Udumper code, can someone please explain it?

RaduP

890

Udumper code, can someone please explain it?

« on: 16 / August / 2009, 18:15:30 »

Advertisements

#define MIN_ADDRESS     0xFF810000
#define FW_SIZE         0x400000

#define START_SECTOR    2048


typedef int (*f_w)(int, int, int, int); // drive(?), start sector, number of sectors, address
 
int main() {
 int i;
 unsigned long sa;
        f_w wr;

   for (i=0x1900;i<0xF0000;i+=4)
    if ((*(unsigned int*)(i+0x34)==0) &&
        (*(unsigned int*)(i+0x38)==0) &&
        (*(unsigned int*)(i+0x3C)==3) &&
        (*(unsigned int*)(i+0x4C)>MIN_ADDRESS) &&
        (*(unsigned int*)(i+0x50)>MIN_ADDRESS) ) {

  wr=(f_w)*(unsigned int*)(i+0x50);

              #if defined (DRYOS)
                // #warning DRYOS
                // jeff666: fill some memory with zeroes; "simulate" large diskboot
                // WARNING: the starting address is a guess

  for (i = 0x1c00; i<0x30000; i+=4)  *(int*)i=0;

              #elif defined (VXWORKS) 
             // #warning VXWORKS
              #else
                #error OS type must be defined
              #endif

                sa=(unsigned long)wr>0xFFC00000 ? 0xFFC00000 : 0xFF810000;

  wr(0, START_SECTOR, FW_SIZE/512, sa);
 }
 
 while(1);
 return 0;
}

I understand that it writes a raw stream of data, no FAT and stuff, and that the big empty file is supposed to catch the data (assuming that sectors are consecutive).
But I do not understand how it does so.

For example, I am totally confused by: typedef int (*f_w)(int, int, int, int); // drive(?), start sector, number of sectors, address. How exactly does it work?

Logged

whim

2013
A495/590/620/630 ixus70/115/220/230/300/870 S95

Re: Udumper code, can someone please explain it?

« Reply #1 on: 16 / August / 2009, 19:11:23 »

hi Radup !

there's probably people who are better qualified to answer that, but here's how i've always understood
it

Quote

#define MIN_ADDRESS 0xFF810000
#define FW_SIZE 0x400000

#define START_SECTOR 2048

/* define a function type that takes 4 int params & returns a pointer to int */
typedef int (*f_w)(int, int, int, int); // drive(?), start sector, number of sectors, address

int main() {
   int i;
   unsigned long sa;
f_w wr;

/* search for the function's adress in memory using it's signature */
     for (i=0x1900;i<0xF0000;i+=4)
     if ((*(unsigned int*)(i+0x34)==0) &&
     (*(unsigned int*)(i+0x38)==0) &&
     (*(unsigned int*)(i+0x3C)==3) &&
     (*(unsigned int*)(i+0x4C)>MIN_ADDRESS) &&
     (*(unsigned int*)(i+0x50)>MIN_ADDRESS) ) {

      wr=(f_w)*(unsigned int*)(i+0x50);

#if defined (DRYOS)
// #warning DRYOS
// jeff666: fill some memory with zeroes; "simulate" large diskboot
// WARNING: the starting address is a guess

      for (i = 0x1c00; i<0x30000; i+=4) *(int*)i=0;

#elif defined (VXWORKS)
// #warning VXWORKS
#else
#error OS type must be defined
#endif
sa=(unsigned long)wr>0xFFC00000 ? 0xFFC00000 : 0xFF810000;

      /* call the function with 4 int params to dump the firmware */
      wr(0, START_SECTOR, FW_SIZE/512, sa);
   }
   /* since we don't know what happens after, an infinite loop is safest */

   while(1);

   return 0;
}

hope it helps,

wim

Logged

*Wikia FAQ *GCC Compiler Shell for Windows

RaduP

890

Re: Udumper code, can someone please explain it?

« Reply #2 on: 16 / August / 2009, 19:22:23 »

Oh, ok, now I understand, thanks!
So the first part was looking for the signature, I was thinking it's some sort of sanity check to make sure the firmware is there. I always thought the signatures are longer

Logged

RaduP

890

Re: Udumper code, can someone please explain it?

« Reply #3 on: 17 / August / 2009, 14:12:50 »

Ok, one more quetion: Why is it searching in this address range:

Code: [Select]

for (i=0x1900;i<0xF0000;i+=4)Isn't the firmware way higher than that?

Logged

fudgey

1705
a570is

Re: Udumper code, can someone please explain it?

« Reply #4 on: 17 / August / 2009, 14:35:43 »

Quote from: RaduP on 17 / August / 2009, 14:12:50

Ok, one more quetion: Why is it searching in this address range:
Code: [Select]
for (i=0x1900;i<0xF0000;i+=4)Isn't the firmware way higher than that?

I'm just guessing, but until someone who knows better corrects me... If it's a registered event procedure or something similar, it's address will reside in RAM and it's faster to go through the entire RAM than it is to go through the entire ROM.

Logged

whoever

280
IXUS950

Re: Udumper code, can someone please explain it?

« Reply #5 on: 17 / August / 2009, 15:06:04 »

Quote from: RaduP on 17 / August / 2009, 14:12:50

Ok, one more quetion: Why is it searching in this address range:
Code: [Select]
for (i=0x1900;i<0xF0000;i+=4)Isn't the firmware way higher than that?

This is the Canon .data segment. It is initialized in the course of the OS init sequence (see boot()), and (in the current context) perhaps partly by the basic boot routine at FFFF0000 (sort-of BIOS) of the firmware. Diskboot.bin is also loaded at 0x1900, so it partly overwrites the data, which is probably why the udumper sometimes fails.

Logged

RaduP

890

Re: Udumper code, can someone please explain it?

« Reply #6 on: 17 / August / 2009, 15:11:16 »

Hmm, interesting.
So what else is it stored there? Is there a pointer to any function, or just some of them?

Logged

reyalp

11898

Re: Udumper code, can someone please explain it?

« Reply #7 on: 17 / August / 2009, 17:37:43 »

Quote from: RaduP on 17 / August / 2009, 15:11:16

Hmm, interesting.
So what else is it stored there? Is there a pointer to any function, or just some of them?

You can examine the area of ROM where this is initialized from (look for the first loop in the boot code at FFC0000 or FF81000 that copies data from ROM). There are some function pointers there, but obviously not all ROM functions.

Logged

Don't forget what the H stands for.