IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread - page 68 - General Discussion and Assistance - CHDK Forum
« previous next »
Pages: 1 ... 63 64 65 66 67 [68]   Go Down

IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread

  • 678 Replies
  • 285038 Views
*

Offline Microfunguy

  • ****
  • 4037
    • StereoData Maker
Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #670 on: 18 / June / 2013, 18:52:33 »
Advertisements
Quote from: waterwingz on 18 / June / 2013, 16:58:21
This is probably in the wrong thread

Sorry, I forgot to mention, this specifically refers to the IXUS100.

A user said neither the SDM or CHDK versions worked like that.

If so, either the ram address is incorrect or that article is incorrect.
Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #671 on: 18 / June / 2013, 21:03:36 »
Quote from: Microfunguy on 18 / June / 2013, 18:52:33
Quote from: waterwingz on 18 / June / 2013, 16:58:21
This is probably in the wrong thread
Sorry, I forgot to mention, this specifically refers to the IXUS100.
A user said neither the SDM or CHDK versions worked like that.
If so, either the ram address is incorrect or that article is incorrect.
Easy enough to check - ask your user to take two 30 second exposures - one with dark frame on and the other with dark frame off.  Observe whether the total save time is 60 seconds or 30 and you'll know if they have hooked the right address in capt_seq.c   I assume that the SDM code for capt_seq.c  is just lifted from the CHDK port so results should be the same.
« Last Edit: 18 / June / 2013, 21:06:14 by waterwingz »
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #672 on: 23 / June / 2013, 13:58:31 »
Quote from: Microfunguy on 18 / June / 2013, 18:52:33
If so, either the ram address is incorrect or that article is incorrect.
The RAM address is fine but the hook in capt_seq.c is commented out for both firmware versions.   

Also, "wait_until_remote_button_is_released()" is also commented out so precision sync is not possible with this camera.

I just posted to this effect in the SDM Yahoo group - if your user wants it fixed he/she will need to come here and help with the testing.
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline muelli

  • *
  • 2
Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #673 on: 23 / June / 2013, 14:18:28 »
Quote from: waterwingz on 23 / June / 2013, 13:58:31
if your user wants it fixed he/she will need to come here and help with the testing.

Here I am, and surely I will help with the testing ;-)!

Best regards und thank you for your support,
Christoph
« Last Edit: 23 / June / 2013, 14:29:22 by muelli »
Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #674 on: 23 / June / 2013, 14:34:46 »
Quote from: muelli on 23 / June / 2013, 14:18:28
Here I am, and surely I will help with the testing ;-)!
Welcome.   Anticipating your arrival, I took a look at some comparable ports to the IXUS100.  The D10 has the same hooks as the IXUS100 in the same place but they are not commented out.  So we would be pretty safe to try that.

Here's both firmware versions for CHDK 1.2.0  - SD card lock booting only.

100b> https://www.box.com/s/bruj531up48y31oiup7f
100c> https://www.box.com/s/mrddiduz06m3p5aa38m6

You can check the noise reduction by shooting for 10 seconds with it Off and On.  With it On, you should get a 20 second shooting time, with it Off you should get 10 seconds.

You can check the USB remote precision sync by inserting a long sync delay and observing if the shutter delays firing after the remote is released for that amount of time.


Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline muelli

  • *
  • 2
Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #675 on: 23 / June / 2013, 15:47:00 »
Thank you! For firmware 100C the dark frame reduction works. If I activate it, the camera processes 10 seconds after 10 seconds shutter time and removes all the hotpixel. The other function seems to work, too; I had set the delay to 3 seconds.

Best regards,
Christoph
Logged
*

Offline nafraf

  • *****
  • 1308
Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #676 on: 12 / December / 2014, 08:15:19 »
Patch to correct keyboard behavior, errors were reported here.
- Set KEY_PLAYBACK as default ALT key, KEY_DISPLAY as the second option
- Remove KEY_POWER from KEYMASK1
Logged
*

Offline koshy

  • *****
  • 1096
Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #677 on: 14 / December / 2014, 21:11:14 »
Quote from: nafraf on 12 / December / 2014, 08:15:19
Patch to correct keyboard behavior, errors were reported here.
- Set KEY_PLAYBACK as default ALT key, KEY_DISPLAY as the second option
- Remove KEY_POWER from KEYMASK1
Tested to be working fine. Play is ALT key now and I can power the cam off while in ALT mode. Thanks.
Logged
Koshy had a little ELPH which wasn't white as snow but everywhere that Koshy went the ELPH was sure to go. (actually an SD, but that detail ruins the rhyme...)
*

Offline nafraf

  • *****
  • 1308
Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #678 on: 15 / December / 2014, 06:14:31 »
Thanks. Changes committed to trunk, changeset 3799
Logged
Pages: 1 ... 63 64 65 66 67 [68]   Go Up
« previous next »
 

Related Topics


SimplePortal © 2008-2014, SimplePortal