IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread - page 57 - General Discussion and Assistance - CHDK Forum supplierdeeply

IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread

  • 678 Replies
  • 213523 Views
Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #560 on: 05 / August / 2010, 02:44:00 »
Advertisements
On holiday ATM but when I return I will add that to my long list of required fixes.

Harpo
Canon Models - SD300, SD780, & SX210

Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #561 on: 05 / August / 2010, 12:25:26 »
Hello HarpoMa,
I too would love to see a 1.00b Port for the SD780is. The work you did for the 1.00c and the features look completely incredible. Are the b and c firmware dumps very dissimilar?

skywagon

Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #562 on: 12 / August / 2010, 08:03:59 »
Hello HarpoMa,
I too would love to see a 1.00b Port for the SD780is. The work you did for the 1.00c and the features look completely incredible. Are the b and c firmware dumps very dissimilar?

skywagon
I just popped back in to see if there was any update on 1.00b, but I guess not.

Is that just not going to happen?

Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #563 on: 28 / August / 2010, 13:41:18 »
Hi all,
i'm a very newbie and i read few post yet; anyway...

I loaded CHDK on my Powershot Sd780/Ixus100is.

I notice that:
1) CRW files saved (18.653.760 byte each, or 17,7mb) are empty, i mean blank, no pixel, no image, then picture browsers say 0.00 pixel and show black screen.
2) no able to run the script "badpixel.lua" needed for saving in DNG.

- I loaded CHDK through CardTricks on 4gb and 128mb card formatted in FAT16 but it happens the same.
- Version of my camera firmware is 100c (GM 1.00c), as requested.
- Version of CHDK is 0.9.9-926 ("ixus100_sd780-100c-0.9.9-926-full_BETA.zip").

What have i done wrong?
Thank you in advance for any advice you can give me,

Leo

(PS. congrats to guys that made this great device!)


*

Offline fe50

  • ******
  • 3134
  • IXUS50 & 860, SX10 Star WARs-Star RAWs
    • fe50
Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #564 on: 29 / August / 2010, 04:31:36 »
1) CRW files saved (18.653.760 byte each, or 17,7mb) are empty, i mean blank, no pixel, no image, then picture browsers say 0.00 pixel and show black screen.
To view CHDK RAW images the viewer must support them, most viewers/apps do not work directly with CHDK RAWs...
--> Read the sticky threads in the RAW Shooting and Processing section
--> Try other programs, e.g. DCRAW-based ones; maybe XNView, RawTherapee or Picasa can open the SD780's RAWs.

Quote
2) no able to run the script "badpixel.lua" needed for saving in DNG.
You should be a bit more precise - what does not work, do you get an error message ?

Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #565 on: 29 / August / 2010, 22:55:42 »
Hello fe50, thank you so much for reply me.
I read various wiki stuff and posts related to my topics in the section you linked to me, then i tried to apply suggestions but nothing fixed...
Now i am just able to see my empty raw files also in camera as "not identified images".
I did set RAW as IMG_xxx.CR2, CRW_xxx.CRW and other combinations, setting even in and out jpg directory.
Then i tested DNG4PS2, FastStone, XnView, Picasa and maybe other browsers: no way; always the same pictures (almost 18mb each) with no pixels.
Moreover i did follow your post about running the badpixel script but the only result is to wait a while and notice to having shoot twice (an overexposed jpg and a blank/black CR2); i figure that plugin for DNG doesn't load until the basic RAW will work correctly (by my sensation).
Do you think i can do something more?
Many thanks - Leo
(ps. i hope to be enough clear despite english is not my language)


Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #566 on: 03 / September / 2010, 16:36:40 »
Hello,

I am trying to get CHDK to work on my 4gb memory card. The files load onto the card just fine and the camera recognizes the firmware (or at least the splash image shows up), but the lens does not zoom out and the camera sits in the image review mode with "No image" on screen. Any ideas on what I am doing wrong?

I'm currently using OS X 10.6.4 and used SDMInst with the latest build.

EDIT: After tinkering around I discovered that CHDK is indeed working, as I was able to navigate the menus, yet the camera refuses to enter Record mode.
« Last Edit: 03 / September / 2010, 16:40:54 by firequall »

Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #567 on: 04 / September / 2010, 11:13:11 »


Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #568 on: 06 / September / 2010, 09:14:24 »
Hi firequall. In reply to your question, on my SD780IS camera with CHDK after you turn the camera on with the power button it goes into review mode. You then have to press the shutter button down to get the camera to pop out the lens and switch to record mode.

Andrew


Hello,

I am trying to get CHDK to work on my 4gb memory card. The files load onto the card just fine and the camera recognizes the firmware (or at least the splash image shows up), but the lens does not zoom out and the camera sits in the image review mode with "No image" on screen. Any ideas on what I am doing wrong?

I'm currently using OS X 10.6.4 and used SDMInst with the latest build.

EDIT: After tinkering around I discovered that CHDK is indeed working, as I was able to navigate the menus, yet the camera refuses to enter Record mode.
Canon SD780IS

Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #569 on: 07 / September / 2010, 11:06:08 »
Hi folks,

I don't know if this was mentioned before, but I get some strange behaviour.
When CHDK is loaded and I try to take a picture the camera shuts down sometimes. No picture is taken.
Other CHDK stuff seems to work properly, like intervalometer scripts, which take photos without shutting down.

Is this a bug or am I doing something wrong?

 

Related Topics