IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread - page 61 - General Discussion and Assistance - CHDK Forum

IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread

  • 678 Replies
  • 213309 Views
Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #600 on: 06 / December / 2010, 13:55:20 »
Advertisements
I've been using CHDK on my SD780 for quite a while, and have been mostly pleased with everything it's been able to do for me.

However, after testing CHDK on at least two, probably three SD780s, I haven't yet found one able to use CHDK's manual focus setting. When the subject distance value is set, it used to crash the camera, but now it simply focuses as it would normally. I've tried this with Subject Distance bracketing, as well as simply setting the subject distance, but I haven't yet captured a picture with CHDK and this camera with the focus set as I wanted it.

This really is annoying...is something being done about it, am I the only one experiencing this problem, or is this new to you people?


!Noah!

Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #601 on: 08 / December / 2010, 11:27:46 »
I have been using it for two months or so and so far its really great.

I have some problems though
- I can't get an exposure past 1/1500 or 15 seconds
- I can't get auto boot to work (Some help on this would be much appreciated)

Is there a max card size for auto boot I have a 4GB and a 16GB, both work with CDHK
« Last Edit: 10 / December / 2010, 15:08:07 by Wiggleschan »

Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #602 on: 20 / December / 2010, 10:47:00 »

Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #603 on: 03 / February / 2011, 18:17:51 »
Hello,

I have the same issue as Flutterbudget.
When I use focusing on my IXUS 100 IS camera crashed.
I've tried reinstall CHDK but issue wasn't fixed.

Most of all other features works fine.

Is somebody has this issue? / How it can be fixed?


*

Offline DFA

  • *
  • 3
Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #604 on: 26 / March / 2011, 07:28:10 »
« Last Edit: 26 / March / 2011, 07:30:50 by DFA »

*

Offline reyalp

  • ******
  • 13450
Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #605 on: 26 / March / 2011, 15:32:18 »
Don't forget what the H stands for.

Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #606 on: 04 / May / 2011, 14:18:53 »
Ok I've just recently tried CHDK out after finding out I can use >4GB after all with the partition swap method, looks to be pretty handy for those of us with a IXUS100.

Id like a little help though, so I should say Im a complete novice really when it comes to cameras but tech minded.

Ok so a few questions if anyone could answer them for me :) :

1) How do I change shooting modes when not in playback mode?

2) With "Video Mode" set to quality every attempt has resulted in a 2 second vid(stops recording by itself), is there something I'm missing or is it a known issue?

--"Default" seems to work fine.

3) Is there anything I can do to reduce noise on indoor videos? Im not expecting crystal clear but I seem to get alot more noise on mine than most other indoor examples I've seen on this camera, could my particular camera be getting hot too quick or something?

--Daytime/outdoor videos look as good as I expected(again from examples I've seen elsewhere).
« Last Edit: 04 / May / 2011, 14:20:53 by Metalartin »

Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #607 on: 03 / July / 2011, 10:05:30 »
Canon SD780 (Ixus 100 IS) - FW 1.00B


*

Offline Benoe

  • *
  • 12
Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #608 on: 07 / July / 2011, 07:34:26 »

Re: IXUS 100 IS (Europe) / PowerShot SD780 IS - Porting Thread
« Reply #609 on: 12 / July / 2011, 18:44:19 »

 

Related Topics