SX200is Porting - page 8 - DryOS Development - CHDK Forum

SX200is Porting

  • 1105 Replies
  • 577465 Views
*

Offline OldGit

  • ****
  • 303
Re: SX200is Porting
« Reply #70 on: 26 / August / 2009, 01:07:34 »
Advertisements
smartkiller,
did you format the card, make bootable etc.

If you build for the PS.Fi2 option you could always try the Firmware Option as well.
NOTE that this option will requires the encoding keys.

let us know how you get on.
SX200 IS-100C

*

Offline OldGit

  • ****
  • 303
Re: SX200is Porting
« Reply #71 on: 26 / August / 2009, 01:09:06 »
And another thought,
Make sure you DO NOT have OPT_DEBUGGING on, this will stop the camera.
OldGit
SX200 IS-100C

Re: SX200is Porting
« Reply #72 on: 26 / August / 2009, 01:32:40 »
smartkiller,
did you format the card, make bootable etc.

If you build for the PS.Fi2 option you could always try the Firmware Option as well.
NOTE that this option will requires the encoding keys.

let us know how you get on.

Yes the Card was formatted and bootable.
OPT_Debugging was off.
But what are the encoding Keys? Infos in the Wiki are for Insiders.
Must i wait for a ready Build or porting in the Trunk?

Smartkiller
SX200 IS Firm. 100c
SX1 IS Firm. 201a

*

Offline fe50

  • ******
  • 3152
  • IXUS50 & 860, SX10 Star WARs-Star RAWs
    • fe50
Re: SX200is Porting
« Reply #73 on: 26 / August / 2009, 01:41:23 »
But what are the encoding Keys? Infos in the Wiki are for Insiders.
Must i wait for a ready Build or porting in the Trunk?
See http://chdk.setepontos.com/index.php/topic,2995.0.html
You can encode your diskboot.bin directly with ewavr's fi2encdec tool...

Re: SX200is Porting
« Reply #74 on: 26 / August / 2009, 10:41:47 »
Hallo I usesd the fi2encdec tool and have now a ps.fi2 file with my cam id. But when i start the Cam Firmware update, the Cam says Firmware error.

What the things for the fi2.inc ? So that i turn on the OPT_FI2.

 :( :( :(

Must i wait for a ready CHDK for my cam?
Smartkiller
« Last Edit: 26 / August / 2009, 10:46:18 by smartkiller »
SX200 IS Firm. 100c
SX1 IS Firm. 201a

*

Offline OldGit

  • ****
  • 303
Re: SX200is Porting
« Reply #75 on: 26 / August / 2009, 11:29:57 »
Smartkiller,
I am at work now but I can post the compiled versions of both files later tonight.

You should note that this software is NOT tested and is known to have problems, it is mainly for other developers to see the source code.

If you just want to take a look then thats OK but you may be better waiting for at least a beta test version.
OldGit
SX200 IS-100C

Re: SX200is Porting
« Reply #76 on: 26 / August / 2009, 11:35:20 »
Thanks for the work.
I have now a ps.fi2 file that starts. (in pack.bat setting -sys to G10)
But the Cam makes nothing after the Firmwareupdate. The SD Card in my Cam starts only with the write protect tab disabled. If i protect the card, the cam makes nothing.

Smartkiller

P.S. My cam has Firmware 1.0C
« Last Edit: 26 / August / 2009, 12:19:27 by smartkiller »
SX200 IS Firm. 100c
SX1 IS Firm. 201a

*

Offline OldGit

  • ****
  • 303
Re: SX200is Porting
« Reply #77 on: 26 / August / 2009, 14:39:49 »
Smartkiller,
here are the files, they do very little but you are welcome to try them.
OldGit
SX200 IS-100C

Re: SX200is Porting
« Reply #78 on: 27 / August / 2009, 01:06:46 »
Hallo
The Files are OK.
The Cam Firmwareupdate says Update from Firmware 1.0.0.0 to 1.1.0.0

The Cam is now booting with that files, and shows a very small Picture.
This is so small, that i cant Read the Text.
Is there any Funktions from the CHDK inside?



Smartkiller
« Last Edit: 27 / August / 2009, 01:18:33 by smartkiller »
SX200 IS Firm. 100c
SX1 IS Firm. 201a

*

Offline OldGit

  • ****
  • 303
Re: SX200is Porting
« Reply #79 on: 27 / August / 2009, 02:27:37 »
The Cam is now booting with that files, and shows a very small Picture.
This is so small, that i cant Read the Text.
Is there any Funktions from the CHDK inside?
Hi,
the problem with the splash being very small is a know issue.
I hope to get time this weekend to do some debugging and fixes, this will be one of them.
The functions are not useable at present, I need to get the splash (and other display functions) debuged first.
Then the buttons and "card locked" problem need fixing.

Hopefuly this can done soon and then we can start to debug functions.
OldGit
SX200 IS-100C

 

Related Topics


SimplePortal © 2008-2014, SimplePortal