can't get long exposure times on SX10IS - General Help and Assistance on using CHDK stable releases - CHDK Forum
« previous next »
Pages: [1]   Go Down

can't get long exposure times on SX10IS

  • 4 Replies
  • 6315 Views
*

Offline jon_bondy

  • *
  • 2
can't get long exposure times on SX10IS
« on: 21 / August / 2009, 18:46:36 »
Advertisements
I've tried to enable long exposure times, but the maximum I get is the stock 15 seconds.

Extra Photo Ops, Disable Overrides is Disabled

Override Shutter Speed is 2048 (the biggest number I could find)

Value factor is 1 (the only other option is Off)

When I go into Tv mode (on the dial), I see a Tv value of 2048 on the display, but the shutter speed maxes out at 15"

I must be missing something.

Thanks!

Jon
Logged
*

Offline fe50

  • ******
  • 3152
  • IXUS50 & 860, SX10 Star WARs-Star RAWs
    • fe50
Re: can't get long exposure times on SX10IS
« Reply #1 on: 21 / August / 2009, 19:31:07 »
Hello & welcome, Jon !
Quote from: jon_bondy on 21 / August / 2009, 18:46:36
I've tried to enable long exposure times, but the maximum I get is the stock 15 seconds.
Extra Photo Ops, Disable Overrides is Disabled
Override Shutter Speed is 2048 (the biggest number I could find)
Value factor is 1 (the only other option is Off)
When I go into Tv mode (on the dial), I see a Tv value of 2048 on the display, but the shutter speed maxes out at 15"
I must be missing something.


...since the SX10 have the extra long exposure (that means: no limitation), just ignore the 64s hint...:

Quote from: fe50 on 06 / August / 2009, 07:44:06
Quote from: Markeight on 06 / August / 2009, 05:23:21
The Manual mode give me the possibility to bring the exposure up to 15 second, but i'd like to have more.
In chdk "Extra photo operation" i can set the Aperture up to 28.40 sec, but than my camera still uses the 15 second on the manual mode.

No, with CHDK you can set up & use up to 64s on your SD750.

You can either choose one of the values in Override shutter speed - or you can use this setting in combination with the next menu item, the Value factor, for this set Shutterspeed enum type to [Factor]...

Sample:
Override shutter speed  [23]
  Value factor          [1]
Shutterspeed enum type  [Factor]
gives you 23 x 1 = 23 s exposure time.

The Canon OSD don't know anything about the CHDK overrides, it only shows values from the internal Canon list,
so on exposure times beyond the Canon limit of 15s the Canon OSD will always show "15s"...

You can enable the additional CHDK OSD values from the OSD (Misc...) menu to see the "real" override values...
Logged
*

Offline jon_bondy

  • *
  • 2
Re: can't get long exposure times on SX10IS
« Reply #2 on: 22 / August / 2009, 07:11:49 »
Thank you!  The "trick" was enabling the "factor" mode.  I just took some 60 second exposures.

After the 60 second exposure, there is a 60 second "busy" period.  Any idea what the camera is doing during the second minute?

:)
Logged
*

Offline fe50

  • ******
  • 3152
  • IXUS50 & 860, SX10 Star WARs-Star RAWs
    • fe50
Re: can't get long exposure times on SX10IS
« Reply #3 on: 22 / August / 2009, 08:06:42 »
Quote from: jon_bondy on 22 / August / 2009, 07:11:49
After the 60 second exposure, there is a 60 second "busy" period.  Any idea what the camera is doing during the second minute?
The camera takes a Dark frame, you can set up the behaviour in the RAW menu (now it's labeled "Dark Frame subtraction", in older CHDK versions it was "Noise reduction"):

Auto - let Canon decide
On - always take a DF
Off - no DF at all

(Although it resides in the RAW menu - this is a general setting, not only for RAW images, also for JPG's)
Logged
*

Offline reyalp

  • ******
  • 14128
Re: can't get long exposure times on SX10IS
« Reply #4 on: 22 / August / 2009, 18:15:47 »
Of course, a 60 sec exposure without dark frame will look rather nasty ;)
Logged
Don't forget what the H stands for.
Pages: [1]   Go Up
« previous next »
 

Related Topics


SimplePortal © 2008-2014, SimplePortal