2 of them, DISKBOOT.BIN(2) and DISKBOOT.BIN(3).

I think I know what is happening.
ZShare is renaming a number of files, they could be for any camera.

I have therefore zipped it, this will be correct :-

http://www.zshare.net/download/63278541490680ee/


David

 

Related Topics


SimplePortal 2.3.6 © 2008-2014, SimplePortal