Solved the problems with `continuous shooting' in all circumstances, so no problems
for all ISO levels, if using RAW or not, it all works without trigger delay at all (one caveat:
on my camera). Just added the complementary test with propcase 205/206.
Here it is.
@title MD LightningB
@param a Columns
@default a 6
@param b Rows
@default b 4
@param c Threshold (0-255)
@default c 10
@param d Compare Interval (ms)
@default d 0
@param e Trigger Delay (0.1 s)
@default e 0
@param f Time-out Period (s)
@default f 3600
@param g Pix-Step(speed/accuracy adj)
@default g 6
@param h Measure Mode(1-Y 0-U 2-V)
@default h 1
@param i Direct Shoot (0=N 1=Y)
@default i 1
print " compare interval",d
print " trigger delay ",e
print " direct shoot ",i
e=e*100
f=f*1000
while 1
press "shoot_half"
rem use 205 for DigiII
do
get_prop 206 p
until p=1
md_detect_motion a, b, h, f, d, c, 1, t, 0, 1, 1, a, b, i, g, e
if i=0 then click "shoot_full"
rem the next loop is endless if AE lock is activated, use 205 for DigiII
do
get_prop 206 p
until p<>1
wend
end
Also cleaned up some of the parameters and printed those that are of relevance
for time from detection to shot. The other parameters do not influence this time.
Now it only remains to be seen if this 3 buffer idea can be implemented in a way
that does improve timing, which is not the case at the moment.
Edit: corrected typo in script
