IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread - page 8 - General Discussion and Assistance - CHDK Forum
« previous next »
Pages: 1 ... 3 4 5 6 7 [8] 9 10 11 12 13 ... 68   Go Down

IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread

  • 678 Replies
  • 234461 Views
*

Offline HarpoMa

  • ***
  • 218
Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #70 on: 19 / September / 2009, 23:46:35 »
Advertisements
The current source is not upto date.  Just use the PS.FI2 for now...

Harpo

Quote from: mstawick on 19 / September / 2009, 17:44:20
I will start testing on thursday, as soon as my camera gets back to me. If I manage to build this ;/

Right now I'm getting:
-> main.elf
../platform/ixus100_sd780/libplatform.a: could not read symbols: File format not recognized
collect2: ld returned 1 exit status
make[1]: *** [main.elf] Error 1
make: *** [all-recursive] Error 1

I'm building with:
gcc (Ubuntu 4.3.3-5ubuntu4) 4.3.3

Any help appreciated. Also, if someone could send me pre-built package, this would be cool. Thanks!
Logged
Canon Models - SD300, SD780, & SX210
*

Offline mstawick

  • *
  • 18
Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #71 on: 20 / September / 2009, 03:15:18 »
OK, thanks for support. BTW, I finally managed to build it under Windows using chdk-shell.
Logged
*

Offline Duke

  • *
  • 2
Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #72 on: 21 / September / 2009, 12:58:52 »
Hi, I've been following this thread since the first post, and registered just now to help testing, although i'm new to CHDK and have never used it before. But i bought the Ixus 100 having in mind that someone would hopefully make a port.
And HarpoMa, you did a great job so far. Thx for that!  :D

Since i'm new to CHDK i'm just getting started, but there are 2 issues i noticed so far:

  • Not possible to switch between original canon modes auto and program while CHDK is loaded
  • Exif data is not correct when using overrides

But i'm sure you are aware of that. ;)

Looking forward get myself into scripting, but i have not tested that yet, cause you haven't touched that by now, as stated in your first post.


Great work so far, keep going. :)
Logged
*

Offline HarpoMa

  • ***
  • 218
Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #73 on: 21 / September / 2009, 13:17:12 »
@Duke,

Feel free to try anything.  I haven't specifically touched scripting but that doesn't mean it doesn't work.  Lots of area is generic and works once the base port is working.  If you do end up testing it just edit your original post and I'll watch for any changes.

Harpo
Logged
Canon Models - SD300, SD780, & SX210
*

Offline quikee

  • *
  • 7
Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #74 on: 21 / September / 2009, 14:10:59 »
Issues I found:
  • If "fast Ev switch" is enabled the Ev switching is bound to the same values as self timer (down).
  • Self timer is not recognized as continuous mode which makes it unusable for bracketing.
  • Could not get badpixel removal to work. I have a bad pixel and used badpixel file to set the coordinates of the pixel using DNG to determine the coordinate in an (raw) image editor.
  • Remaining video time in video mode is not shown if enabled.

This is for now...
Logged
*

Offline Jensemann

  • *
  • 6
Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #75 on: 21 / September / 2009, 16:37:33 »
Two more (small?) issues:
- in video mode the AF Key doesn't work (I thought it did on my first test...)
- CHDK menu exits if cam autofocus detects something

But still I'm absolutely impressed by your great work Harpo! :-) *bow down*

Jens
Logged
*

Offline kaplanfx

  • *
  • 4
Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #76 on: 21 / September / 2009, 23:24:07 »
I was able to successfully load alpha V5, I'll put bugs here.

-kap
Logged
*

Offline mstawick

  • *
  • 18
Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #77 on: 22 / September / 2009, 07:33:58 »
Bug list:
=====
No new ones.

These were copied by HarpoMa to the summary, so I 'removed' them:
* Cannot open RAW (even in IrfanView),
* Cannot open DNG in LightRoom, Photoshop; IrfanView opens,
* Menu sometimes dissappears (even in 'P' mode, when camera doesn't autofocus); i'm not sure exactly at what conditions this happens,
* The camera (canon-generic OSD while taking the shot) shows fastest time as 1/1500 (even if override is set higher) and the highest ISO as 8000 (same gets written in EXIF). I have compared shots taken with ISO8000 and ISO1600 - no difference. I don't know what to think about it. Either the real highest ISO is like 1600 or something doesn't quite work with override. Sorry if I have written something totally retarded,
* In "shutterspeed enum type" = "Factor" the longest time is 15". In "Ev step" is 64". Is this correct? I was hoping for longer,
* Bracketing doesn't work with custom timer. It does work with manual continuous shooting same as quikee (2),
* SUGGESTION perhaps Ev quick switching would be better with zoom-in / zoom-out controls with alt active; also navigation through menu would be easier with zoom-keys, or is it only me?
« Last Edit: 24 / September / 2009, 14:32:20 by mstawick »
Logged
*

Offline Jestik

  • *
  • 11
Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #78 on: 22 / September / 2009, 08:07:35 »
i've never used canons and i'm very happy with chdk! Thanks you for your job.
I found a bug. When i make movie and use optical zoom, after 3.0x (when digital zoom comes) i can't bring it back to 1.0x  -it just stops ant 3.0x
Logged
*

Offline drakon

  • *
  • 10
Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #79 on: 22 / September / 2009, 12:07:48 »
it's possible av overrides in ixus100 with chdk??
Logged
Pages: 1 ... 3 4 5 6 7 [8] 9 10 11 12 13 ... 68   Go Up
« previous next »
 

Related Topics