SX200is Porting - page 109 - DryOS Development - CHDK Forum
« previous next »
Pages: 1 ... 104 105 106 107 108 [109] 110 111   Go Down

SX200is Porting

  • 1105 Replies
  • 586067 Views
*

Offline xartzmax

  • *
  • 8
Re: SX200is Porting
« Reply #1080 on: 17 / October / 2010, 04:29:14 »
Advertisements
Quote from: xartzmax on 16 / October / 2010, 09:39:25
I have a Canon SX200 IS with 1.00D Firmware. And loaded "sx200is-100d-0.9.9-955-full".
But it says 100C in the pop up image at the startup.

Is this normal or is something wrong?

The above mentioned CHDK gives other problems such as appearing green ghosting when the shutter is half pressed and zooming out all the way back sometimes when shooting videos. I m going to stop using the CHDK unless someone say it's normal for the current version of CHDK for SX200 IS or give a link to a more stable version.

Thank you....
Logged
*

Offline fe50

  • ******
  • 3152
  • IXUS50 & 860, SX10 Star WARs-Star RAWs
    • fe50
Re: SX200is Porting
« Reply #1081 on: 17 / October / 2010, 05:15:10 »
Quote from: xartzmax on 17 / October / 2010, 04:29:14
The above mentioned CHDK gives other problems such as appearing green ghosting when the shutter is half pressed and zooming out all the way back sometimes when shooting videos.

It seems as if the "Edge Overlay" feaure is enabled; delete the CHDK config file \CHDK\cchdk.cfg & try again...
Logged
*

Offline xartzmax

  • *
  • 8
Re: SX200is Porting
« Reply #1082 on: 20 / October / 2010, 12:39:11 »
Quote from: fe50 on 17 / October / 2010, 05:15:10
Quote from: xartzmax on 17 / October / 2010, 04:29:14
The above mentioned CHDK gives other problems such as appearing green ghosting when the shutter is half pressed and zooming out all the way back sometimes when shooting videos.

It seems as if the "Edge Overlay" feaure is enabled; delete the CHDK config file \CHDK\cchdk.cfg & try again...

Thanks Again .... :)
Logged
*

Offline Marcio Lima

  • *
  • 37
Re: SX200is Porting
« Reply #1083 on: 22 / November / 2010, 07:51:53 »
I would like to write a LUA script to set the brigtness and contrast in sx200. Can anybody help me ?
Logged
*

Offline melli182

  • *
  • 13
Re: SX200is Porting
« Reply #1084 on: 03 / June / 2011, 15:09:59 »
Hello everybody...

I got a question... Could it be possible to take remote pictures with the pc from the SX200 IS and have a reali time live view in the pc monitor???

Thanks in advace!!!
Logged
*

Offline reyalp

  • ******
  • 14137
Re: SX200is Porting
« Reply #1085 on: 03 / June / 2011, 21:29:53 »
Quote from: melli182 on 03 / June / 2011, 15:09:59
Hello everybody...

I got a question... Could it be possible to take remote pictures with the pc from the SX200 IS and have a reali time live view in the pc monitor???

Thanks in advace!!!
If your question is about doing this with CHDK, we've already answered it several times. Since it is not possible in general, you don't need to ask for each camera! Asking again will not change the facts.

If you mean using canons own software, you should check canons documentation. The canon SDK page http://usa.canon.com/cusa/consumer/standard_display/sdk_homepage has a convenient table showing which cameras support which Canon SDK features.
Logged
Don't forget what the H stands for.
*

Offline tkgafs

  • *
  • 18
Re: SX200is Porting
« Reply #1086 on: 27 / July / 2011, 08:34:08 »
Hello,

I am looking for a way to fit a polarising filter to the sx200 and came across the following item on Amazon.com

http://www.amazon.com/Diameter-PowerShot-SX-210IS-auxiliary-Microfiber/dp/B0049CU1ZO

it is for a SX210 and SX210IS, but does anyone know if it will fit the SX200IS

I presume it works by slipping round the lens mount which sticks out from the camera body

it says it is 58mm, but I dont know if the lens mount on an sx210 is slightly bigger than an sx200,

as on my SX200 I measure the lens mount to be about 54.5mm, but I dont know the dimensions of the SX210

anybody got access to one they could measure

thanks for any help

Tkgafs
Logged
*

Offline mastodon

  • **
  • 93
Re: SX200is Porting
« Reply #1087 on: 27 / July / 2011, 10:59:25 »
That's a damn good adapter! Maybe you might measure an SX 210 with a caliper in a big market. ;)
Logged
(A 410), SX 200, (SX 280), SX 700
*

Offline CanonBlue

  • ***
  • 153
    • My Flickr Page
Re: SX200is Porting
« Reply #1088 on: 30 / July / 2011, 10:18:21 »
Hi, I'm considering buying an SX200. I notice that it says the CHDK is available for SX200s with certain firmware versions but not others. If I'm buying a camera, e.g. from Amazon or even from a physical store, is there a way to tell the firmware version before I buy it? I would hate to buy one and find out the CHDK doesn't work because of bad luck with getting firmware version a instead of d. (I'm sorry if this has already been answered, but I did search for it in the forums and didn't find anything.)

That adapter thing looks awesome, btw. If you figure out if it works for this camera, let us know.

I was actually considering getting the SX230 because it has a better zoom, but it doesn't seem to have the chdk (yet?) and that is more important to me.
Logged
My Flickr Page
I use the chdk on my SX230 and SD1100 cameras, and I installed them using a Macbook, currently running 10.6.8.
*

Offline Microfunguy

  • ****
  • 4037
    • StereoData Maker
Re: SX200is Porting
« Reply #1089 on: 30 / July / 2011, 10:29:54 »
Quote from: CanonBlue on 30 / July / 2011, 10:18:21
If I'm buying a camera, e.g. from Amazon or even from a physical store, is there a way to tell the firmware version before I buy it?

If you or the seller can take a photo with it then yes ....  http://www.zenoshrdlu.com/acid/acid.html
Logged
Pages: 1 ... 104 105 106 107 108 [109] 110 111   Go Up
« previous next »
 

Related Topics


SimplePortal © 2008-2014, SimplePortal