IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread - page 46 - General Discussion and Assistance - CHDK Forum

IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread

  • 678 Replies
  • 290111 Views
Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #450 on: 28 / March / 2010, 20:33:49 »
Advertisements
Quote
after I finish the FW dumping research

Jason, is dumping 1.00b FW in your plans?  ???

Thanks in advance.-
« Last Edit: 28 / March / 2010, 23:17:43 by gonzalito »

Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #451 on: 29 / March / 2010, 11:21:07 »
Plans? - Yes  Will i succeed who knows.  I don't own a 1.00b fw camera so I am trying to find a way for udump to work on my 1.00c so that I can give it to a 1.00b owner.
Canon Models - SD300, SD780, & SX210

Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #452 on: 29 / March / 2010, 21:05:16 »
Great, Jason... Count on me to test it on my 1.00b camera... And thanks again for your effort and dedication... Regards!

Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #453 on: 30 / March / 2010, 21:53:49 »
I have been trying to get the remote USB feature to work on this camera with no avail.  Remote is enabled in the CHDK software.  I have tried a few different scripts. I have tried 3 volts, 4.6 volts, and 5 volts directly from a USB port.  I am positive my wiring is correct according to the wiki diagram (using the red and black wires with the correct polarity).  Is there something I am missing?  Is there a certain script that others know work?  This is a feature I am very interested in and I am not sure where to go from here.   

Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #454 on: 30 / March / 2010, 23:03:45 »
I would be very surprised if it worked.  You might try the SDM build of microfunguy I beleive he cleaned up the sd780 for his build.  I however have never tested usb remote on the sd780 and would be surprised if it worked yet. 
Canon Models - SD300, SD780, & SX210

Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #455 on: 31 / March / 2010, 00:23:42 »
Ah, ok.  This makes a lot more sense now.  I did read his posts about it "working" but didn't fully realize it was a separate build.  Well, for the record, it doesn't seem to work.  ;)  No rush.   I will wait on building my cable and wireless remotes until I know what kind of voltage it wants to see though I could assume that his build would work the same way voltage level wise. 

In any case, thank you for your effort on this project.  I feel like my camera has super powers with just the beta.   

*

Offline fvdk

  • ***
  • 146
  • Ixus 70 1.01b / 1.02a & Powershot A590is 1.01b
    • My Flickr photo page
Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #456 on: 01 / April / 2010, 03:10:10 »
I would be very surprised if it worked.  You might try the SDM build of microfunguy I beleive he cleaned up the sd780 for his build.  I however have never tested usb remote on the sd780 and would be surprised if it worked yet. 

Yes, with SDM the USB remote works perfectly.

Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #457 on: 02 / April / 2010, 14:40:01 »
I would be very surprised if it worked.  You might try the SDM build   


Jason,

#define USB_MASK (0x80000)

Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #458 on: 02 / April / 2010, 16:20:46 »
LOL.  I'll make that change.
Canon Models - SD300, SD780, & SX210

Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #459 on: 02 / April / 2010, 22:07:00 »

 

Related Topics


SimplePortal © 2008-2014, SimplePortal